Used Affri Hardness Tester for sale (1,670)

Condition: used, Hard stone slab, granite slab, granite block, measuring cube Hard stone block, angle block precisely machined on all sides The granite slab comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm Nodpfx Ajh Uhq Djkyecr - 5 support blocks with leveling screws approx. 400 mm - 8 threaded bushes in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushes M16 - Small chipping on one edge of the top Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of measuring plate: 1500 kg Weight of granite feet: 100 kg very good condition

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block precisely machined on all sides Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm - 2 drillings Ø 80 mm - 2 drillings Ø 120 mm - Threaded inserts mainly M16, some with M12 and M18 Njdeg Uar Depfx Akyecr Net weight: 570 kg Good condition

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Nodpfxsf Axn As Akyscr Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A Nodpfx Aksd Dc Unoyscr - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Njdpfexqxt Iox Akyjcr Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Nsdpfx Ajxqxw Tskyjcr Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Ncsdpfx Ajifpg Ajkysr Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device Ncedpfeyid Nwsx Akysr - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), SIEMENS BCS Coagulation Analyser The fully automated Siemens BCS haemostasis system supports the user in performing efficient coagulation diagnostics. Due to the extensive parameter spectrum and the high throughput capacity, the system can be used in a wide range of applications. Thus, the BCS can be used as a high-throughput analyser as well as a special analyser. Item condition: used untested Scope of delivery as shown Further articles - new and used - can be found in our shop! Ncodpfsh Dpxpox Akyjr International shipping costs on request!

Year of construction: 1996, condition: used, Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Nsdpovw Al Esfx Akyocr Max. mechanical speed: 50 cycles/min -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, This listing is for The Palltronic Flowstar XC The unit is in full working condition and is ready for immediate use Nedpjydqf Defx Akyocr The Palltronic Flowstar XC is a filter integrity testing instrument used mainly in biopharmaceutical, lab, and industrial filtration environments. It’s part of the Flowstar family of integrity testers designed to assess the performance and integrity of filters by directly measuring flow, which helps ensure that filtration systems are operating correctly and safely

Condition: ready for operation (used), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible. Ncjdpoycigwefx Akyjr

Year of construction: 2023, condition: ready for operation (used), A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible. Ncodpfoxghn Hex Akyor

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Ncedom H Uqkjpfx Akyor

Condition: used, Technical details: Surftest SJ-210 Year of manufacture (purchased): 2017 Price: EUR 1,500 Granite surface plate 400 x 250 x 70 Ncjdpfoyhwncsx Akysr Price: EUR 850

Condition: used, Year of construction: 1992, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Flatness of the measuring surfaces < 1µm Slightly damaged corners, measuring surfaces are in order Measurement report on request for an additional charge Ncsdpfxsq Tdh Es Akysr

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar Ncsdpjycczuofx Akysr -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg Nedpfx Aoyccvfskyscr

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. Nsdpfx Aksyapwkeyscr The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Njdpfx Akeyankisyjcr Description: For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery. Ncodpfotvm Smjx Akysr

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-1, overall weight: 400 kg, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is an automated leak testing system from the renowned manufacturer Zeltwanger. The F56BEV system is designed for precise and reproducible leak and tightness testing in industrial production environments, making it ideal for both serial and random-sample inspections. Technical Data: Manufacturer: Zeltwanger Type / Model: Leak Testing System F56BEV Project No.: 51720166 Machine Number: 51720166-1 Year of Manufacture: 2018 CE Marking: Present Ncjdpeydl Dnefx Akyjr Electrical Data: Connection: 230 V / 1~ / 50 Hz Max. Fuse Protection: 16 A Max. Power Consumption: 10 A Power Input: 0.5 kW Supply Line: 3 × 1.5 mm² Control Voltage: 24 V DC Mechanical / Pneumatic Data: Machine Weight: approx. 400 kg Pneumatic Supply: min. 5 bar (oil-free compressed air) Advantages & Features: High-precision leak and tightness testing Robust industrial-grade design Low energy consumption Compact construction Easy integration into existing production lines Proven Zeltwanger quality Typical Applications: Automotive industry & suppliers Plastics and metal processing Medical technology Industrial and special machinery construction Quality assurance / end-of-line testing

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-2, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is a high-quality leak testing machine from the renowned manufacturer Zeltwanger, known for precise and reliable testing and automation solutions in industrial applications. The F56BEV system is ideally suited for automated leak testing of components and assemblies, impressing with its compact design, easy integration, and robust industrial construction. Technical data: System designation: Leak testing F56BEV Project No.: 51720166 Machine No.: 51720166-2 Year of manufacture: 2018 CE marking: available Electrical data: Supply voltage: 230 V / 1~ / 50 Hz Max. fuse rating: 16 A I-Max: 10 A Power consumption: 0.5 kW Supply cable: 3 × 1.5 mm² Control voltage: 24 VDC Mechanical / Pneumatic data: Machine weight: approx. 400 kg Pneumatic supply: min. 5 bar (oil-free compressed air) Highlights: - Proven Zeltwanger quality Ncodeydd Uxepfx Akysr - Ideal for series and single-part testing - Robust industrial construction - Low power consumption - Compact design - CE compliant Fields of application: - Automotive industry - Supplier industry - Medical technology - Plastics and metal processing - General custom machine engineering

Condition: used, This listing is for a Sartorius Sartocheck 3 Plus Filter Integrity Tester. The unit is in full working condition and is ready for immediate release. The Sartorius Sartocheck 3 Plus Filter Integrity Tester is an advanced instrument designed for the precise testing of membrane filter systems, making it essential for biochemistry and pharmaceutical applications. Here’s a detailed breakdown of its features and specifications: Key Features: Microprocessor Control: Offers programmable protocols for testing filter systems, allowing users to store up to 60 programs directly and expand to 240 with a memory card. Integrity Testing: Designed to ensure the integrity of membrane filters, minimizing the risk of using defective cartridges. Comprehensive Testing Protocols: Includes a variety of tests such as: - Diffusion Test - Bubble Point Test - Combined Diffusion and Bubble Point Test - Water Intrusion Test - Water Flow Test - Pressure Drop Test - Multipoint Diffusion Test - Data Reporting: Generates complete paper reports to meet cGMP requirements, detailing: - Test parameters (pressure, time) - Results (net volume, pressure drop, evaluations) - Filter cartridges used and products tested - User-Friendly Cleaning Protocol: Provides on-screen instructions for cleaning, compatible with any cleaning reagent due to its stainless steel construction. Manufacturer Specifications: Power Requirements:Operating Voltage: 100-240 V ±10% Phases: 1 Ph/N Grounding Conductor: Separate SL (yellow-green) Frequency: 47-63 Hz Protection Rating: IP 44, indicating resistance to dust and splashing water. Nsdpfx Aksxxyarsyjcr Pressure Specifications: Maximum Operating Pressure: 10 bar g Operating Pressure: Minimum 4 bar g Internal Limit Pressure: 10 bar g Maximum Power Input: 74 Watts Installation: Must adhere to VDE regulations.

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. Njdpfxexhckle Akyecr At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.