Used Baka Efz-5,0 for sale (246)

Condition: used, Gear motor, electric motor, three-phase motor, door drive, roller door drive, sectional door drive, electric gear motor, electromat -Manufacturer: GfA, Elektromat type SE 3.5.120-25.00 -Speed: 120 rpm -Motor: Siemens, power 0.37 kW Iodpfxjd Sx Nko Adkjtg -Shaft: Ø 25 mm -Protection class: IP 55 -Dimensions: 375/140/H245 mm -Weight. 12 kg

Condition: good (used), Belt conveyor with a width of 0.8 m and a length of 5.0 m Isdswynl Ispfx Adkstg

Condition: excellent (used), GRUNDFOS PUMP TP80-400/2 Item: D-5490-Grundfos pump Itedpfx Aol I R T Nsdkjg USED WATER PUMP, GRUNDFOS Type TP80-400/2, 15,0 kW, Bar/C - 16/120 Q - 114,8 m3/h H - Max 34,7 m O/m- 2940 Nice condition 3 pieces identical

Condition: new, die cushion stroke: 200 Itjdpfxod Ab Iks Adksg

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Ijdpfxod Ab Ils Adkotg

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Itjdpfx Aded Ab Imjkog

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Itsdoynky Ajpfx Adkeg Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: good (used), Year of construction: 2018, operating hours: 2,152 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 2,152 km, This electric triplex stacker by Still from 2018 is in very neat condition; ONLY 2,152 hours. The capacity is 1,400 kg; The stacker lifts up to a height of 5,016 mm; Overhead clearance 2,165 mm; Equipped with FREELIFT; The 2018 battery features an automatic filling system and an external charger. Schedule an appointment for a test drive. Watch the video on YouTube. Itedpfew Snc Aox Adkeg

Condition: used, 5,000 running meters of construction profiles, C-shape Used goods, good condition, see pictures Galvanized Length per piece approx. 467 cm Profile 7.5/8 cm Material thickness approx. 3 mm Weight per piece approx. 30 kg Itedpfx Asulwmcedkjg Negotiated price: € 3.90 net/rm ex stock Available individually or in a package One package consists of 40 pieces - approx. 186.8 running meters Goods are in stock. Transportation possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: excellent (used), functionality: fully functional, Insulated 15,000 L Tank with Agitator and Vacuum Function Capacity: 15,000 litres Design: Vertical, insulated tank Equipment: Mechanical agitator Special feature: Operation under vacuum conditions Itodpfx Asy Sbxxsdkeg Professional process tank made of stainless steel, designed for the storage and processing of products requiring stable temperature control and mixing. Thanks to its insulating layer, the unit perfectly maintains the thermal parameters of the contents, which is crucial in the dairy, food, and chemical industries. Key Features: - Agitator: Ensures thorough homogenization of the product, preventing liquid stratification or settling of solid particles at the bottom. - Vacuum system: Enables deaeration of the product or suction of powder and liquid components directly into the tank without contact with the external environment, enhancing the hygienic standard of production. - Insulation: Protects the product from external temperatures and minimizes energy loss during heating or cooling processes. This unit serves as the central component of a process line, combining secure storage with active product preparation for subsequent production stages.

Condition: good (used), Year of construction: 2018, operating hours: 4,576 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 4,576 km, This Still electric triplex stacker from 2018 is in good condition; 4,576 operating hours; The capacity is 1,400 kg; The stacker lifts up to a height of 5,016 mm; Overall lowered height 2,165 mm; Equipped with FREELIFT; The 2018 battery features an automatic filling system and external charger; Schedule an appointment for a test drive. Video coming soon. Ijdpfxexp Ncqj Adketg

Condition: used, functionality: fully functional, total height: 6,300 mm, total width: 2,700 mm, tank capacity: 15,000 l, For sale: 4 units of professional Holvrieka Nirota stainless steel process/storage tanks. Intended use: Ideal for the food or chemical industry. Capacity: 15,000 liters (15 m³) each. Dimensions: - Total length: 6.30 m - Cylindrical section length: 3.90 m - Outer diameter: 2.70 m Construction: - Conical bottom with central outlet (ensures complete drainage) - Top-mounted inspection manway Agitators: High-quality drives by JONGIA (Netherlands), type JDR 4/6. Two-speed motors: 4 kW / 1.1 kW (380V). Outdoor-ready, equipped with protective covers. Endress+Hauser Instrumentation: The tanks come equipped with mounted sensors: Ijdpsy Nbfmjfx Adkstg - Hydrostatic level measurement (E+H Deltapilot M, range 0-400 mbar) - Temperature sensor (E+H TR45 with Pt100 probe) - Additional level sensors in a side recess Aluminum working platform. External access ladder with safety cage. Condition: Very good, equipment ready for installation. Please contact us for pricing and further details.

Condition: used, functionality: fully functional, turning diameter: 10,500 mm, rotational speed (max.): 60 rpm, table load: 100,000 kg, table diameter: 5,000 mm, Berthiez JO-9375 5000mm Vertical Boring Mill Single column openside Retractable table 10,500mm maximum turning diameter 5,000mm table diameter Itjdpfx Adey Azhuskeg 100 ton maximum table load 1,250mm height under tool 0.95 – 60 rpm table speed 2,600mm height under cross rail 4 table jaws Rebuilt and CE marked 2008 X traverse lead screws replaced with servo motors and linear scale programmable from Fagor Corzosa programmable readout 93 tons total machine weight

Condition: good (used), mileage: 675,000 km, fuel type: diesel, Year of construction: 2019, Daf XF 530 - 6x2 - Machine Transporter / Low-Loader Truck - 2019 - EURO 6 - 675,000 km - APK 1-27 - Hydraulic ramps - Full air suspension - Lift axle - Steering axle - Automatic gearbox Itsdpfxjyk U H Sj Adkjg

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit Plate heat exchanger | Alfa Laval  Pump unit | Siemens | With motor Control system | Kinco | HMI touchscreen Frequency converter  Iedpfx Adeyyckloketg

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 25,000 liters Diameter: 2,000 mm Length: approx. 8,400 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. Ijdevm Uuwopfx Adketg If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: used, total length: 5,400 mm, total width: 3,000 mm, total height: 3,500 mm, 25,000 L Horizontal insulated tank with powerful horizontal agitator Iedpfjqvpc Hjx Adkjtg External dimensions: Dia Ø 3000 mm H 3500 mm L 5400 mm. Horizontal insulated stainless steel tank - 1 pc. Almond hatch in top. Heavy-duty agitator. CIP and 4" outlet. Year 1995. AISI 304

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 1,320.9 gal Ijdpfx Adjykn Rdjkjtg Internal pressure: 96 PSI Jacket Pressure: 95.9753 Material of Construction: Glass lined steel

Year of construction: 1990, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN7088302, For sale Used Demag single girder overhead crane ± 11,365 mm x 5,000 kg We can optionally supply the cranes including: * adjust in length * Assembly and inspection * conductor rails * radio control Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. * overhead cranes * hanging cranes * jib cranes * KBK installations * boat lifts Itedpfx Adsv Ipr Hekeg All our new and used cranes that we supply (within NL and BE) are supplied including warranty! In addition, we have our own stock of approx. 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. keywords: Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, bruckenkrane, workstation crane, lagerkrane, hebezeuge, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Enke

Condition: excellent (used), Tool holder from the renowned brand WNT, precision-made, G2.5 balancing up to 25,000 rpm – designed for HSC/HPC machining. Clamping diameter Ø5 mm, length 80 mm. Includes a VHM (solid carbide) end mill. Very good condition. Itodpfx Adjw Rruteksg

Condition: good (used), Manufacturer: unknown Motor: Elektromotorenwerke Thurm Motor type: ZG1KMRB71K8 Motor number: 73913 12.1986 Isdpfxorgravs Adkstg Connection: 0,18 kW Speed: 16 rpm Length: 5,000 mm Width: 800 mm Height: approx. 1,000 to 1,200 mm (adjustable) Equipment: mobile Dimensions: 5,200 x 900 x 1,200 mm

Condition: excellent (used), HOLEX SK40 collet chuck for ER collets – robust design, ideal for use on CNC machining centers. • Type SK40 – DIN 69871 • ER collet (diameter Ø16 mm) • Chuck lengths: 70 mm, 100 mm, 110 mm (depending on model) Itjdpsw S Itbsfx Adkog • Max. speed 12,000–15,000 rpm • Torque up to 70 Nm • Balancing class G6.3 – stable operation at high speeds • Brand HOLEX – Hahn+Kolb Germany • Very good, warehouse condition • Available individually or as a larger set

Condition: excellent (used), For sale: Professional GARANT SK40-6-50 tool holder for precise clamping of Ø6 mm tools. Product of the renowned Hoffmann Group / Garant – Germany, used in CNC machining centers. • Clamping type: SK40 (DIN 69871) • Size: Ø6 mm • Length: 50 mm • Catalogue number: 300210.6 • Balancing: G2.5 up to 25,000 rpm • High accuracy, stable clamping • Ideal for VHM end mills and drills as well as precision tools • Very good condition – tested, ready for use. GARANT tool holders represent the top tier in clamping technology – guarantee of quality and durability. -- PRICE PER PIECE -- Itodew Syzwspfx Adkjg

Condition: good (used), Drawbar, drawbar, truck trailer -Max. Load: 55,000 kg -Bearing: 98 mm Iedpfxeb H Rlfj Adketg -Inner dimensions bearing: 882 mm -Drawbar length: 1600 mm -Eye: Ø 49 mm -Drawing with the pictures -Transport dimensions: 1100/1600/H260 mm -Own weight: 86 kg

Condition: good (used), winch, lifting winch, construction winch, anchor winch -mechanical winch -Loading force switchable: 1,250 kg / 5,000 kg -with freewheel and mechanical brake -Drum: Ø 300 mm -Side windows: Ø 600 mm -Drum length: 800 mm -Operation: via hand lever Quantity: 3 pieces available, 1 piece winch with Ø 12 mm rope Price: per piece -Dimensions: 1200/1200/H950 mm -Weight: 684 kg/piece Isdjb A Hpcopfx Adketg