Used Baykal Aphs 31200 for sale (326)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment Fgsdpfowypp Ijx Ad Nsb - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: excellent (used), Year of construction: 1992, Arpeco Impressionist 420mm web width unwind with roll lift and pneumatic 3” mandrel Fgjdpferrvzrex Ad Neb splice table web guide Sherman corona treater 7 x print units 7 x double UV dryers 7 x chill rolls all UV lamps are BRAND NEW ! 1 x 9.5kW chiller IR dryer Hot Air end of press double size chill roll 2 x rewind mandrels pneumatic 3” many print cylinders and anilox rollers

Condition: excellent (used), Year of construction: 2004, Gallus EMS 410, 2004 Unwind unit E L electronic web guide Arcotec Corona Treatment unit 7 servo-driven flexo print stations 7 IST UV dryers 7 servo-driven water-cooled chill rolls rail system delam/relam rotary die station with K&B Gapmaster Matrix rewind Magnetic die crane und hoist Fedpfev E Rizjx Ad Nogb BST video control Sensotec automatic register control Exit die with nip Rewind touch screen control panel 21 anilox rollers 9 magnetic cylinders 84 print sleeves Tooling: 12x7 Printing cylinders: 89; 96; 102; 104; 106; 108; 116; 117; 121; 168; 9x Magnetic Cylinders: 89; 96; 102; 104; 108; 112; 116; 117; 120. 1x rubber roller for varnishing. 21x Anilox rollers Good working condition In production, can be inspected at any time

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm • Unwinder: max. roll diameter approx. 800–1000 mm • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials Fjdpfxey A Nhij Ad Nogb The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs.

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request Fgjdpfx Aeyalqyjd Njb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine MALBATE Mecaformat 270. - 5 colour units + 1 varnish unit + rotary magnetic die station. - UV drying – 6 drying units - Average electrical consumption ~35 kW - Compressed air: 7/8 bar - Maximum web width: 270 mm - Minimum web width: 150 mm - Maximum feed length: 220 mm - Minimum feed length: 50 mm - Maximum print width: 260 mm - Maximum print length: 305 mm - Maximum semi-rotary die cutting length: 220 mm - Maximum unwind roll length: 3,000 m - Unwind roll diameter: 800 mm - Waste rewind roll diameter: 450 mm - Finished roll diameter on shaft: 360 mm - Maximum speed: 10,000 imp/h The machine is currently in production. Appointments can be scheduled for inspection. Fedoyr R Sgopfx Ad Njgb Please refer to the PDF file for further details. For additional information, we are at your disposal.

Condition: good (used), NILPETER FA 3300 Manufacturer: Nilpeter Model: FA-3300 Fjdpfx Adsyz T Eie Nogb Year: 2002 Web Width: 330 mm Printing Units: 6 UV flexo units Drying System: • UV drying for all printing units • 3 hot air dryers for water-based inks _____ Configuration & Equipment • Double rotary die-cutting station • Turn bar (web inversion system) • Cardan shaft for reverse side printing/cutting • Slitting unit with longitudinal knives • 100% inspection system: BST TubeScan _____ Additional Equipment • ABG Vectra rewinding system (Year 2002)

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology Fgedpfx Adsyz Adns Nsb High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: good (used), Year of construction: 2018, KONICA MINOLTA ACCURIOLABEL 190 Year of Manufacture: 2018 _____ Machine Specifications and Equipment:  Total Print Count: ONLY 0.4 million  Web width: 330 mm  Print Speed: Up to 60 ppm  Resolution: 1200 x 1200 dpi  Paper Formats: A6 - SRA3, custom sizes  Duplex Printing: Yes  Connectivity: USB, Ethernet  Toner System: Simitri HD polymerized toner  All spare parts replaced by KONICA MINOLTA GERMANY – like new. Fgodpfxsyz Ac Ds Ad Nsb

Condition: used, Year of construction: 2020, functionality: fully functional, We are offering this used EMproject89 MS 1700 TWOCOL, year of manufacture 2020. Machine type: MS 1700 TWOCOL Serial number: 24/2020 Year of manufacture: 11/2020 Voltage: 220 V Rated power: 1.5 kW Suitable for flexographic printing, carton printing, corrugated board, and packaging. If you have any questions or require further information, please feel free to send us a message or call us. Fgedpeyz T H Hefx Ad Nob

Year of construction: 1997, condition: good (used), Maximum material width: 410 mm Jumbo roll diameter max: 1000 mm Maximum print width: 405 mm Maximum print length: 609.6 mm Maximum die-cutting width: 405 mm Minimum die-cutting length: 254 mm Maximum die-cutting length: 609.6 mm Die waste rewinder diameter max: 800 mm Maximum printing speed: 100 m/min Fedpfx Aewxpubsd Nogb 8 flexographic printing units without corona treatment 1 single-sided web cleaner 8 UV dryers 2 die-cutting units, Gapmaster with extensive accessories Machine is in production

Condition: excellent (used), functionality: fully functional, Working dimensions mm 290×185 Vertical stroke mm 200 Table rotation 0-90° Vice capacity mm 170×135 Spindle speed rpm 2800-12000 Power kW 1.1 Fedpfx Aoy Awklod Nogb Voltage V 230-400 ±5% Pressure bar 7

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 400 h, product width (max.): 450 mm, working width: 450 mm, Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 8 UV cassettes 2x hot air drying Printing speed max 150 m/min Feed printing unit +/- 4 mm Punching width 450 mm Punching length from 304.8 mm to 609.6 mm Rewind diameter D 800 mm Fgedpfx Adeqa Ax No Neb Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Accessories: 16 impression cylinders 8 anilox cylinders 1 die-cutting cylinder 1 IEEC corona treatment (one-sided) 1 Meech web cleaning unit (double-sided) 2 punching units optional 1 turning cross 1 Delam/Relam 1 Coldfoil unwinder 8 LED cassette dryer GEW We would be happy to make you an offer.

Condition: used, Year of construction: 2008, functionality: fully functional, Material: min 12 microns and up to 250 g/m2 Width: 430 mm Mechanical speed max:200 m/min Printing repeat: from 304.8 mm to 635 mm (12" to 25") Fodpfov Ah S Ujx Ad Nsgb Double side tape: 0.38 mm Flexographic plate thickness: 1.14 mm

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner Fedsv Tzhqepfx Ad Negb •

Condition: good (used), Year of construction: 2016, OMET X6 Year of manufacture: 2016 Web width: 430 mm Condition: Very good – well maintained, in production Availability: End of 2026 Location: Europe Technical Configuration – 6 x Flexo printing units (servo-driven, sleeve system) – Printing on self-adhesive materials – 6 x UV curing lamps – Extended varnishing on last printing unit Fedpfsyyn U Ajx Ad Nsgb – Turn bar (web turning device) – 2 x Die-cutting units – 1 x GapMaster system – 3 x Sheet-off die-cutting stations with delivery belt – Sheet delivery with evacuation conveyor Equipment – 3 x Sleeve sets – 6 x Anilox rollers – 3 x Magnetic cylinders Application and Advantages The OMET X6 is a high-performance flexographic press combining state-of-the-art servo technology with the flexibility of sleeve systems. It offers: – Fast job changes with minimal downtime – High register accuracy and consistent print quality – Versatility for both roll-to-roll and sheeted label production – Efficient inline finishing capabilities (die-cutting, varnishing, sheeting) – Ideal for medium to long runs and frequent job changes General Condition The machine is in very good condition, professionally maintained, and currently in operation. Inspection and test runs can be arranged at any time by appointment.

Condition: good (used), Year of construction: 2008, OMET Year of manufacture: 2008 Printing process: UV flexo Condition: Used – very good condition (single owner) Location: Italy _____ Machine Configuration • 8 x UV flexo printing units • UV curing system • 2 x die-cutting stations • 1 x Gap Master system • 1 x additional die-cutting unit for sheet-off • Sheet delivery with evacuation conveyor • Turn bar (web turner) Fgodpfxjyyn Sne Ad Nob • 3 x corona treatment units • Chilled impression cylinders with integrated chiller • Suitable for adhesive label printing _____ Equipment & Tooling • 3 sets of tooling • 10 anilox rollers • 3 magnetic cylinders _____ Technical Highlights & Advantages This OMET Flexy 330 offers a robust and versatile configuration, ideal for a wide range of label applications. Key advantages: • 8-color configuration for high flexibility • Corona treatment for improved ink adhesion • Chilled impression cylinders for consistent print quality • Well-maintained machine from single owner • Currently in production – inspection and testing possible This machine represents a cost-effective solution for converters seeking a flexible and efficient printing line. _____

Condition: good (used), Year of construction: 2010, functionality: fully functional, OMET FlexyServo 330 mm Year of manufacture: 2010 Printing process: Servo-driven UV flexo Condition: Used – excellent condition Location: Europe _____ Machine Configuration • 6 x UV flexo printing units • 6 x GEW UV drying units • Double die-cutting stations • 1 x Gap Master system • Turn bar (web turner) • Sheet-off unit with additional die-cutting station • Suitable for adhesive label production _____ Equipment & Tooling • 6 sets of tooling • 6 anilox rollers • 3 magnetic cylinders (currently in production) _____ Technical Highlights & Advantages This OMET FlexyServo is a modern servo-driven flexo press offering excellent register accuracy and efficient production performance. Key advantages: • Servo technology for high precision and reduced waste Fjdeyyn Rwopfx Ad Nsgb • Strong UV drying system (GEW) • Flexible configuration with multiple die-cutting options • Well-maintained machine in excellent condition • Immediate availability with testing possible This machine is ideal for converters looking for a reliable and efficient narrow web solution. _____

Condition: good (used), Year of construction: 2002, OMET Varyflex 520 Year of manufacture: 2002 Web width: 520 mm Printing process: Servo-driven flexo (sleeve technology) Condition: Used – good working condition Location: Europe _____ Machine Configuration • 8 x flexo printing units (servo-driven, sleeve system) • Drying system: 7 x UV LED + 1 x conventional UV • Water-based ink compatible • 2 x die-cutting stations • 1 x additional die-cutting unit for sheet-off system • Sheet delivery with evacuation conveyor • Cold foil unit • In-line slitting system (scissor type) • Double rewinder (dual shaft) • Web inspection camera system • Chilled impression drums • Integrated chiller unit • Ink preheating system _____ Equipment & Tooling • 5 sets of sleeves • 12 anilox rollers • 5 magnetic cylinders _____ Technical Highlights & Advantages Fgjdpfoyyn Ipjx Ad Nsb This OMET Varyflex 520 offers a very flexible configuration, making it suitable for a wide range of label applications.

Condition: like new (used), Year of construction: 2011, OMET Varyflex VF1 Year of manufacture: 2011 Web width: 850 mm Printing process: Flexo + Rotogravure combination line Condition: Used – very good condition Location: Europe _____ Machine Configuration • 8 x UV flexo printing units (equipped with new UV lamps, LED-ready) • All flexo units in ATEX execution (suitable for solvent-based inks) • 1 x rotogravure unit (compatible with solvent- and water-based inks) • 1 x die-cutting unit (530 mm) • In-line slitting system • Double turret rewinder • Turn bar (web turning system) • Hot air dryer on first printing unit • Cold seal trolley (movable) • Cold foil unit (cassette type, positionable on any unit) _____ Equipment & Tooling • Extensive anilox roller package • Sleeve system (well maintained) • Tooling in very good condition Optional (available upon request): • Omet plate mounter • Bimec slitter rewinder 1200 mm (almost new condition) _____ Technical Highlights & Advantages The OMET Varyflex VF1 is a highly versatile production platform designed for both label and flexible packaging applications. Key advantages: • Wide web format (850 mm) – ideal for high-volume production Fsdpfxsyyn Hfo Ad Negb • Hybrid configuration (flexo + rotogravure) for maximum flexibility • ATEX design allows use of solvent-based inks • LED-ready UV system for future energy efficiency upgrades • Modular configuration with movable units (cold foil/cold seal) • Excellent condition with recently updated electronics (PLC, drives, control cabinets) • Proven application: previously used for polyethylene-coated materials (80–90 g/m²), ensuring reliability in demanding environments This machine offers an outstanding balance between performance and flexibility.

Condition: used, Year of construction: 2017, Printing width:1270 mm Fedpfxsyybwdo Ad Nsgb Web width: 1320 mm Print repeat (max): 850 mm Print repeat (min): 350 mm Plate cylinder diameter: 105 – 158 mm Maximum mechanical speed: 500 m/min Suitable inks: • Solvent-based inks • Water-based inks Turret unwinder and rewinder Maximum roll diameter: 1000 mm Minimum roll diameter: 300 – 350 mm Automatic splicing system Drying system:Gas Inking System • Magnetic doctor blade chamber • Ink supply system with automatic cleaning • In-line vibration viscometers • Integrated ink temperature control system Web Handling • Web guiding system before printing • Web guiding system before rewinding • AHLBRANDT corona treatment system • Anti-static system Inspection & Control • Double linear camera system for 100% print inspection • Automatic print pressure and register control • Markless register control system based on full-width camera • PDF comparison system with automatic register correction

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Fjdpfx Asyf E Tfed Nogb Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: good (used), machine/vehicle number: 16526, pattern table size: 320 x 440 mm working table size: 200 x 300 mm working area longitudinal: 250 mm working area cross: 220 mm spindle turning speed range: 1460 - 8550 rpm milling proportion: bei 1 : 1 ca. 105 x 165 mm spindle drive: 0,86 kW Fgsdpfxedlkwge Ad Neb space needed: 1000 x 900 x 1320 mm weight: 360 kg

Year of construction: 2023, condition: used, best of: automatic sample feeder Autosampler 7693A, 5977C GC/Insert Plus MSD Turbo EI/CI package, 8890 GC System Mainframe MS Ready S/SL, AIS tower, serial no. CN23285160, diaphragm vacuum pump, make Pfeiffer, serial no. 109120905, vacuum pump Duo Line, make Pfeiffer, serial no. 22139727, gas lines / valves, serial no. MY2328V093 Fjdpfxjyvgqwe Ad Nsgb

Year of construction: 2022, condition: used, functionality: fully functional, Selling a liquid chromatograph, SCIEX Triple Quad 6500+ with Shimadzu LC-40Dx3. Fedoyw Nf Depfx Ad Njgb Complete, well-maintained set; the instrument has not been fully utilized. Can be inspected in the laboratory. You are welcome to visit. Dismantling and transport are the responsibility of the buyer.