Used Ausspindelkoepfe Tools And Accessories for sale (53,556)

Condition: used, This listing is for a Hook and Tucker Rotamixer vortex mixer Lajdpfx Amexzhk Ro Nja

Condition: good (used), Fuchs Terex MHL430 machine for sale. The machine is from 2002. Liebherr 924 Litronic machine for sale. Lasdpfopq R Sxjx Am Nsa The equipment is from 2007

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys Ledpfx Amot Nf Ips Neaa - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Installation in very good working condition. Belwo you can find our offer for VOLVO L180E. For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc Lajdpfx Ajxta U Ejm Noa 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: good (used), Food Tools CS1000CE Automatic round cake cutter Serial: 3190 Ledpfjwmdc Asx Am Njaa This cake slicer is capable of cutting a variety of frozen round products including cheesecakes, layer cakes, ice cream cakes, pies and more. The machine is best for bakeries producing 200 or more products per hour

Condition: good (used), Year of construction: 2015, Food Tools CS4AAC round cake slicer Serial: 5253 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile Lodpfxowmdb Ss Am Noaa

Condition: used, Manufacturer : Turbo tools ltd Model: NMD888 Type : piston dosing machine Mode : Automatic / semi-automatic (shot by shot) Operation: pneumatic Foot pedal action Adjustable dosing pump Feeding hopper Stainless steel Lasdsx R Avcjpfx Am Nsa 2 sets of filling heads available

Condition: new, Year of construction: 2026, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated! Lsdpfx Asmhhn Ejm Njaa

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, WE OFFER AN NICE CONDITION SAW PEGAS AND GONDA HERKULES X-CNC 350X 400 with rollers and many new reserve blades Laedpfxsvznkbo Am Nja MACHINE WAS USING IN FURNITURE PRODUCTION FOR CUTTING METAL TUBES FOR CHAIRS AND OTHER FURNITURE WITH MACHINE INCLUDED A LOT SPARE BLADES, RAILS CONVEYOR FOR WASTE WHEN MACHINE CLEANED WILL LOOKS AS NEW. WE CAN ORGANIZE FOR CUSTMER ALSO TRANSPORT WOLDWIDE

Condition: excellent (used), 4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm Specifications Manufacturer KONI Model 14000KG Condition Used Stock Number 0066 Brand Koni Capacity 14000 kg Lifting height 16350 mm Path width 700 mm electric Ljdpfx Aovkpi Rem Njaa Connection 400 V Total dimension l 8000 mm Total dimension w 4000 mm Total dimension h 2400 mm

Condition: excellent (used), Year of construction: 2004, Description ELECTRIC SWITCH AND PLUGS PRODUCTION WITH KNOW HOW Selling complete socket and switch production with KNOW HOW Production include: 1.1- PLASTIC INJECTION MACHINES 2X 1. 51 of moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 22 of stamping tools for steel parts underconstruction of bottom underconstruction switches and plugs 3. 40 of machines for assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 100.000 parts on stock to assemblle 5. Stamped metal products parts - over 100000 on stock 5. Packed finished stock of aprox. 3500 switches ready to sell in different types and models. 6. testing equimpent for quality for switches. Lsdpfevk Unljx Am Neaa 7. Complete production information,documentation, drawings with buyers list , price lists, calculations etc. 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company had ISO 9001 AND IT WAS CERTIFICED FOR ELECTRIC SWITCH PRODUCTION ACCORDING TO EU - GERMAN STANDARDS. To start up need space area from 300 to 400 square meters of production space FOR TRANSPORT WILL BE NEEDED 3 BIG TRUCKS TRAILERS.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, WE OFFER AN VERY NICE CONDITION INDEX WITH FULL EQUIPMENT AND TOOLINGS. MACHINE IS IN FULLY WORKING CONDITION. WE OFFER AN NICE CONDITION INDEX WITH Control FANUC 21i-TA DRIVEN TOOLS AND EQUIPMENT Max. turning diameter 310 mm max. turning length 1,470 mm Hollow clamping cylinder diameter 80 mm HOLE TROUGH SPINDEL 95mm Rapid traverse 12 m/min Tool positions 16-way turret / 4 driven C-axis division 1-locking bolt 2.5 degrees 2-locking bolt 0.5 degrees Speed range level 1: 20-2000 rpm level 2: 40-4000 rpm Total power requirement 40 kW Machine weight approx. 6 t Dimensions 5,350 with chip conveyor x 2,000 x 2,500 mm Control FANUC 21i-TA Year of manufacture 2002 Incl. chip conveyor Incl. tailstock Lasdpfxsvkx Nye Am Nsa Incl. steady rest Incl. documentation FOR CUSTOMER WE CAN ORGANIZE AS WELL TRANSPORT TO THEIR COMPANY..WORLDWIDE DELIVERY TO LOAD MACHINE NEED 7 LOADING METERS ON TRUCK.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Lsdpfx Amex D Tbms Nsaa Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Lasdpfxoxftqds Am Nja Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Ljdpfsxxb Rrex Am Noaa Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Low and Duff Chocolate kettle Laedpfxomqm Dzo Am Nja 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Laedpfx Amoxt Ibyj Nea Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Weighing and Bagging System, comprising of: - - Ishida Multihead Weigher (CCW-EM-214/30) - Ilapak Vegatronics VFFS Bagger (S/N: S977/00) with Zodiac printer - Hopper - Takeaway conveyor - Ishida metal detector checkweigher (DACS-W-012) Lodpfx Amjxmhh He Noaa - Gantry

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. Laodpfsx Uqyqex Am Nja The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Possibility to test with your own materials.

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Ledpfxopcibmj Am Njaa

Condition: new, Product description: The EPS 80 Touch automatic length gauging system, which can be easily mounted on a new or existing machine tool. With this system, products of different materials and various lengths can be measured easily, quickly and accurately. EPS 80 Touch is a length gauging system which is widely used in the wood, plastic, aluminum and light steel industry. The system is very easy to operate and accepts entries in millimeters and/or tenths of a millimeter. It can be set up to the left or right of the machine tool. The system is available from 1 meter and is expandable to 14 meters. Specifications of the EPS 80 Touch: Speed : up to 40 meters/min. Holding force : 1800N Accuracy : +/- 0,25 mm Voltage : 230V, control current 24V Buttons : Start, Stop, reference, measuring tongue on/off, parameter button Displays : actual value, set value Emergency stop : this button immediately stops the EPS 80 Touch Display : touch screen with large displays and clear key layout Lajdpotd Tndjfx Am Nea Attachment : very easy to turn on and off for short stretches Software : fully proprietary, kept up-to-date in-house Components : industrial components and maintenance free Cables : cables including chain conveyor are supplied up to a maximum of 14 meters. Our ads are compiled with the utmost care, type and specification errors reserved.

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON Ledpjquuv Isfx Am Njaa ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: ready for operation (used), Planing and re-saw line with below main equipment: 9 head planer type WACO 3000 Feeding speed 0 - 90 m/min Max planing width Min planing width Max planing height Min planing height Canali double bandsaw type ML1100 Marking equipment Stacker and packing machine Press for packages Ljdpfexb Aklsx Am Njaa Grinding equipment for planer. For more data and information please see below link to youtube

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm Ledpfsu Impysx Am Neaa - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg Lsdpfx Amjvki A Rj Noaa 8 St. Tool trolley filled Contents and equipment see pictures