Used Barrel Turner for sale (373)

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 heating zones in the barrel + 2 heating zones in the die head, designed for universal use with a nitrided plasticizing system. Dcjdpsxtf Hgefx Ad Njg - Plasticizing unit fi 25 mm, nitrided - Barrier screw with mixing tip (for hard PVC) - Output torque on screw 636 Nm - maximum screw speed 80 rpm - Screw start interlock to prevent underheating - Barrel equipped with feed zone cooling (liquid cooled) - 3 barrel temperature control zones - Heating-cooling set (band heaters, cooling fan) - Lenze gearmotor with 5.5 kW motor - hopper - Stepless speed control via potentiometer and inverter - Temperature control with Omron controllers for full monitoring - Heater current measurement - heater burnout protection - PID heating tuning function - type J thermocouples - Die head with 2 heating zones, no cooling

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 2812, input voltage: 420 V, total length: 5,890 mm, total width: 1,000 mm, total height: 1,930 mm, compressed air connection: 6 bar, type of input current: three-phase, power: 8.5 kW (11.56 HP), GPE/24 machine for printing oc cylindrical objects like little tubes, barrels and round pens. Dodpfjyq Nmmjx Ad Njcg Loading hopper, to provide the filling the chain transport system. Chain transport system with V shaped links to hold the product with diameter up to 14/20 mm and parallel transport chaine may be adjusted a maximum lenght of 140 mm. System that controls the rotation of product. One colour printing - no registration. Or with register system for the pens with clip. Drying tunnel 140 cm long with warm air blower. After drying are the final cooling fan.

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Dsdpfoyyz Ddex Ad Nocg Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, opening stroke: 2,100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Mounting platen (h x v): 1,600 x 1,550 mm Clear daylight (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Min./max. mold installation height: 500 / 1,100 mm Max. mold weight: 12,200 kg Max. opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/back: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirements (approx.): 11.00 x 3.00 x 2.60 m Dedpfx Adsyv Acms Njcg Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating power: 53 kW Barrel heating control zones: 7 Oil fill volume: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillating elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving side 2 x hydraulic core pulls on fixed side 20 x hot runner controllers Robot interface as per Euromap 67

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm Dcjdsywxrajpfx Ad Nsg • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Dsdpfoq R Tkwjx Ad Nocg Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. Djdpfx Adoby Rfpo Necg We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Dcedeiv H Ekjpfx Ad Nsg This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2676, warranty duration: 6 months, year of last overhaul: 2024, Our refurbished SIMA 220 from PALAMIDES collects, counts, sorts, checks and packs your bulk mailings cost-effectively and reliably. At a speed of up to 28,000 items per hour, letters are transferred directly from an upstream inserting or addressing machine and deposited fully automatically into letter containers in accordance with postal regulations. The letter containers are automatically taken from a magazine, which can be preloaded with around 10 containers. Save money with every operating hour Mail processing machines could often run faster if manual picking and sorting into letter containers were smoother and faster. With the SIMA 220, you have the opportunity to significantly speed up the entire processing and thus achieve a higher level of operational efficiency. Flexibly combined with any pre-machine The SIMA 220 can be quickly and easily adjusted to the height of your pre-machine and, in the event of a malfunction, the entire line can be stopped via a corresponding signal exchange. The integrated belt turner also ensures that letters from different pre-machines can be transferred and deposited in the letter container in accordance with postal regulations. Only the good ones get through Incidentally, the SIMA 220 also checks every single letter for the correct format and specifically rejects any that do not comply. This ensures that no incorrectly addressed envelopes or the like go through the post. Top quality at an affordable price Dsdpfx Ast A A Tped Nscg The CUPASO price-performance promise also applies to this SIMA 220. Just because you choose a used machine does not mean you have to compromise on quality and reliability. Used machines refurbished by CUPASO are the only ones that come with a warranty. That's our promise to you Our full 6-month warranty promise also applies to this SIMA 220, of course. That means you're on the safe side. If anything breaks during this period, we will replace the defective part and install it at our expense (except for wear and tear, machine control and travel costs). Product size: DIN C6 - long Speed: 28,000 pcs/h Year of manufacture: 2013 Machine number: 2676 Condition: Workshop refurbished with warranty Warranty period: 6 months Machine location: CUPASO Showroom, DE-38110 Braunschweig Equipment: • Belt turner • Alignment section • 2 x defective product ejection • Total product counter and counter per container • Programme control via touchscreen • Magazine for approx. 10 DPAG letter containers • Display for four filled letter containers • Height adjustment of the machine • Mobile machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, laser type: fiber laser, laser power: 6,000 W, Completely new resonator in 2025 with 6,000 watts + new laser cutting head (investment approx. €190,000) Immediately available Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet format: Max size, 4,000 x 2,000 mm Operating hours: Post-upgrade in 2025: approx. 1,400 h operating hours, approx. 550 h cutting hours Pre-upgrade until 2025: approx. 17,700 h operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyor in the cutting area - Dust extraction system with 200 l barrel adaptation - Upgrade in 2025: 6,000 watt fiber laser with new cutting head Standard Equipment: Dedpfxoywlcxo Ad Nscg BySprint Fiber 4020; Fiber 4000 Pallet changer system with 2 shuttle tables Fully enclosed cover/roof Scrap trolley with rollers CNC control unit and cabinet Touchscreen with ByVision operating interface Operation and comfort features Maintenance Messenger Restart Manager System Manager Handheld control unit ByHand Cutting parameters assistant Uninterruptible power supply (UPS) Cutting bridge OPC Interface Cutting Cutting head Piercing jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heating Tropicalization Interface for automation/handling Chiller Operator safety in cutting area Operator safety in loading/unloading area Voltage: 400V / 50Hz Compressed air (machine incl. laser source and chiller) Material specification Part tolerances and cut surface quality Cutting gas supply and cutting quality TECHNICAL DATA: Max. positioning speed X/Y axis parallel: 100 m/min Max. simultaneous positioning speed: 140 m/min Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Max. workpiece weight: 1,580 kg Table change time: 35 seconds Laser power: 6,000 watts Max. sheet thickness: Steel: 30 mm Stainless steel: 25 mm Aluminium: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, chiller): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height This used machine can be inspected under production conditions. All information provided without liability – sale is made under exclusion of any guarantees or warranties. Prior sale reserved.

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: Djdpfxoyw Aa Uo Ad Necg - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Dcedpjw E Ei Uofx Ad Nog Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. The ideal machine for processing large logs. Dcsdpfxjxp Hzdj Ad Njg Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution Dcsdpfx Aswmm H Rsd Neg   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Dcedpfx Adjnxi H Us Neg Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 Dcsdpfxst Ei Hus Ad Nog 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: excellent (used), Year of construction: 1998, operating hours: 1,830 h, functionality: fully functional, Schroeder solid parquet production line. Has only operated for 1,830 hours. Fully functional, working speed 30 m/min. The line consists of: feeder, Planer I, transfer, Planer II, transfer/turner, tenoner. Dimensions of processed elements: width 45-100 mm, thickness: 10-23 mm, length: 250-1200 mm. Dsdpfxoywkdze Ad Njcg

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm Dsdpfx Adep E Egls Necg backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm Dodpfxep E Ed Ro Ad Necg roll core for rolling rings: 190 mm

Condition: ready for operation (used), Year of construction: 2024, clamping force: 3,500 kN, screw diameter: 50 mm, injection weight: 437 g, total width: 2,210 mm, total height: 2,050 mm, overall weight: 18,500 kg, product length (max.): 8,000 mm, Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine. • Injection Unit (1550) • Screw L/D ratio: 20 • Theoretical injection volume: 480 cm³ • Injection speed: 300 mm/s • Injection rate: 588 cm³/s • Maximum pressure on material: 2100 bar • Holding pressure: 1100 bar • Screw torque: 900 Nm • Screw speed: 250 rpm • Plasticising capacity (PS): 56 g/s • Barrel heating zones: 5 • Heating capacity: 36 kW • Nozzle contact force: 50 kN • Clamping Unit • Locking force: 3850 kN • Max. mould opening stroke: 695 mm • Min–Max mould height: 350–800 mm Dcsdjytgbyspfx Ad Njg • Platen size: 1110 × 1200 mm • Tie bar spacing: 820 × 820 mm • Ejector force: 70 kN • Ejector stroke: 200 mm • Power • Total installed power: 216 kW

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation Dedpfx Ajyt Ikved Njcg • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Year of construction: 2018, condition: used, construction height: 2,000 mm, bed width: 2,700 mm, Equipment: CE marking, We are offering this used "Marican" L250E3 two-vessel brewhouse with fermentation tanks, year of manufacture 2018. The brew kettle capacity is 250 liters per batch. The system consists of a mash tun with integrated false bottom and a wort kettle with integrated whirlpool. Additionally, a hot liquor tank for sparge water is included. For cooling, a plate heat exchanger is installed. There are also 3 open, non-refrigerated fermentation vessels, as well as all hoses and a pump for cold wort transfer. The brewery is equipped with a 32-amp three-phase power connector. A fixed water connection is not required. If interested, a "Sommer" Maltman 55 grist mill, a barrel washer, a manual counter-pressure filler, and a capper are also available. Stainless steel kegs in various sizes can be purchased as well. The system was in regular operation until 2025. Machine type: L250E3 Dcodpfxjyt Nlno Ad Nsg Model number: 551 Year of manufacture: 2018 Wiring diagram number: MAB-118 If you have any questions, please feel free to contact us at any time.

Condition: used, Year of construction: 2008, We are offering this used STORTI GSI / 170-TA9 pallet production machine, year of manufacture 2008. Complete line includes: Block-making unit 2 nailing machines Djdpfx Adjyvggzo Njcg Turners Brand marking (burning) Corner cutting Stacker Fully operational, was in use until recently. If you have any questions or need further information, please contact us by message or phone.

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Dedsub S R Hjpfx Ad Njcg Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm Djdjx D Ewmspfx Ad Necg • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power