Used Agi Grainvacvr12 for sale (480)

Condition: ready for operation (used), Agie Low Power Supply LPS-20 A 645914.3, used, minimal signs of wear, 100% functional. Nlodpfxsi D Twle Ac Tec

Condition: ready for operation (used), Agie MJG 2129 D stepper motor driver, part number 622064.4. Used, shows minor signs of wear, 100% functional. Scope of delivery as shown in the photos. Nedpfxji D Twze Ac Tolc

Condition: ready for operation (used), AGIE PMO-01 A2 power module, output 613 930.7, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfx Acsi D Txbe Tsc

Condition: ready for operation (used), AGIE POI-01 A2 Power Output Interface 613950.5, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfji D Txmex Ac Tsc

Condition: ready for operation (used), Agie STB-06 A1 signal terminal block, part number 621802.8, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Njdpfx Aoi D Tynsc Tolc

Condition: ready for operation (used), Agie VCB-01A video controller board, part number 629793.1, used, with minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfx Aji D Tyvsc Telc

Condition: ready for operation (used), Agie video controller board VCB-01 A 629.793.1, used, minor signs of wear, 100% functional. Nodpoi D Tyyofx Ac Tolc

Condition: ready for operation (used), Agie DBE-01 A3 digital bidirectional expansion. 625854.5, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nlsdpfxsi D Tvns Ac Toc

Condition: ready for operation (used), Agie Low Power Supply LPS-20 B, 617.941.0, used, minimal signs of wear, 100% functional. Nledpji D Twpsfx Ac Tec

Condition: ready for operation (used), Agie LPS/03 A2 Low Power Supply. 629 722.0, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nlsdoi D Twtspfx Ac Toc

Condition: ready for operation (used), Agie MJG 4014 D measuring circuit for conductivity. 619 782.6, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nljdsi D Tw Nspfx Ac Tjc

Condition: ready for operation (used), Agie Power module, output PMO-01 A, 613.930.7, used, minor signs of wear, 100% functional. Njdpfxoi D Txqs Ac Tjlc

Condition: ready for operation (used), Agie Power module, model PMO-03 B 616.021.2, used, minor signs of wear, 100% functional. Nljdoi D Tx Hepfx Ac Tjc

Condition: ready for operation (used), Agie process regulator device PRD-10 B 614.130.3, used, minimal signs of wear, 100% functional. Nledpfx Acji D Tyko Tec

Condition: ready for operation (used), Agilent / Keysight N3300A electronic load mainframe SN: MY41001791, used, in good condition, 100% functional, delivery as shown in the photos. Nsdpfxjx Eqrbe Ac Telc

Condition: used, mileage: 32,789 km, power: 92 kW (125.09 HP), first registration: 03/1958, fuel type: diesel, empty load weight: 5,670 kg, maximum load weight: 3,630 kg, overall weight: 9,300 kg, axle configuration: 4x4, wheelbase: 3,680 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 7, total length: 6,500 mm, Equipment: all wheel drive, Non-binding offer - Subject to alterations and prior sale - Sale is subject to exclusion of any warranty - All information without guarantee! Nlodewm Nudopfx Ac Toc

Condition: used, Year of construction: 2013, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Nledpfjzcdtxex Ac Tec Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Nlodpfxszcxn Dj Ac Tec Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: used, mileage: 52,791 km, power: 184 kW (250.17 HP), first registration: 11/1964, fuel type: diesel, empty load weight: 23,470 kg, maximum load weight: 1,530 kg, overall weight: 25,000 kg, tire size: 11.00R20, axle configuration: 6x6, wheelbase: 3,775 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 2,500 mm, total width: 3,300 mm, Year of construction: 1964, Equipment: all wheel drive, cabin, cable winch, Vehicle location: Bovenden. Double passenger bench, rear window, 6-speed manual gearbox, rotating beacon, winch. Wheelbase: 3775 mm. Body: Crane truck type F Uranus 7, crane capacity: 16,000 kg, 360° slewing range, 6x6 drive. The Magirus-Deutz Uranus was a truck model produced by the German commercial vehicle manufacturer Magirus-Deutz in Ulm. With 250 hp from an air-cooled V12 engine by Klöckner-Humboldt-Deutz, the Uranus was the most powerful truck produced in Germany at its time. This heavy, three-axle vehicle was introduced to the market in 1954 as the A12000 Uranus and served as a chassis for fire brigade and military crane trucks as well as heavy-duty tractors. Additional variants existed as tractor units and dump trucks, primarily for export. This particular vehicle is a collector’s piece in superb condition, with an interior that has been excellently preserved in original state, reflecting the vehicle’s very low mileage. Included with the vehicle are the original spare parts catalogue, operating instructions, and user manual. The vehicle has undergone a restoration costing approximately EUR 150,000! Acquisition cost prior to restoration was EUR 80,000! Nodpfx Acovhg Ifs Tjlc Dimensions: length 8,200 mm, width 2,500 mm, height 3,300 mm. Complete set of documents/history available. The vehicle originates from the Ulm fire department. Fitted with 10 new Michelin tires. DREAM condition! The above accessory information is provided without guarantee. Subject to change, prior sale, and errors.

Condition: used, mileage: 52,791 km, power: 184 kW (250.17 HP), first registration: 01/1964, fuel type: diesel, empty load weight: 23,470 kg, maximum load weight: 1,530 kg, overall weight: 25,000 kg, tire size: 11.00R20, axle configuration: 6x6, wheelbase: 3,775 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, total length: 2,500 mm, total width: 3,300 mm, Year of construction: 1964, Equipment: all wheel drive, cable winch, Vehicle location: Bovenden, double bench seat, rear window, 6-speed manual transmission, rotating beacon, winch. Njdpfevhg R Hex Ac Telc Wheelbase: 3,775 mm. Body: crane truck type F Uranus 7, crane capacity: 16,000 kg, 360° rotation. The Magirus-Deutz Uranus was a truck model manufactured by the German commercial vehicle producer Magirus-Deutz in Ulm. With 250 HP from an air-cooled V12 engine made by Klöckner-Humboldt-Deutz, the Uranus was the most powerful truck produced in Germany at the time. This heavy, three-axle vehicle was introduced in 1954 as the A12000 Uranus and served as a chassis for fire brigade and military crane trucks as well as heavy-duty tractors. Other versions included articulated tractors and dump trucks, mainly for export. This particular vehicle is a beautifully preserved collector’s item with an interior that is in outstanding original condition, which can of course be attributed to its very low mileage. Included with the vehicle are the original spare parts list, original description, and operating manual. The vehicle underwent restoration at a cost of approximately €150,000! Purchase price before restoration: €80,000! Length: 8,200 mm, width: 2,500 mm, height: 3,300 mm. Complete documentation/history available. The vehicle comes from the Ulm Fire Department. Fitted with 10 new Michelin tires, DREAM CONDITION! ACCESSORY INFORMATION WITHOUT GUARANTEE. Specifications subject to change, prior sale and errors excepted.

Condition: used, mileage: 34,100 km, power: 92 kW (125.09 HP), first registration: 10/1957, fuel type: diesel, empty load weight: 5,670 kg, maximum load weight: 1,820 kg, overall weight: 7,490 kg, tire size: 8.25-20 EHD, axle configuration: 4x4, energy efficiency: F, CO₂ emissions: 601 g/km, color: red, driver cabin: other, gearing type: mechanical, number of seats: 6, total length: 2,350 mm, total width: 2,800 mm, front tire size: 8.25-20 EHD, rear tire size: 8.25-20 EHD, Equipment: all wheel drive, Vehicle location: Bovenden, Klöckner H-Deutz TLF 16/53, TLF 16/25 A3500/6 Year of construction:1957 The sale to tradesmen or export is subject to 19% VAT. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Njdovhlhdjpfx Ac Tslc - .

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Smooth speed adjustment Feed motor power: 0.25 kW Feed rotation: left/right Nljdev Uz S Sopfx Ac Tec Safety switch Manual spindle height adjustment Table width: 104 cm Table length: 98 cm Machine construction: cast iron

Condition: used, Technical specifications: Max. saw blade diameter: 400 mm Scoring blade diameter: 120 mm Scoring blade powered by a separate motor Manual saw blade height adjustment Nlsdszd Ehfopfx Ac Tjc Tilting saw blade from 0° to 45° Manual saw blade tilt angle adjustment Table length: 3200 mm Table lock Table extensions Fence Guide rail with 2 stops Safety switch Power supply: 380 V Main motor power: 5 kW Overall dimensions: Length: 3260 mm Width: 3300 mm Height: 1000 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 2,379 h, X,Y,Z Travels 350mmx 250mm x 250mm U, V Travel ±45 Nedpfxsygc Sze Ac Tolc Taper angle/height ±30 Max. Part dimensions 820mm x 680mm x 250mm Max. Part Weight 400kg Speed of axis movement (XYZ) 6mm/min Anti-collision protection for axes X,Y,Z Wire Diameter Range 0,1mm-0,3mm Dimensions of complete equipment 1750mm x 2.470mm x 2.200mm Total weight of equipment without dielectric 2.500kg Equipped With: AC Cut HMI Control W/ 19" Touchscreen Control IPG-V Generator with HMI2 Control Auto Wire Threading Submerged Glass Scales Chiller Transformer

Condition: used, Year of construction: 2008, machine/vehicle number: 558-08, travel distance X-axis: 4,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, MOBILE VERTICAL MACHINING CENTER “FAGIMA” MODEL SPIN ARROW CNC SELCA S4045 PDH ISO 50 spindle Spindle speed: 10,000 rpm Nledpfx Ajy S Anbec Tsc Power: 15 kW