Used Barrel Turner for sale (377)

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: G70303, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Cjdsy Hh Ivjpfx Ad Negt Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 16mm Bed length between centres 1250mm Spindle speeds (16) 25-2000rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. weight 1800Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall 2 axis DRO System 3 Jaw chuck Quick change toolpost and 3-off toolholders Stationary steady Chuck guard Coolant system Rear splashguard

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel Cedpfx Adswcggvo Nsgt • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Condition: used, Hot spraying of the empty bottles from below using nozzles on a 3 metre long cleaning section for pre-rinsing and to reach the filling temperature. Overturning of the bottles at the inlet and outlet of the machine. Equipped with water tank, heater and circulation pump. With dosing connections for water treatment. Additional title: bottle spraying with heatable water tank Codew Tmmpjpfx Ad Nsgt Capacity of filling line: 5000 bo/h Length of cleaning line: 3 m Features: bottle turners; water tank with heater, circulation pump and dosing connections

Year of construction: 2001, condition: used, Crate washer for PETCYCLE plastic crates Csdex T Avnspfx Ad Njgt Additional title: Crate cleaning system Capacity: 2950 crates/h Power: 18 kW Current: 38 A Voltage: 230/400 V Frequency: 50 Hz Length: 7300 mm Width: 1570 mm Height: 1710 mm Weight: 1900 kg Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Running direction: transverse Material: stainless steel Position: free standing Base construction: Self-supporting machine housing in block construction on spherical feet Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner,

Condition: used, Year of construction: 2001, Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner. Additional title: PET bottle ejection system Capacity: 4000 crates/h Power: 2,8 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 1 m³/h Length: 3000 mm Width: 1910 mm Height: 3830 mm Weight: 2500 kg Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Operation / Control: Simatic S7-300 Material: stainless steel Position: free standing Codpfx Aox T Ayyod Njgt Base construction: Stainless steel square tube construction on spherical feet Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Condition: used, Year of construction: 2006, Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner. Additional title: semi-automatic Capacity: 240 cph Power: 0.3 kW Current: 1,85 A Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Csdpfsvcqpijx Ad Njgt Width: 3000 mm Height: 2300 mm Operation / Control: SPS S7-200 Features: Single-point, semi-automatic canner Transport unit washer and turner

Condition: good (used), Year of construction: 2002, functionality: fully functional, High speed moulder infeed with 2 x 5.5 Kw hydro stations Automatic board turner. Single pcs feeding. Cgsdjy It T Tspfx Ad Nst

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Cgjdpfx Adsttxg Io Net Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Cjdpfxewiqukj Ad Nogt Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 275 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: FANUC, controller model: Series 16-T, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This STUDER S30 LEAN PRO features maximum table swivel 8.5 degrees, X-axis travel of 275 mm, and Z-axis travel of 50 mm. If you are looking to get high-quality grinding capabilities, consider the STUDER S30 LEAN PRO machine we have for sale. Contact us for further details. Cgedpfey Hi T Hex Ad Net TECHNICAL SPECS:- Centre height: 175 mm (6.9") - Centre distance: 00 mm (39.4")- Longitudinal slide Max. travel: 50 mm (41.4")- Longitudinal slide Speed (vt): ,000 mm/min (394 ipm)- Longitudinal slide Resolution: mm (.000.004")- Maximum table swivel (Centre distance 00): 8.5 degrees- Wheelhead slide Max. travel: 275 mm (.8")- Wheelhead slide Speed (vt): ,000 mm/min (394 ipm)- Wheelhead slide Resolution: mm (.000.004")- Max. workpiece weight between centres: 130 kg (286 lbs)- Max. load moment (Mmax): 160 Nm (116 ft lbs)- Workhead: Non-swivelling, Roller bearing, AC-Servodrive - Workhead Option: Camlock Adapter - Tailstock Fitting taper: Morse 3 - Tailstock Travel of barrel: 35 mm (1.37")- Control Unit: Fanuc Series 16 (32-Bit processors, ISO and pictogram programming)- Wheelhead Variants: Turret wheelhead U left 400x80 mm Turret wheelhead U left 500x80 mm Grinding wheel right 400x40 mm Grinding wheel right 250x25 mm- Internal grinding attachment: For belt driven spindles Ø0 mm - Max. grinding length (Ls): SPW + b - 80 mm - Max. diameter with three-jaw chuck (ØF): 129 mm - Max. diameter with closed steady (ØL): 140 mmHours: 47.550Condition: Well maintained

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition Cgjdpfjya Eldex Ad Nst • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: excellent (used), Year of construction: 2014, For sale: Screw and barrel for Engel 750 injection unit. Screw Diam. 60 mm Codjiw Dt Djpfx Ad Negt

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Compost Turner BACKHUS 10.10. Diesel engine: 264 hp Cjdsy Equ Hspfx Ad Negt Weight: 14.9 t Current videos can be provided upon request.

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Cgjdpevvi Tyjfx Ad Not Storage location: Customer

Condition: new, Year of construction: 2026, machine/vehicle number: ST-80, functionality: fully functional, pressing force: 80 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 5 mm/s, table width: 1,000 mm, table length: 1,750 mm, table height: 800 mm, total length: 2,000 mm, total width: 1,750 mm, total height: 1,750 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Model: ST-80 STANDARD DESCRIPTION: We have designed the ST series of motorized hydraulic presses with a movable gantry and adjustable ram, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures, as well as plates cut by oxy-fuel or laser. The design facilitates easy loading and unloading of large volumes: parts, plates, or structures. It provides access to various pressure points without having to reposition the workpiece, thanks to the lateral movement of the cylinder and the longitudinal travel of the gantry. STRUCTURE AND TABLES: The ST series hydraulic presses feature an electro-welded frame manufactured exclusively from S355JR steel. The frame is stress-relieved and precision-machined after welding to ensure perfect parallelism and accuracy. All structural calculations and design are performed using finite element software. As a result, we always guarantee our high standards of precision and quality. The gantry provides longitudinal movement. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with honed barrel, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder operation via a lever hydraulic valve. Equipped with a removable pressure pad to protect the piston. Motorized hydraulic unit with two speeds and automatic switch-off of the fast approach speed at working pressure, including a pressure relief valve. ELECTRICAL SYSTEM AND SAFETY: Electrical circuit includes a motor protection switch with emergency stop. Supplied with a glycerin-filled pressure gauge (reading in tons) and hydraulic oil. Complies with all essential health and safety requirements according to CE standards. Delivered with an operating manual. MODEL ST-80 Capacity (t) 80 Motor Power (kW) 3 Working Speed (mm/s) 3.8 Approach Speed (mm/s) -- Return Speed (mm/s) 4.7 Max. Pressure (bar) 315 Piston Stroke – J (mm) 450 Lower Table (mm) 1,000 x 1,750 Ram Travel – C (mm) 730 Cgodpfx Asy E Iq Ued Njt Gantry Travel – D (mm) 1,100 Front Opening – A (mm) 1,050 Vertical Opening – B (mm) 500 Working Height – E (mm) 800 Overall Width – G (mm) 2,000 Overall Depth – H (mm) 1,750 Overall Height – I (mm) 2,250 Weight (kg) 1,700

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s Cgedpoydnp Hsfx Ad Nst

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Cgjdpfxsycuuys Ad Not Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 2026, condition: used, functionality: fully functional, Complete brewery equipment, can and bottle filling machine, pasteurizer, manual depalletizer, can rinser and turner. The equipment is located in the Faroe Islands. Cgodpsy Atr Ssfx Ad Njt

Condition: excellent (used), HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Cgsdsxphnlspfx Ad Not Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C Csdpfx Ajy A H Umod Nsgt • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2012C4-127-6/1, total height: 2,800 mm, load capacity: 160 kg, construction height: 2,800 mm, year of last overhaul: 2026, total width: 1,450 mm, total length: 1,800 mm, lifting height: 2,000 mm, input voltage: 400 V, Bowl lifter/elevator: Logiudice brand, model: SR01-160, year of manufacture: July 2012, serial number: 2012C4-127-6/1. The equipment is in very good optical and technical condition, and works flawlessly Maximum working width: 2,000 mm Installed electrical power/power supply: 1.5 kW; 400 V, 50 Hz, 3 phases, 3.44 A; Steel structure varnished metallic gray RAL 9007; Bowl lifter/turner with discharge on the left side; Electromechanical control panel; Discharge height: 2,000 mm Dough capacity in bowl: 15 to 160 kg Flour capacity in bowl: 6 to 100 kg bowl volume: 250 L Lifting-lowering system: hydraulic with cylinder, hydraulic system with Marelli Motori engine, and Hydroven hydraulic tank, model 2144LQ, maximum pressure generated of 40 bars Tank weight: approx. 880 kg Overall dimension L 1,800 mm x W 1,450 mm x H 2,800 mm Transport dimension: L 1,800 mm x W 1,450 mm x H 2,000 mm Maximum vat tipping point 2,900 mm Automated work cycle; This vat lift is suitable for industrial use and offers solutions for any type of lifting. It has a very resistant steel structure; a hydraulic lifting system with a chain for small or large dough capacities. The equipment can be adapted for any model or type of vat trolley/bowls. For Romanian companies, there is the possibility of selling in installments, 50% down payment, and monthly installments with interest of 1%/year in Euros. Price Euro 12.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Cgedpfxey Hmaqj Ad Njt Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 Cgedpfx Aoyc Rtxjd Nst - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) Cgedpfx Asyc R U Aod Net - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH Cedpfxsxm Rwqj Ad Nsgt BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: ready for operation (used), Year of construction: 2022, clamping force: 300 kN, screw diameter: 22 mm, overall weight: 2,000 kg, controller manufacturer: FANUC, This FANUC Roboshot alpha-i30B was manufactured in 2023. It features a clamping force of 300 KN, a screw diameter of 22 mm, and a maximum injection speed of 600 mm/s. Ideal for precision in electrical injection moulding, it offers a compact platen size of 440x420 mm and efficient energy consumption. If you are looking to get high-quality moulding capabilities, consider the FANUC Roboshot alpha-i30B machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine has an estimated 100000 cycles and was only used for prototype production of tpe. Technical Machine Benefits • Max. Injection volume: 29 cm³ Cjdpfx Aex D E A Nod Nsgt • Injection stroke: 75 mm • Max. Injection speed: 600 mm/s • Max. Injection rate: 228 cm³/s • Number of heater zones (barrel): 3 • Number of pyrometers (nozzle): 1 • Total heater wattage: 3. 8 kw Extra Information Machine still under power / Fl net option for Fanuc Robot/ Ethernet IP option for Fanuc Robot/ Fanuc Robot control integration into Roboshot