Used Atlantic Ats 3006 for sale (701)

Condition: excellent (used), RMS Vibrations Vibration Testing System Here we offer you an RMS electrodynamic vibration testing system. RMS Vibrations Vibration Testing System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Untested! Tests were not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax. Ledpfjzdtc Dsx Ammeac

Condition: used, mileage: 14,215 km, power: 81 kW (110.13 HP), first registration: 05/1980, fuel type: diesel, overall weight: 6,500 kg, gearing type: mechanical, number of seats: 2, Year of construction: 1980, Equipment: all wheel drive, crane, Very well-maintained Unimog U1100 from first owner. Equipped with an Atlas AK 3006 A crane featuring 1x hydraulic extension, a maximum working height of 10 meters, and 5th & 6th hydraulic functions (e.g. for grab or bucket). The vehicle has only 14,215 km and 839 operating hours. Collector’s condition. * Atlas AK 3006 A * 3,300 kg at 2.93 m * 1,620 kg at 4.77 m * 1,200 kg at 6.07 m * Optional: 3x mechanical extensions * 980 kg at 7.42 m * 730 kg at 8.73 m * 520 kg at 10.04 m Lodpfx Amszdcvzsmjac * Working height: 10 m * Additional control circuit on crane (e.g. for rotator or grab) * 4-point outriggers * Remote control * Front hydraulics (e.g. for snow plow) * Selectable all-wheel drive with differential locks * 2x trailer hitches * Reversible gearbox with 8 forward + 4 reverse gears * Air-suspended driver’s seat * Engine: OM 352, 6-cylinder, 5,638 cm³, 81 kW * Registration as self-propelled work machine possible * Odometer: 14,215 km * Operating hours: 839 * Vehicle is from first owner Financing available through our partner banks, we are happy to assist you. Please note: Intermediate sale reserved, as this item is also advertised on other platforms. Accessories information without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend viewing and inspection to ensure buyers have a correct impression of the vehicle’s condition and suitability. Inspections and test drives are possible anytime by appointment and are expressly desired.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min Lodpfx Aex S Hmzjmmjac - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Lajdpfjzdqttjx Ammec Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 24 Total number of tool changer positions: 16

Condition: used, Year of construction: 1991, machine/vehicle number: 91033420, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2020, working width: 3,050 mm, We offer this used HACO TS 3006 guillotine shear and press brake, manufactured in 1991. Manufacturer: HACO Type: TS 3006 Year of manufacture: 1991 Voltage: 380 V Capacity: 3050 x 6 Serial number: 91033420 Electric length stop Sale exclusively to businesses, with exclusion of any warranty, guarantee, return or conversion, to the extent permitted by law. The machine is sold in its current condition ("as is"). Information regarding technical data, condition, operating hours, accessories and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations and legal requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer's warranties or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). Ledpfx Ajzdzh Uommsac If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, mileage: 1,001 km, color: blue, driver cabin: other, gearing type: other, Vehicle location: Bovenden, 2-point support system, mechanical, 1x hydraulic extension. Laedpfxsi Rpfhe Ammoc Superstructure: Loading crane, e.g., for Unimog, with gripper control. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Lajdpsxqmqzjfx Ammjc

Condition: ready for operation (used), Year of construction: 2020, total height: 2,500 mm, number of axes: 4, This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Additional equipment • Dust & Fume Extraction System: • Air Flow: 12000 m³/h • Filter Area: 171 m² Ledpfx Aezbcmujmmoac Machine Benefits Technical Machine Benefits • Cutting table size: 3000 × 6000 mm • Tubes cutting capability: yes • Control system: texnos pc 12 or hypertherm microedge pro • Software: hypertherm cam / cnc with arcglide thc height control • True hole technology: supported with hprxd system – enables high-quality hole cutting up to 12 mm thickness. Extra Information Machine still under power Dimensions Machine Depth 8100 mm

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Lasdpfsy U Naiox Ammoc Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Lasdpfx Aozaqm Hommjc Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h Lodey Ayiqspfx Ammjac BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: excellent (used), Year of construction: 2001, Ott Atlantic V/12 edge banding machine Joining unit Lajdotdz Tqspfx Ammjc snipping, 2 x routing, radius scraper, surface scraper Edge thickness: 0.2 - 12 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 2001 price 10000

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Type: VS 3006 Lsdpfxowrx Taj Ammjac Year of manufacture: 2006 Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Lodpfx Ajrx Sydommjac Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: new, Year of construction: 2022, Guide-rail guided plate shear VS 3006 with sheet metal holding device DURMA IV – special price* – demonstration machine Laodpfxof U Th Ej Ammec Operating hours: 0 hours Sheet thickness: 6 mm Cutting length: 3,080 mm Cutting angle: 0.5 – 2° Back gauge: 1,000 mm, CNC-controlled Motor power: 11 kW Length: 4,100 mm Width: 2,050 / 3,650 mm Height: 1,950 mm Oil capacity: 125 l Weight: 7,500 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will gladly provide you with further information. *plus transport and installation costs

Condition: new, Year of construction: 2025, Equipment: CE marking, Plate shear with pneumatic sheet metal holding device Ledpfxod Ewubs Ammoac Cutting length 3100 mm Sheet metal thickness MS (450 N/mm²) 6 mm Sheet metal thickness SS (700 N/mm²) 4 mm Strokes per minute 15 1/min Cutting angle 1° 30’ Number of clamps 16 pcs Maximum clamping force 14 t Back gauge 1000 mm Back gauge speed 200 mm/sec Motor power 15 kW Oil tank capacity 200 l Overhang 50 mm Support arms 2 pcs Support arm with side stop Table height 865 mm Table width 500 mm Table length 3515 mm Machine length 4110 mm Machine width 2200 mm Overall width 3700 mm Machine height 2100 mm Weight 7650 kg High-performance steel construction St 44 & stress-relieved, annealed machine frame D-Touch 7 touchscreen CNC control, user-friendly, central cutting angle adjustment Ball screw, 1000 mm & automatic tilting Support balls in the table for better material handling Side stop with scale & T-slot and tilting stop Support arms with T-slot and tilting stop Cutting line lighting & 1 m retractable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling back gauge Cutting line lighting Foot pedal CE standard for EU The machines can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, Sawblade tiltable 45 ° Motor output 11 kW Cutting height ca. 280 mm Lsdpfx Ajypwaxommsac Saw blade diameter 780 mm Large mobile timber circular saw A.Reckers type ATS for various sawing tasks in workshops or on construction sites.

Condition: used, Year of construction: 2013, total length: 4,110 mm, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Weight: 7.250 kg Price: On request - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No Ljdjytgapjpfx Ammjac - Serial number: 607913428 - Drive system: CNC - Control system brand: Durma - Control system type: D-Touch-7 - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 15 - Throat depth [mm]: 150 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Finger guard: Fixed - Transport dimensions: 4110mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 7250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2012, total height: 1,600 mm, total length: 5,250 mm, total width: 1,440 mm, Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Chopping saw Milling unit Milling unit Corner rounder Radius scraper Lodpownhb Sofx Ammsac Flat scraper Cleaning unit Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No - CE certificate present: No - Transport dimensions: 5250mm x 1445mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working range X: 3200 mm Working range Y: 1330 mm Working range Z: 170 mm 5-axis electrospindle, power 11 kW Drilling heads for vertical drilling: 16 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 4 2 blades for grooving in X and Y directions Lateral linear tool magazine with 10 positions Revolver tool magazine with 16 positions Work table with 6 stops Automatic lubrication system Air conditioning system for the electrical cabinet Vacuum pump with a capacity of 250 m3/h Lasdpfx Amsy S Av Ejmsc Control: BHC 660 Control panel Safety mats Protective netting Available from mid-July.

Condition: used, Year of construction: 1992, gebraucht 1992 090174 Belgien 17800 € 1 3050 mm 6 mm 11 - 25 1/min 0.5 - 3 ° 18 750 mm 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Ljdpfxoyi Hppo Ammoac • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21-2584 BE ATS, type of input current: three-phase, total height: 1,680 mm, input voltage: 400 V, total width: 2,950 mm, total length: 1,800 mm, air demand: 38 m³/h, Equipment: documentation/manual, Description: For sale: Automatic Cartoning Machine SOCO PACK BE-2200 ATS (RIGHT) High-speed automatic carton erector with bottom sealing module and conveyor Basic information: Model: SOCO BE-2200 ATS RIGHT Type: Automatic carton erector with bottom tape sealing Version: Right-hand (RIGHT) with CE enclosure Condition: New / very well maintained, ready for immediate operation Location: EXW Prešov, Slovakia Technical specifications: Capacity: High-speed operation – suitable for fully automated lines Power supply: 3 x 400 V AC, 50 Hz, 0.5 kW Air consumption: 38 l/cycle, min. 6 bar Discharge height: Adjustable: 560 – 850 mm Pneumatic components: FESTO Control system: Siemens S7-1200 PLC with touch panel and Ethernet connection Operating languages: English, German, Slovak Equipment and features: Automatic bottom carton sealing with tape Horizontal motorized carton magazine (length 1500 mm, capacity approx. 190 cartons) Magazine setup using counter and hand crank – quick format changeover Touchscreen control panel with cycle management, alarms, and demo mode Safety sensors with end-of-conveyor alarm Lajdpoy Exa Hjfx Ammoc Pneumatic stop system A-60 + powered roller conveyor (1230 mm, height 490–700 mm, speed 20 m/min) Color: RAL 9006 (aluminium grey, powder-coated) Accessories: Extension kit for 0.5 L and 0.7 L cartons Feeding brush for square cartons Vacuum suction cups (2 pcs) – cover the full required size range Flap spreader for bottom flaps – suitable for thin or 5-ply cartons Tape monitoring sensor (optional): detects empty tape, breakage, or incorrect application

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration Lajdpfx Aeyxxxvsmmec

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Model: TS-3006 Power: Three-phase 380V Laodpfx Aowx Ix Semmjc Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. Lajdpfsh Txlcex Ammoc 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head