Used Berthiez Jo-9375 for sale (187)

Condition: used, Year of construction: 2017, operating hours: 3,562 h, machine/vehicle number: 2025065, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 13.320 kg Lifting capacity: 230 kg Working height: 2.250 cm Max. horizontal reach: 1830 m Fodpfjtr H D Uox Ad Njgb Transport dimensions (LxWxH): 9.85x2.47x2.7 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2017, I sell the finger joint line GOMA FZ10 KZ6 + PZ6. Year 2017. Manual feeding to the press Press 6,10m with automatic cycle and end-cutting saw Strong construction. Very good condition. Fedpfx Aov A Sn Hod Njgb Available immediately.

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer Fgsdep R Iwhspfx Ad Neb When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: used, Year of construction: 1999, magnetic clamping plate 1400 - 700 mm Fsdpfx Adjvu Hlqe Negb x-travel 1400 mm y-travel 300 mm dismantled ja weight of the machine ca. 6 t

Condition: used, functionality: fully functional, machine/vehicle number: PT1500, Wanted: De Jong PT1500 Passenger-Goods Lift For an ongoing project, we are urgently looking for a De Jong PT1500 passenger-goods lift. Required specifications: • Suitable for transporting both passengers and goods • Lifting capacity approx. 1,500 kg • 400 Volt drive • Robust, industrial-grade construction • Suitable for professional construction site use • Complies with current safety standards We are open to: • Used • Complete lift or set If you have a De Jong PT1500 available, we would appreciate your offer including price, condition, and availability. Fgjdpfjx Spg Dsx Ad Neb Please respond with photos and technical details.

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Fgedpsifn N Nefx Ad Njb Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Fgodsxk T Igspfx Ad Nsb

Condition: good (used), Flange mount, drive flange -Feed flange with: drive bolt Fjdpfx Aedvdvyjd Nogb -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg

Condition: good (used), Bearing bushings, half-shell, drill bushing -Number: 6x AL 16065 (John Deere) Price: complete -Weight: 2.1 kg Fedpfx Adsb A S D Uo Negb

Condition: good (used), Flange mount, drive flange Fgsdpfx Adodvdvwo Nsb -Feed flange with: drive bolt -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg

Condition: good (used), Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: 315 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Bolt circle: Ø 133.4 mm Fsdpfedvdv Dex Ad Nsgb -Weight: 20 kg

Condition: used, Flange mounting, driving flange Fgjdpedvdvqofx Ad Nob -Chuck flange with: driving pin -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 8, bolt circle Ø 171.4 mm -Weight: 30 kg

Condition: used, maximum load weight: 28,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 09/2025, Equipment: ABS, CARNEHL CSS/AL Moving Floor Trailer * JOST axles * 1 liftable axle * Air suspension Fgsdox Tyadjpfx Ad Njb * Pneumatic control * Disc brakes * Sliding tarpaulin * Double-wing doors with rotary bar lock at the rear * Access ladder and platform at the front wall * ABS connection * 15-pin electrical connector * ISO air connectors with red and yellow coupling heads * 21 boards * Folding tail light guards * Load pressure gauge Interim sale and errors excepted! Sale exclusively according to our terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information intended for initiating a contract. The details provided here are non-binding and do not constitute guaranteed properties.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Fjdpfjx Rbl Njx Ad Negb

Condition: excellent (used), functionality: fully functional, machine/vehicle number: XLRAEL1500L440709, fuel type: diesel, maximum load weight: 12,000 kg, driver cabin: day cab, emission class: euro6, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2014, Johnston VS501: hydrostatic drive 5.1 m³ waste container capacity Fgjdox I Rgdjpfx Ad Njb sweeping left and right 1360 liter water capacity high-pressure water system with reel and spray lance

Condition: new, Year of construction: 2026, Tapping Head Spindle Positioner 90° CORMAK GT24 The 90° GT24 tapping head spindle positioner is an advanced tool that significantly improves precision and efficiency in thread-cutting operations. Its main function is to ensure accurate alignment of the electric tapping machine at a 90° angle to the workpiece, allowing perfect spindle adjustment. Thanks to its innovative design, the GT24 positioner guarantees high accuracy and reliability, making it an essential accessory in any threading or machining workshop. Main Advantages of the GT24 Positioner Precise alignment: The positioner enables quick and accurate alignment of the tapping arm at a 90° angle to the workpiece, which is essential for achieving top-quality threads. Ease of use: The positioning process is quick and intuitive, saving time and increasing productivity. High stability: Thanks to its neodymium magnet, the positioner provides strong and secure attachment to the workpiece, minimising the risk of errors during threading. Compatibility: The GT24 positioner is compatible with a wide range of electric tapping machines available on our website, including models such as RGE30PW, RGE36PWx1200, and RGE36PWx1700. Robust construction: The GT24 positioner is made of high-quality materials, ensuring durability and resistance to intensive industrial use. Design and Technology of the GT24 Positioner The GT24 positioner features a sturdy construction designed for intensive use. Its key component is the neodymium magnet, which allows quick and reliable attachment to the workpiece. This technology gives users full control over accurate machine positioning, helping them achieve excellent results in less time. The unit also includes a 90° calibration system that allows precise setting of the tapping arm at a right angle. This setup enables quick adaptation to different threading tasks, making the GT24 a highly versatile and practical tool for any professional or production environment. Precision and Efficiency with the GT24 Positioner The GT24 positioner provides both precision and productivity. With its fast and simple positioning process, users can save valuable time otherwise spent on manual spindle adjustments. The alignment system ensures exceptional accuracy, resulting in better thread quality and reduced risk of machining errors. Furthermore, the positioner allows flexibility when working with various materials and thread types, making it an indispensable tool in production processes. Technical Specifications of the GT24 Positioner Fedpfoycvfysx Ad Njgb Type Neodymium adapter for spindle positioning Compatible with tapping machines RGE36PWx1200, RGE36PWx1700, RG24x1200, RG24PWx1200, RG24PWx1700, RG36PWx1200, RG36PWx1700 Angle range 90°

Condition: new, EVA Hotmelt Without Filler 280.30/31 Application Examples: Edge Banding For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper, veneer edge bands (with or without nonwoven backing), and solid wood edges. As a general rule, the bonding properties and the substrates’ surfaces to be glued (including back-side primers or other surface treatments) must be checked on an application-specific basis prior to use. Processing Instructions: Automatic feed systems can be used for processing the adhesive granulate. The ambient temperature should not exceed 30°C. Depending on formulation, different types of hotmelt adhesives may be incompatible with each other. Therefore, we recommend thoroughly cleaning application equipment when changing products. Further information is available upon request. Processing characteristics may vary depending on the application technology used and variations in feed speed, which can affect the bonding process. Customer trials are required! Typical Technical Data: Processing temperature [°C]: 180 – 200 Feed rate [m/min]: 10 – 40 Appearance: Terminal digit 0 = yellow opaque Terminal digit 1 = white Density at 20°C [g/cm³]: approx. 1.03 ± 0.03 Softening range [°C]: approx. 90 ± 5 (Kofler heating bench) Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000 Heat resistance [°C]: approx. 80 ± 5 Open time at 190°C [s]*: approx. 6 ± 2 Setting time: not applicable * measured on a 200 µm film Technical data determined according to Jowat test methods Fjdpfxjx Sqnve Ad Nsgb

Condition: new, Siemens 1FT5066-1AF71-4AA0 servo motor SN: EJO10046298016, unused in opened original packaging, 100% functional, scope of delivery as per photos Fgsdom Nx Nwspfx Ad Njb

Condition: ready for operation (used), Siemens 1FT6082-1AF71-3AG1 synchronous servomotor SN: EJ393759602001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fjdpfx Ajw Erayed Njgb

Condition: excellent (used), mileage: 155,000 km, power: 405 kW (550.65 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, operating hours: 5,524 h, Equipment: ABS, crane, navigation system, trailer coupling, = Additional options and accessories = - Power brake booster - Low noise - Air suspension - Air-suspended seats - Reversing camera - Sun visor - Toolbox - Xenon lighting - Power Take-Off (PTO) - Towing hitch = Further information = Axle configuration Front axle 1: Steered Front axle 2: Suspension: Air suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steered; Suspension: Air suspension Weights Unladen weight: 22,215 kg Payload: 18,785 kg Gross Vehicle Weight (GVW): 41,000 kg Functional Body manufacturer: EFFER 525/6S + JIB 4S CE marking: yes Condition Fgedpsx Ahw Hsfx Ad Neb Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: excellent (used), mileage: 155,000 km, power: 405 kW (550.65 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, operating hours: 5,524 h, Equipment: ABS, low noise, navigation system, trailer coupling, = Additional options and accessories = - Power brake booster - Air suspension - Air-suspended seats - Reversing camera - Sun visor - Toolbox - Xenon lighting - Power take-off (PTO) - Towing jaw = Further information = General information Year of manufacture: Jan. 2016 Axle configuration Fjdpfx Asx Ahwtod Nsgb Front axle 1: Steered Front axle 2: Suspension: Air suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steered; Suspension: Air suspension Weights Unladen weight: 22,215 kg Payload: 18,785 kg Gross vehicle weight (GVW): 41,000 kg Functional Crane: Yes Body brand: EFFER 525/6S + JIB 4S CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request

Year of construction: 2006, condition: used, machine/vehicle number: YV2JHC0A06B425826, RHD Emission EUR 3 left and right sweeping Sludge tank 8 m3 clean water tanks 3,500 liters Auxiliary Engine Beam Mercedes Benz OM904 Fgjdpfx Asiy Drasd Nsb Capacity road surface cleaner 120 l/min, 220 bar Hand suction hose on the back

Year of construction: 2007, condition: used, machine/vehicle number: XLRAE45FF0L335676, Johnston VS501: Hydrostatic drive Right side sweeping 5m3 capacity Fedpfx Adjiy Divj Njgb water tank: 1360 liters camera on the back suction arm Central lubrication system

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Fsdpfx Adoxg Hxwj Negb

Condition: used, functionality: unexamined, machine/vehicle number: DX2TLVKJO, Used Brookfield viscometer DX2TLVKJO in case. Fedpfx Aoxmhbyod Nogb