Used Automatic Electronic Drilling Line for sale (36,857)

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. Fpodpfx Asyyb Sujagsh With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Year of construction: 2005, condition: good (used), Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages. YOC: 2005 Type of strapping: single, double strapping max speed for single strap: up to 35 bundles/min max speed for parallel (double) strap: up to 17 bundles/min max bundle dimensions (w x l): ~500 x 600 mm min bundle (package) height: ~10 mm max bundle (package) height: ~400 mm max weight bundle/package: ~25 kg Fpsdpfeh I Dimjx Aagoh Infeed / outfeed (conveying) height: ~850 mm Continuously adjustable conveyor speed Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: PP No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 190 mm Equipment: - back stop (package stop) - hold-down device - auto. height detection - interface to up-/downstream equipment - auto. strap feeding - auto. strap end detection - auto. strap loop ejection (on "no bundle cycle") Over all length equipment: ~760 mm Over all width equipment: ~1540 mm Over all height equipment: ~1600 mm Input Power: ~2 kVA Voltage: 400 V 3Ph, 50/60 Hz Air requirement: ~8l/cycle; 6 bar Weight: ~415 kg

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm Fedjh Iy Skjpfx Aageph - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm Fodeh Iy Ruopfx Aagsph - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2026, condition: new, functionality: fully functional, Boost your output with our industrial croquette machine, engineered for speed and reliability. This stainless steel croquette production line delivers up to 3,600 croquettes per hour, adjustable from 20 g to 60 g each. - Versatile 3‑in‑1 equipment: combines a 15 L electric stuffer, croquette forming machine, and industrial breading machine, perfect for croquettes, nuggets, meatballs, flamenquines, cachopos and more. - 100 % stainless steel (AISI304) construction, easy to dismantle and clean, meeting all hygiene standards. Fpjdsww Uagopfx Aageh - Variable speed control: 9–20 m/min conveyor, with interchangeable nozzles (22 mm, 25 mm, 28 mm) to customize shape and size. - High-efficiency production: consistent, professional results for your food processing equipment needs. Upgrade to this croquette production line and stand out in the food industry. Increase throughput, ensure top quality, and simplify cleaning—all in one machine!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 2000 kg Total power requirement 9 kw Fodpfjvz Eg Tjx Aagjph

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 1800 kg Fedpfx Aaovz E Dfogsph Total power requirement 6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Fpsdpfovz Evusx Aageh Weight 2000 kg Total power requirement 6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 2000 kg Fpjdpsvz Ehdefx Aagoh Total power requirement 11,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Fodpfxevz Eq Ej Aagoph Weight 1800 kg Total power requirement 6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 1800 kg Fodpovz Evzofx Aageph Total power requirement 5,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x2500x1760 mm Fpsdpfxjvz Ewxj Aagjh Weight 1500 kg Total power requirement 5,9 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x2500x1760 mm Weight 1500 kg Total power requirement 4,5 kw Fpjdpfxovz E Dxj Aagjh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x2250x1650 mm Weight 2600 kg Total power requirement 11,8 kw Fodsvz Eliepfx Aagoph

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- Fedewqg Iiepfx Aageph 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: used, Year of construction: 2021, functionality: fully functional, Fully automatic sealing packaging line PRATIKA 80-T MPS for sale! The basket sealing packaging line consists of equipment from various manufacturers, integrated into a single technological line that complies with CE safety directives and has been certified accordingly. The basket sealing packaging line consists of: · PRATIKA 80-T MPS, year of manufacture 2021 · 2 pcs. x 1.80 m conveyors with positioning system · 1 pcs. x 2,70 m conveyor Fpsdpfx Aasyxd Nmogeh · 2 pcs. x 3 m conveyors · 1 pcs. x 3,30 m conveyor (at the control panel) · 1 pcs. x 1,10 m conveyor · 2 pcs. push cylinders · Control Panel with Siemens controller · Electrical cabinet · Security fences Packaging line requires approx. 4 × 11 m of floor space. Layout on request. PRODUCTS SIZES. This line was used to package products with the following dimensions: Kompelement mesh basket size 500x350x160 mm. Productivity in hour 1470 pcs. Kompelement mesh basket size 500x580x160 mm. Productivity in hour 1260 pcs. Kompelement mesh basket size 750x350x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 750x580x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 1000x350x160 mm. Productivity in hour 840 pcs. Kompelement mesh basket size 1000x580x160 mm. Productivity in hour 744 pcs. Jonaxel mesh basket size 459x501x137 mm. Productivity in hour 1260 pcs. TECHNICAL CHARACTERISTICS PLC Programmable Logic Controller Siemens Input/output monitor HMI Siemens Conveyor system speed up to 20 m/min Packing system capacity up to 25 bags per minute with every second bag inserted Maximum packaging film thickness 50 microns Maximum packaging film roll diameter 350 mm Note: Labeling, printer, filter and lasers shown in the photos are not for sale.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm Fpodpfx Aashzbipjgsh - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Very few operating hours, installed at the beginning of 2023, in very good condition. Consisting of: 1 City e perfect binder - with PUR - with hotmelt - with cooling and drying section Wohlenberg City e perfect binder Base machine Edition 4000 for standalone or in-line operation, compatible with a Sprinter gathering machine and a three-knife trimmer Edition 5000, extended machine configuration for increased speed up to 5,000 cycles/hour Fpedeytbz Ijpfx Aagsh Mobile hotmelt spine gluing unit, 40 kg, with 2 application rollers Compact, mobile PUR spine gluing unit - Europe, with 2 application rollers Mobile hotmelt side gluing unit Cooling and drying section

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Fpsdpfx Aoyvrrqsagjh Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Fjdpjv Aalysfx Aageph Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Fpsdpfx Aajuq N Agogeh Board width continuously adjustable. Feed speed 77-118 m/min Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade 6 feed grooves Saw spindle speed 1800 rpm Maximum saw blade diameter 650 mm Weight with motor and control station 2050 kg

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Fpodpfsx Ruudox Aagoh Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. Fsdpfox Rut Tox Aageph In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder perfect binder with PUR with remote diagnostics with cooling and drying section with three-knife trimmer - System DGR D09 with compressor Base machine for standalone or inline operation for linking with a three-knife trimmer Equipment: - rotary cover feeder with integrated vacuum technology Winjector R - creasing station with split creasing tools for two and four grooves - cover alignment and pressing station incl. 1 set of standard press bars - lifting unit with gripper system for lightweight products - stack delivery (upright delivery) - industrial PC with TFT color display and touch-screen functionality Fsdpeimqucofx Aagjph - graphical user interface Navigator E - motorized thickness adjustment * Mobile PUR spine gluing unit – Europe for the production of perfect bound brochures with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR drum melter * Cooling and drying section * Hotmelt side gluing unit mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of perfect bound products in offline or inline operation -Offline or inline operation possible * Compressor unit 1800 dm³/min.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. Fpjdpfex N Iclex Aagsh U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6