Used Berthiez Jo-9375 for sale (182)

Condition: used, maximum load weight: 32,260 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2015, next inspection (TÜV): 09/2026, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, According to our 'General Terms and Conditions'—offered without any guarantee or warranty—we can present you today, subject to prior sale, error, and typographical mistake, the following vehicle on a non-binding basis until finalized: Krone Curtain Side Mega Trailer with Joloda Tracks (Unit 152) First Registration: 10/02/2015 Model: SD Gross permissible weight: 39,000 kg Unladen weight: 6,740 kg Payload: 32,260 kg Inspection (TÜV) valid until 09/2026, Safety inspection (SP) until 03/2026 Fixed bulkhead Curtains on both sides Edschaverdeck sliding roof Lifting roof 13 pairs of lashing rings on outer frame Floor with Joloda tracks + load securing pins/wedges Portal doors 1/2 and 1/2 at the rear 1 pair of LED work lights – 1 each left and right on the front frame 2 x 12t 2-speed gearbox support winches Spare wheel approx. 40% tread, center underbody 1st axle is a lift axle BPW drum brakes Tyres: 425/45R19.5 (1st axle approx. 30/70%, 2nd axle approx. 40/40%, 3rd axle approx. 30/30%) Cedpfx Adeyvmzmj Nsrb 2 x LED reversing lights, 1 x red fog light, rear Price: €3,500.00 (net) All information provided without any guarantee or warranty. Our 'General Terms and Conditions' apply. Legal venue for disputes up to €50,000.00 is the Ludwigslust District Court; for higher sums, jurisdiction lies with the Schwerin Regional Court. Subject to prior sale, errors, and typographical mistakes.

Condition: used, lifting height: 9,000 mm, Year of construction: 2021, operating hours: 1,656 h, load capacity: 3,498 kg, Equipment: air conditioning, cabin, JCB 535-95 Year of manufacture: 2021 1,656 operating hours Air conditioning (AC) 110 HP Joystick control 3 hydraulic circuits 3 steering modes – front wheel, crab steering, all-wheel steering 3.5 t lifting capacity 9.5 m lifting height Price: €53,900 net Available at extra cost: Earth bucket €1,490 net Light material bucket 2 m³ €1,950 net Cjdpfxjyq A Sio Ad Nsrb Light material bucket 2.7 m³ €2,150 net Light material bucket 3 m³ €2,250 net Light material bucket with double wear blade (reversible edge) 2 m³ €2,250 net Light material bucket with double wear blade (reversible edge) 2.7 m³ €2,450 net Light material bucket with double wear blade (reversible edge) 3 m³ €2,550 net For JCB or Manitou, Claas, Merlo Work platform small, 1.2 m wide €990 net Work platform large, 2 m wide €1,549 net Inspection possible at any time by prior telephone arrangement. All details are without guarantee.

Condition: new, functionality: fully functional, Year of construction: 2026, JOSAN CONSTRUCTION MACHINERY ‼️ BRAND NEW ‼️ CHECK OUT OUR VIDEOS ON OUR WEBSITE! ✅ We have the standardized hydraulic Euro hitch—not just any quick coupler! ✅ We offer Euro 5 engines! ✅ In our spare parts warehouse in Gemmrigheim, we stock all replacement parts. So, in urgent cases, we can ship parts within 24 hours. ✅ NEW: Lifting capacity approx. 1200 kg! With an unladen weight of approx. 2300 kg including the bucket – speaks for itself! ‼️ You can also order the wheel loader with a width of approx. 1.30m ‼️ ‼️ Take a look at our Josan S21 wheel loader—it has a total height of only approx. 2.20m! ‼️ Everything should remain simple, robust, affordable, and durable. And at a very attractive price! That’s our daily commitment! – JOSAN Crsdpfx Adoxx Nyho Njb ❗️OUR COMPONENTS set us apart from others❗️ ➡️ Hydraulic Euro hitch (standardized EU dimensions) ➡️ Ongoing quality control throughout the production process ensures extremely high quality. ➡️ Thanks to our know-how and skilled mechanics, we can support you even after the warranty period quickly and easily, both in Germany and throughout Europe. ➡️ Our wheel loaders are deliberately designed to be simple and robust—no unnecessary frills! Straightforward technology that everyone understands. CE certified and additionally inspected by a German company for UVV compliance! ➡️ You are welcome to come and see our stock wheel loaders in person. We are NOT an online-only dealer! Josan S22 Wheel Loader ▶️ Unladen weight only approx. 2300 kg—can be transported with bucket on a trailer ▶️ Lifting capacity approx. 1200 kg ▶️ Dimensions (LxWxH) approx. 4500x1610x2500 mm ▶️ Dumping height approx. 2.75m ▶️ All-wheel drive ▶️ Articulated steering with pendulum axle ➡️ Adjustable steering column ➡️ Excellent all-round visibility ➡️ New large comfort cab ➡️ 0.6m³ bucket (not standard 0.38m³ bucket) ➡️ Hydraulic oil cooler ➡️ UVV NEW – 1 year ➡️ Heated cab with blower, including at the front windshield! Compare for yourself: not every Chinese wheel loader has this! ➡️ Radio with MP3 ▶️ Additional controller—allows you to adjust the tipping speed of bucket/forks ➡️ Extra fan for hot summer days (both doors can be opened) ➡️ Automatic engagement of low and high gear ▶️ 2-speed powershift transmission, electronically controlled ➡️ 3rd and 4th hydraulic control circuits with separate small joysticks Optional: ➡️ Electric joystick for forward/reverse travel with thumb switch on the joystick ➡️ Tires as shown in picture: 31/15.5/15 with agricultural tread (not the standard 12.5/16) ➡️ Float function ▶️ Delivery to your site ▶️ Combined pallet fork with mounts and bale spears! Attention: We supply 1.20m tines and two spears (each spear 90 cm long) ▶️ Euro hitch with hydraulic locking pins Errors excepted. Pictures/text may vary. *Ask about our warranty policy.

Condition: defective spare-parts repository (used), operating hours: 1,395 h, functionality: not functional, fuel type: diesel, color: red, fuel: diesel, Sweeping machine: Credjyv Dm Tspfx Ad Nob + Hako-Jonas + 1100 + 1,395 operating hours + 2-cylinder Kubota diesel engine + Engine turns over + For spare parts / defective Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typographical mistakes excepted, interim sale reserved!

Condition: used, Year of construction: 2021, functionality: fully functional, AVAILABILITY DATE: IMMEDIATELY R 132 | MASPACK PALLETIZER Model: Jollypal 20-12 Year: 2021 Speed: Up to 1,200 boxes/hour Type: Layer Pallet Storage Crjdpjywym Esfx Ad Nob Workable pallet size: 800 mm x 1200 mm ; 1000 mm x 1200 mm Maximum workable pallet height: 2,000 mm Safety protections

Condition: used, Year of construction: 2019, functionality: fully functional, Plasma Cutting System Becky Job Master 6.20 with Extraction Table – Year 2019 This plasma cutting system is being sold due to an upgrade to a laser cutting machine. The machine is fully operational and can be inspected and tested under power. Location: Vorarlberg Technical Data Manufacturer / Model: Becky Job Master 6.20 Year of Manufacture: 2019 Working Area: 6,000 × 2,000 mm Z-Axis Travel: 300 mm Max. Cutting Speed: 75 m/min Dimensions: Machine Length: 8,000 mm Machine Width: 3,700 mm Crjdpfx Aox U Dqiod Nob Overall Height: 2,000 mm Work Table Height: 820 mm All accessories belonging to the system are included, such as: Hypertherm XPR 170 power source Donaldson filtration unit Software etc. Sale excludes disassembly, transport, and installation.

Year of construction: 2021, condition: used, functionality: fully functional, This listing is for a combination steamer (Kombidämpfer) from Eloma, model Joker B6-23, manufactured in 2021, complete with a matching condensation hood. The door on this unit is hinged on the left side. Currently, the unit is equipped with 4 x 2/3 GN shelves, but this can be upgraded to 6 x 2/3 GN shelves for an additional charge. Csdpfx Adsyuv I Sj Njrb The unit has been professionally inspected in our in-house workshop and is fully functional. Please note that the base cabinet shown in some images is not included in this offer. You will receive an invoice with itemized VAT. This unit is ideal for outdoor kitchens, mobile kitchens, food trucks, catering services, and snack bars. 230 VOLT CONNECTION!!! With fixed water connection. Condensation hood included. Our used equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective components (labor and travel costs not included) - High-quality branded equipment at fair prices - Professional refurbishment / inspection and expert cleaning - Tested and fully functional – money-back guarantee if not satisfied - Flexible shipping or pick-up options - Expert advice before and after purchase - Provision of user manuals, wiring diagrams, and spare parts - Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): approx. 515 x 630 x 830 mm Power supply: V:230 / kW: 3.60 / Hz: 50/60 Capacity: 6 x 2/3 GN Weight: approx. 70 kg Serial number: ELN147333 Year of manufacture: 01/2021 Model: EL0509429 Condition: used, inspected, fully functional. Additional features: - Classic control panel with three rotary selectors - Digital display for time, cooking chamber, and core temperature - Multifunction button for individual and specialized cooking programs - Integrated spray hose with automatic retraction - Recording and logging of all HACCP-relevant data - Integrated core temperature probe Shipping: Delivery or pick-up by arrangement Worldwide shipping available on request Shipping to islands or mountain stations by prior arrangement only Subject to change and errors. Do you have questions, need advice, or want to arrange a viewing? Contact us by phone during our business hours: Monday to Friday, 09:00–13:00 and 14:00–17:00. Sales are made exclusively under our general terms and conditions (GTC).

Condition: used, Year of construction: 2013, 2013 | Renault Scarab Major 8001 | Used Sweeper | 240047 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 23500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points 32 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: General condition satisfactory, some signs of wear observed corresponding to the age and use of the vehicle, no major defects to report. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40326 Equippo" is commonly used when looking up more details online. Cedpfxjypt Npj Ad Njrb 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2014, 2014 | Renault Scarab Major 7001 | Used Sweeper | 176087 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 25500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 33 inspection points 31 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: General condition satisfactory. Shows signs of wear consistent with age and mileage. Codpfx Ajyprtaod Nsrb 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. Csdpfx Aeywdtvsd Nerb 380V power supply + compressed air.

Condition: used, mileage: 24,424 km, power: 220 kW (299.12 HP), axle configuration: 4x4, color: orange, driver cabin: day cab, gearing type: semi-automatic, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, For enquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Cedjyuadqspfx Ad Njrb Mercedes-Benz Unimog U530 4x4 skip loader Removable body, superstructure: jotha CombiCon 7018 UL, lifting/ payload: 7,000 kg, front axle differential lock, Euro 6 axle bridge variant, combination cylinder 12/16, axle installation variant Euro 6, reinforced steering components on axle side, synthetic oil (HA), axle ratio i = 6.377, trailer brake, dual-circuit, Haldex disc air brake, wheelbase 3,900 mm, VarioPilot (left/right changeable steering), side protection device, central mounting brackets, rear mounting brackets, front mounting plate DIN76060, type B, size 3, air conditioning, air-suspended driver's seat with seat heating, air-suspended passenger seat, additional left-hand steering column switch, universal mount for control unit, main battery switch at battery box, ABS trailer socket 24V, 7-pin/5-pin, reversing alarm, 32-pin equipment socket, 12V constant power outlets (C3), 12V and 24V center console, 24V/25A on-board socket in cab with C3 signal, rear view camera, generator 28V/150A, monitor for camera system, external sun visor (transparent), immobiliser with transponder, driver’s cab strength per ECE-R-29/03, EasyDrive (hydrostatic drive) (SN), Automatic Shift (EAS), clutch flange Ø150mm (instead of 120mm), gearbox oil filter, increased continuous power hydrostatic drive, hydraulic transmission oil cooler, oil/air, 6-stage tipping cylinder, loose, hydraulic rear connector 4-way, cell 1+2, rear pressure line, second hydraulic circuit, separate rear return line, hydraulics for tipping mechanism, single-acting trailer tipping connection, rear, LS hydraulics, 4-cell, separate continuous use, snow plough relief, implement carrier series, compression level (6) 2, compression level (7-8) 12, chassis LL, digital tachograph 2nd generation, ADR, tachograph manufacturer VDO, pre-installation for warning light for telescopic cylinder, radio with USB port and Bluetooth, pre-installation for toll detection, pre-installation for trunked radio (12V), pre-installation for Truck Data Center 6 (FB Card), 25L AdBlue tank, entry lights, LED flashers yellow left/right with tripods, additional LED high beam on roof bar, cab rear work light (LED, top), additional adjustable LED headlights A-pillar, engine OM936, R6, 7.7 L, 220 kW (299 hp), 1200 Nm, engine version Euro VI E, High Performance Engine Brake, quick radiator cleaning system Clean-Fix, engine PTO incl. front PTO, PTO speed limitation, EATU SCS ON-HIGHWAY EURO VIE, rear cross member for lowered trailer hitch, CTT trailer hitch, 14.00x22.5 drop center rims, red/white retroreflective warning stripes, warning triangle and warning light, weight variant 16.5 t (7.5/9.0), adjustable AHK support bracket, Scharmüller trailer hitch, Rockinger hitch, 48mm pin, Unimog implement carrier, model generation 1, instruments/labels/manuals in German, additional hydraulic control, auxiliary roof lights front and rear, tyre tread: 1st axle 16-18mm, 2nd axle 18mm. Upon request, we will be happy to provide a leasing or finance offer. Mr. Seidel (Tel. ...) will gladly assist you. Further information can be found on our homepage: ... Errors, changes, and prior sale reserved!!! ESP Cab type: Local transport ...

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air. Codpfx Asyvp Ivsd Nerb

Condition: used, mileage: 256,849 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, first registration: 07/2017, emission class: euro6, color: black, number of seats: 17, Equipment: ABS, air conditioning, navigation system, * Our internal no.: 1104 * Mercedes-Benz Sprinter 519 CDI ToJo * Automatic * Driver's seat air conditioning * Passenger compartment air conditioning * Manual wheelchair ramp * Folding tables * Convector heating * Adjustable seats * Seats with 3-point seat belts * Airline track system in the vehicle * Trailer hitch * Ceiling ambient lighting * Nozzle ventilation * Reading lamps * Microphone * DVD * Monitor * Fog lights * Reversing camera * Reversing lights * Multifunction steering wheel * Tinted windows * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! Crjdswnlhijpfx Ad Neb * etc. * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: like new (used), functionality: fully functional, working width 1300 mm cleaning brushes with automatic feed Codsyux Hwspfx Ad Njrb adhesive dosage adjustment via dosing roller safety switch

Condition: excellent (used), The FKS Printjog JL-350 is a high-performance paper jogger with separation air. Specifications FKS PrintJog JL-400 Paper size: 125 x 176 mm (min.) / 320 x 450 mm (max.) Stack height: 90 mm (max.) Design: Floor-standing model with lockable castors Crjdpfsyp E Hysx Ad Njb Antistatic equipment: Integrated ionization device Jogging intensity: Infinitely adjustable Jogging table tilt: Infinitely adjustable Separation air: Infinitely adjustable, switchable Drive: Eccentric motor Functions: Repeat cycling via timer, continuous operation mode, foot switch activation Control panel: Continuous mode, foot switch operation, automatic interval control Separation air from zero to extremely strong Power supply: 230 V, 50 Hz, 700 W Dimensions (L x W x H): 510 mm x 440 mm x 1,250 mm Weight: 35 kg

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Credpfoyur Iuex Ad Neb Includes a ramp.

Condition: good (used), Muro 1002 Paper Jogger Crsdoyur Dpepfx Ad Njb Description: The jogger is designed for aligning collected sets of forms, brochures, and printing sheets. The motor speed is adjustable. The jogging cassette tilt angle is 45°. Technical specifications: Format: 43 x 43 cm Stack height: 10 cm External dimensions: 60 x 60 cm Power supply: 230 V Weight: 40 kg

Condition: used, mileage: 88,727 km, power: 106 kW (144.12 HP), first registration: 02/2023, fuel type: diesel, overall weight: 1,102 kg, color: grey, gearing type: mechanical, Permissible total weight: 1102 kg Crodpfxeyt Uawo Ad Neb

Condition: used, Year of construction: 1998, Portal Milling Machine JOBS JOMACH 241 Year of construction: 1998 Travel X: 3400 mm Travel Y: 2700 mm Travel Z: 1250 mm Numerical Command: CNC Siemens SINUMERIC 840 D Table size: 3000 x 1500 mm Distance between uprights: 1700 mm Crodpoyrcyisfx Ad Neb 1 Tool Changer 32 Tools ISO 50 + 1 Tool Changer 32 Tools HSK-63 3 Milling heads - Axe C: 2 heads TWIST - ISO 50 + HSK 63 A + 1 head 3 axes ISO 50 Weight: 44 T

Condition: new, Year of construction: 2025, ‼️ NEW: NOW AVAILABLE – OUR PALLET FORK COMBINED WITH BALE SPEAR WITH 2 TINES ‼️ ✅ INCLUDING TRANSPORT THROUGHOUT GERMANY (Transport is free of charge for you and not just possible! Compare for yourself! We own our own trucks and work with a forwarding agency!) ✅ 7-year warranty* ✅ Nationwide service in Germany* ✅ We have specialists and our own workshop (many sell from their garden or under tents. Come and see for yourself where you buy! We show reality in the news section on our website!) ✅ Our wheel loaders are sandblasted after welding, then primed with anti-rust paint and finally painted with a thick coat! Rarely to never seen on Chinese wheel loaders! Compare and ask questions! Get written confirmation for your security! ✅ We use standardized hydraulic Euro attachment, not just any quick coupler! Compare for yourself! You are welcome to inspect on-site! ✅ We have a spare parts warehouse! Here in Gemmrigheim! 98% availability from stock! ✅ NEW LIFTING CAPACITY approx. 1200 kg! Our wheel loaders are continuously developed and improved! ✅ We own our own factory in China! ‼️ INCLUDING TRANSPORT THROUGHOUT GERMANY ‼️ ‼️ READY IN STOCK ‼️ CAN BE VIEWED ON SITE‼️ Despite a low height of approx. 2.20m, it has a dump height of approx. 2.85m (lower edge of bucket)‼️ ❗️ OUR COMPONENTS – WHAT SETS US APART ❗️ ➡️ Continuous production monitoring ensures very high quality. ➡️ Through our know-how and skilled mechanics, we can assist you quickly and unbureaucratically even after the warranty period. (Possible throughout Germany and even Europe) ➡️ Our wheel loaders are deliberately built simple and robust – no unnecessary frills! Height approx. 2.20m With a lifting capacity of approx. 1200kg, low entrance height but still a full cab with heating. Try finding that elsewhere, especially at this price! Cjdpfx Adsufwyzs Njrb Josan: years of experience – continuous development and robust quality like in the past. No frills and truly unbeatable prices. Wheel Loader Josan S21 Own weight only approx. 2200 kg – load onto trailer and drive away Lifting capacity approx. 1200kg Approx. dimensions L4200 H2200mm W1600mm All-wheel drive Articulated steering ➡️ Cabin width approx. 1.25m ➡️ Total height approx. 2.20m ➡️ Cabin interior height approx. 1.35m ▶️ Dump height approx. 2.85m ➡️ Cabin interior width approx. 1.10m (compare!) ➡️ Adjustable steering column ➡️ Excellent all-round visibility ➡️ New with large comfort cab ➡️ Bucket ➡️ Hydraulic oil cooler ➡️ New UVV inspection for 1 year ➡️ Safety belt ➡️ Heated driver’s cabin with blower ➡️ Additional fan for hot summers (both doors can be opened) ▶️ Additional controller for adjustable tipping speed of bucket/fork ➡️ Automatic switching between low and high range ▶️ 2-stage torque converter transmission, electrically actuated ➡️ Electric joystick for forward/reverse with thumb switch ➡️ Wide tires 31/15.5/15 agricultural tread (note: the pictures show narrow tires) ➡️ 3rd and 4th hydraulic circuits with separate small joysticks ➡️ Float function ▶️ Delivery to your door Optional: ▶️ Combined pallet fork with mount and spears! Note: We offer 1.20m tines and two spears (the spears are 90cm long) ➡️ Euro mount with hydraulic locking pins Errors excepted Pictures/text may differ *Please enquire about our warranty terms

Condition: used, OTO MILLS Strip Joiner 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills 100% automatic butt-welding unit: GG566 Csdpfxjymatvs Ad Norb

Condition: new, ‼️ NEW ARRIVAL ‼️ FEEL FREE TO WATCH OUR VIDEOS ON OUR WEBSITE! ‼️ You can also order the wheel loader with a width of 1.30m! ‼️ ✅ POWDER COATED ✅ Reverse camera ✅ New, larger luxury cab for increased seating space. The steel has been reinforced again, giving us the current FOPS and ROPS standard! This is extremely important for your safety. ✅ Enlarged entry step ✅ Front windshield ventilation ✅ Stainless steel exhaust ✅ AIR SUSPENDED COMFORT SEAT adjustable to your weight. The seat is used by well-known EU manufacturers! ✅ FREE NATIONWIDE DELIVERY IN GERMANY (transport is free for you and not just possible! We operate our own trucks and have a forwarding agent on hand). ✅ Up to 7 years warranty* ✅ Nationwide service in Germany* ✅ We have experts and our own workshop. ✅ Our wheel loaders are shot-peened, powder coated, and cured after welding. This gives you extreme rust protection! Usually, only premium manufacturers offer this, but it’s INCLUDED with us! ✅ We use the standardized hydraulic Euro quick-attach system – not just any quick coupler! ✅ Euro 5 engines! ✅ We store all spare parts in Gemmrigheim. This allows us to deliver parts within 24 hours. ✅ NEW – Lifting capacity approx. 1,200 kg! With an empty weight of approx. 2,300 kg including the bucket – speaks for itself! ✅ We operate our own factory in China! Check our website for pictures and videos! Codoynvz Sjpfx Ad Norb Technical data: ➡️ Operating weight approx. 2,300 kg with bucket ➡️ Lifting capacity approx. 1,200 kg ➡️ Dimensions (L x W x H): approx. 4,500 x 1,610 x 2,610 mm ➡️ Dump height approx. 2.83 m ➡️ All-wheel drive ➡️ Articulated steering with oscillating axle ➡️ Reverse camera ➡️ With air-suspended comfort seat & retractable seatbelt ➡️ Adjustable steering column ➡️ Excellent all-around visibility ➡️ New, large comfort cab ➡️ Bucket approx. 0.6 m³ (not the standard 0.38 m³ bucket) ➡️ Hydraulic oil cooler ➡️ New UVV certificate, 1 year ➡️ Heated cab with blower, also under the windshield! ➡️ Radio with MP3 ➡️ Auxiliary regulator to adjust tilting speed of bucket/fork ➡️ Additional fan for hot summers (both doors can be opened) ➡️ Automatic selection between low and high gear ➡️ Front windshield ventilation ➡️ 2-speed powershift transmission, electronically controlled ➡️ Electronic joystick forward/reverse with thumb control ➡️ Tires as shown: 31/15.5/15 with agricultural tread (not the standard 12.5/16) ➡️ 3rd & 4th control circuit with separate small joysticks ➡️ Float function ➡️ Transport to your location Optional: ➡️ Stainless steel exhaust ➡️ Bale spear combined with pallet fork. Note: we use approx. 1.20 m tines & two spears (approx. 99 cm long). Bolted and unbolted as required. ➡️ Euro quick-attach system with hydraulic locking pins Subject to errors. Images/text may differ. *Please inquire about our warranty terms.

Year of construction: 1997, condition: excellent (used), Safety work table Make WIBO White type Jekt TCRJO 180/98 with gradation made of stainless steel working space : Depth 920 mm height 1200 mm width 1800 mm working height 600 mm total dimensions : Depth 1080 mm Cedpfx Adshk St Ae Njrb height 2100 mm Height with suction 2550 mm width 1800 mm

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Cjdpfjwaauuox Ad Njrb Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: used, For sale is a HEIDENHAIN operator panel MB 420 with ID 293 757-45 in like-new condition. The operator panel is fully functional and has been tested prior to sale. Details: Manufacturer: Heidenhain Credpfxsylcw Is Ad Nob Type: Operator Panel Model: MB 420 ID: 293 757-45 Condition: Like new Function: Fully functional, tested Warranty: 7 days functional warranty The item will be carefully packaged. Ideal as a replacement operator panel or for immediate use in existing machines and control systems. Please feel free to contact me if you have any questions or are interested.