Used Baykal Aphs 31200 for sale (340)

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. Todjzqhgdepfx Ahmoc The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Tjdpfxjxrdb Ho Ahmoc Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Tedpfx Ahsza Synemjc Manufacturer / Model: Siat L36 150 TC CE Year of manufacture: 2014 Condition: used, good Function: functional Application: printing adhesive tape CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request.

Condition: new, Year of construction: 2027, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, FLEXOR CI6-1000 — 6-Color CI Flexographic Printing Press, 1000 mm The FLEXOR CI6-1000 is a six-color central impression flexographic printing press for roll-to-roll packaging production. Offered by Gutenberg Grafische Machines B.V., the machine combines a 1000 mm maximum printing width with servo unwinding and rewinding, motorized registration, PLC control and video inspection. TECHNICAL SPECIFICATIONS Printing stations: 6 colors Maximum printing width: 1000 mm Maximum web width: 1050 mm Printing repeat: 350–900 mm Printing speed: 50–200 m/min, depending on job conditions Maximum mechanical speed: 250 m/min Register precision: ±0.15 mm longitudinal / ±0.15 mm transverse Central impression drum: Ø1200 mm, servo-driven Maximum unwind / rewind roll diameter: Ø800 mm / Ø800 mm Roll-core inner diameter: 76 mm, with 3-inch air shafts Plate thickness + mounting tape: 1.7 mm + 0.38 mm, or as specified Ink: Water-based or solvent-based Electrical supply: 3-phase, 380 V, 50 Hz, or as specified Effective printing speed depends on substrate, printing repeat, inks, required print quality and solvent-retention requirements. Maximum mechanical speed is not the production printing-speed rating. CENTRAL IMPRESSION PRINTING SYSTEM Six laser-engraved ceramic anilox rollers and six chamber doctor blade systems with pneumatic ink pumps. Anilox line counts are selected for the printing requirements. The printing section features a 100 mm cast-iron frame, hydraulic positioning and retraction of the printing cylinders, mechanical printing-pressure adjustment, and automatic ink mixing when stopped. The central drum incorporates constant-temperature water cooling. WEB HANDLING AND ROLL CONTROL Single-station, center-driven servo unwind and rewind with low-friction-cylinder tension control. Equipment includes EPC web guiding before printing, curved anti-wrinkle rollers, a web-break stop sensor at the unwind and automatic tension hold when the machine stops. An overhead lifting arrangement is specified for handling materials, cylinders and rollers. CONTROLS AND PRINT INSPECTION PLC-controlled motorized longitudinal and transverse registration with automatic center return. ER video inspection is included for viewing the printed web during operation. DRYING AND COOLING Tedoz Ia Hnepfx Ahmec Five inter-color drying modules, centralized electric hot-air drying and post-print cooling before rewinding. The drying system includes independent inlet and exhaust fans, adjustable airflow and PID temperature control with a stated accuracy of ±2°C. SUBSTRATES The specified thin-film range covers shrink film, BOPP, PET, PE and nylon at 15–150 µm. The wider material list includes LDPE, LLDPE, HDPE, CPP, paper, non-woven materials, laminates and aluminium foil. Suitability for each material grade, thickness and ink system is confirmed against the intended application and samples. Corona treatment unit for surface preparation before printing. Ultrasonic anilox cleaning machine. Camera-assisted flexographic plate mounting machine. Turn bar for the agreed double-sided printing arrangement. The four auxiliary systems are included in the Gutenberg package. Final equipment specifications follow the agreed quotation. REQUEST AN OFFER Send your substrate type and thickness, web width, required printing width, printing repeat, artwork, ink type, to confirm the proposed configuration for your production requirements.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS Tsdpfxsz Ea I Ts Ahmoc The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: new, Die block, 80 x 80 mm with V-grooves approx. 86°, length 2500 mm Tedjzqgzmepfx Ahmoc

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Tedoz Ea Itepfx Ahmec Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 12J10E, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: 12J10E, year of manufacture: 2010, maximum air pressure: 8.5 bar; MFR: 568 L/min; as good as new condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Constructed of Stainless Steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Tjdjzz Twcspfx Ahmec Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price: 6.160 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. Wir sprechen Deutsch/Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Todpszv Ibfofx Ahmjc Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Able to handle solid particles up to 500 microns (0,5 mm) It has a crack in the back left mounting foot (see picture)

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing Tsdpfez Ea N Rjx Ahmsc The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Tsdez Abcpopfx Ahmoc Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 1994, LEMOFLEX INLINE PRINT Todpfx Ahjzk U N Esmsc Year of production: 1994 web material 1200 mm web width 1000 mm Speed 150m/min 4+0, 2+2,3+1

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, product width (max.): 330 mm, working width: 330 mm, „Technically audited by Focus Machinery expert on June 5th, 2026 – 100% ready for production" 8 colour UV-Flexoprinting machine: Model eFlex 330-2 S Todpfx Aorxrx Sshmec

Condition: good (used), Year of construction: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel work tables • Side tables • Waste/trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal/conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The owner states that the unloading unit is approximately 10 years older than the main cutting machine. Jogging Table The owner states that the Baumann jogging equipment is approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial need for additional cutting tools and provides spare knife capacity for ongoing production. Todpoz Ei D Djfx Ahmoc _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for its robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organization. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Condition: used, Year of construction: 2008, machine/vehicle number: 1277, product width (max.): 670 mm, working width: 670 mm, type of input current: three-phase, Label flexo printing machines OMET Varyflex Year 2008 - POLAND Number of colors: 8 Drying system: UV GEV Printing width: 670 mm Flexographic printing repeat (min): 12” Flexographic printing repeat (max): 33” Maximum unwind diameter: 1000 mm Maximum rewind diameter: 1000 mm Drying units: 8x UV, 5x hot air Mechanical speed: 200 m/min 76.2 mm – 3” shafts BST web guide Corona Vetaphone Video BST Availability: Immediate Operational status: In production Sleeves (8 pcs of each size – one sleeve for each of the 8 printing units): 14” 8/48 359.833 mm 14” 16/48 364.067 mm 15” 3/8 390.525 mm 16” 4/8 419.1 mm Tjdpfx Ahjziz Huemsc 18” 4/8 457.2 mm 19” 4/8 495.3 mm 19” 13/16 503.238 mm 22” 5/8 574.675 mm 24” 13/16 630.238 mm 27” 4/8 698.5 mm 29” 6/8 755.65 mm 32” 3/8 822.325 mm Anilox rolls: 500/4 – 2 pcs 500/3.8 – 1 pc 500/3.5 – 2 pcs 500/3 – 2 pcs 500/2.5 – 2 pcs 470/3.1 – 1 pc 400/5 – 2 pcs 400/4.5 – 2 pcs 380/5.5 – 1 pc 340/6 – 1 pc 320/5.5 – 3 pcs 320/7 – 1 pc 280/6 – 2 pcs 280/8 – 1 pc 180/12 – 2 pcs 140/8 – 1 pc 120/10 – 1 pc 100/14 – 1 pc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. Tedpfozizp Ajx Ahmec The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, color: blue, operation weight: 53 kg, Year of construction: 2026, Equipment: UVV, Caffini Libellula 1-3 Diaphragm Pump – NEW | Equivalent to Wacker Neuson PDI 3A & AMT 337G-96B | Delivery head 7 m | Flow rate 333 l/min | Discharge port 80 mm | Honda GX 160 petrol engine | Weight 53.5 kg | Solids handling up to 6 cm | Includes chassis & accessories Technical Data: Manufacturer: Caffini Model: Libellula 1-3 Condition: NEW Weight: 53.5 kg Delivery head: 7 m Flow rate: 333 l/min Discharge port: 80 mm Engine: Honda GX 160 petrol engine Engine power: 4.0 kW Solids handling: up to 6 cm Accessories: chassis, connection kit, strainer basket Highlights & Equipment: - Diaphragm pump for demanding applications – ideal for sludge, contaminated water & solids - Equivalent to Wacker Neuson PDI 3A & AMT 337G-96B – compatible & proven - Powerful Honda engine – reliable & low-maintenance - Flow rate up to 333 l/min – powerful & efficient - Chassis & accessories included – ready to use - Made by Caffini – professional-grade quality Applications: ✓ Construction & civil engineering ✓ Sewer & pipeline construction ✓ Agriculture & drainage ✓ Municipal use ✓ Flooding & emergency response Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide & international shipping upon request Pricing: Ex works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information provided without guarantee. Subject to prior sale and errors. Prices excl. VAT Further models available! ➡️ New & used machines, accessories & spare parts Buy Caffini diaphragm pump | Libellula 1-3 NEW | Equivalent to PDI 3A & AMT 337G-96B | Trash pump with Honda GX 160 | Caffini quality Your reliable partner for pump technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! On request, we are happy to offer a virtual machine inspection via video call. Tedpfxoz Hvx Dj Ahmec

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width: 1,050 mm, roll diameter: 800 mm, film width: 1,050 mm, heating capacity: 150 kW (203.94 HP), operating speed: 300 mm/s, Equipment: CE marking, Flexographic press, model CARINT SLP 1508, with a central impression cylinder, manufactured in 2004 and 1050 mm wide, featuring a quick-change system for printing plate cylinders. Tedpfsz Ankmjx Ahmjc

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below Tsdpjyalqyjfx Ahmsc We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2002, Lunex 1650 laminating machine, year of manufacture 2002. Laminator by German company LUNEX, year of manufacture 2002 maximum format 1650x2000 mm Tsdsy Hrckspfx Ahmsc Semi-automatic machine for laminating E, B, C, EB flute corrugated board as well as solid board. Automatic feed of the material to be laminated from the pile, manual feed of printed sheets. Automatic glue application. Top sheet grammage from 120g/m2 to 600g/m2. New vacuum transfer belts. The machine is in good technical condition. If you have questions or need further information, please contact us.

Condition: good (used), Year of construction: 1997, functionality: fully functional, 8 colors 1 unwinder 2 cranes for rollers and film/paper Todpfx Ahszzpi Usmec can print on paper and film cameras control operating panel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, working width: 3,060 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 10 mm, back gauge: 1,000 mm, overall weight: 11,400 kg, TECHNICAL DETAILS Sheet width: 3,060 mm Sheet thickness: 10 mm Tedpeyhmgrefx Ahmoc Stroke rate: 12 strokes/min Electric back gauge: 1,000 mm MACHINE DETAILS Control manufacturer: Siemens Total power requirement: 22 kW Dimensions & Weight Space required: approx. 4,100 x 2,300 x 2,400 mm Machine weight: approx. 11,400 kg EQUIPMENT Foot switch

Condition: good (used), Year of construction: 2008, Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Tjdpez A Thbofx Ahmoc Heavy-duty construction with pneumatic shaft and web tension control Integrated splicing table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turn Bar (Web Inversion Unit) Allows reverse-side printing or lamination – flexible for multi-layer label applications Rerailing Section 24” Supports reprocessing or secondary processing of pre-printed materials Additional Modules Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross-Cutting Cylinder (inline sheeting or perforation – precise longitudinal or transverse cutting) Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. Todpfxszx Ri De Ahmec _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: good (used), Year of construction: 2006, functionality: fully functional, working width: 330 mm, MPS Model: EF 330/8 Year of manufacture: 2006 Printing technology: UV Flexographic Printing Number of printing units: 8 colors Web width: 330 mm class Application: Labels / self-adhesive materials / film applications Condition: Very good operational condition Production status: Currently in daily production _____ PRINTING CONFIGURATION 8 x Flexographic Printing Units The machine is equipped with eight flexographic printing stations and offers a highly flexible production platform for professional label production. Suitable applications include: • Process color printing • Spot colors • Varnishes • Special coatings • Paper labels • Film labels • Self-adhesive materials • Front-side printing • Reverse-side printing • Multi-process label applications _____ GEW UV DRYING SYSTEM The machine is equipped with a professional GEW UV curing system. The installed GEW UV technology provides reliable curing performance for UV flexographic inks and varnishes and is well-established in industrial label production. The dedicated GEW UV power supply units are installed together with the press and form part of the existing production setup. _____ EXTENSIVE INLINE CONFIGURATION This MPS EF 330/8 is not simply a basic 8-color flexographic press. Its extensive web path and additional inline modules provide a high level of flexibility for demanding label applications. The current configuration includes: • 8 flexographic printing stations • GEW UV curing system • Unwinding and rewinding system • Web cleaning system • Corona treatment system • Web guiding system • Turn bar / reverse-side printing capability • Inline lamination station • Rotary converting / die-cutting section • Longitudinal slitting equipment • Web / print inspection system • Electronic machine control • Extensive exhaust and extraction system • Safety systems and emergency stops This configuration makes the press suitable for both standard self-adhesive label production and more complex multi-process applications. _____ TURN BAR / REVERSE-SIDE PRINTING A major advantage of this machine is the integrated turn bar and web turning configuration. This allows the material web to be turned during production and enables printing or processing on the reverse side of the substrate. This functionality is particularly useful for: • Backside printing • Multi-layer labels • Peel & reveal constructions • Promotional labels • Technical labels • Special label applications _____ INLINE LAMINATION _____ WEB & PRINT INSPECTION _____ OPERATIONAL STATUS The machine is: ✓ Fully functional ✓ Currently in daily production ✓ Complete and professionally installed Tsdpfszzym Rsx Ahmsc ✓ Available for inspection under production conditions ✓ Supplied with extensive tooling ✓ Suitable for professional label production A production test can be organized by prior appointment. _____ CONDITION Technical Condition ★★★★★☆☆ – 8 / 10 Overall Maintained Condition ★★★★★☆☆ – 8 / 10