Used Bito P2 Beam - Cross Beams, Used for sale (51,938)

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base Bjdjwb Hxvjpfx Ahmswu - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, PSK series, older generation Tank capacity: 40 to 120 L Standard power supply: 220/380 V three-phase 50 Hz Installed electrical power: 15 kW Electric heaters: 6 × 2.2 kW Compressor power: 3.5 kW Agitator motor power: 0.65 kW Minimum water pressure: 2 atm Water consumption: 400 L/h Thermal fluid: inhibited glycol + water Thermal fluid quantity: 22 L 3-digit digital display 6 operating controls 4 programming controls 7 indicator lights Pasteurization temperature: 50 to 90 °C Programmable holding time: 0 to 30 min Continuous agitation during pasteurization Automatic cooling down to +4 °C Automatic holding at +4 °C Agitation: 15 s every 15 min during holding Discharge by gravity or with agitation Water inlet control to the tank Water control for cleaning the tap Dimensions (L × W × H): 640 × 880 × 1065 mm Net weight: 255 kg Cattabriga PSK 125 ice cream pasteurizer – capacity 40 to 120 L General overview The Cattabriga PSK 125 ice cream pasteurizer is designed for the thermal treatment of mixes used in the production of ice cream and artisanal gelato. This data sheet corresponds to the older generation PSK 125 identified on your machine, which is different from the newer KEL and PRO versions. Its working capacity ranges from 40 to 120 L, allowing for the processing of large volumes of mix in a single tank. What sets this model apart This version of the PSK 125 is based on a robust design combining electric heating, mechanical agitation, and a thermal circuit. The total installed power reaches 15 kW, with six 2.2 kW heaters. The agitator is driven by a 0.65 kW motor, while the compressor delivers 3.5 kW. The control panel features a digital display and controls for operating the machine without using the touch interfaces of the newer generations. Key advantages Capacity of 40 to 120 L for different preparation volumes Installed power of 15 kW, suitable for this tank capacity Bwodjzx Uhqjpfx Ahmou Integrated mechanical agitation during mix processing Thermal circuit using a mixture of inhibited monopropylene glycol and water Electronic controls with digital display Compact construction with a height of approximately 1065 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of cooling: water, degree of automation: automatic, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fridge, fume extraction, safety light barrier, We offer this ready for use Highcon BEAM 2 laser cutting machine, year of construction 2020. IN production, can be inspected on site. The price includes the chiller as well. Bjdpfxey Dq E Se Ahmewu If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2004, condition: used, functionality: fully functional, used peristaltic pump, make: Delasco Paris, model: PCM JZ 237, year of manufacture 2004. This pump is in our warehouse in Oradea, mounted on stainless steel frame. Technical date. the JZ237 model offers the following standard performance parameters: Bodpfsz D U Uljx Ahmswu Pump Type: Low-pressure peristaltic / Slurry pump Maximum Flow Rate: 300 to 600 liters per hour or 7,6 m3/hours Maximum Pressure: 1.5 bar Engine 400 V with power 1,5 kW direct-drive electric motor mounted on a steel base frame. Attached you have the pictures. This pump was making the liquid (milk and other liquids) transfers into a diary factory. This pump is sold with the pipes. Price 2.690 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2026, warranty duration: 12 months, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Total Optimization, High Precision, and Maximum Speed in One Tool TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise Bjdpfev Ip Uzox Ahmewu With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips.

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bsdpsyna Ezofx Ahmewu Yorick Diebels

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Bodpewuck Ijfx Ahmowu

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: 8000S000, overall weight: 1,370 kg, total height: 1,360 mm, total length: 4,150 mm, total width: 580 mm, load capacity: 10,000 kg, Equipment: documentation/manual, Adjustable Bodpey Tqbrjfx Ahmewu Crane manual available.

Condition: used, machine/vehicle number: 008498, Max. panel width: 2200 mm Max. panel length: 3200 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 4 Bwodezvv U Hepfx Ahmou No of Cross Cut Grippers: 10 Panel Rotation Station: yes

Condition: used, Year of construction: 1998, Spindle speeds 6000 rpm Spindle bore 54 mm Turning length 350 mm Bsdpezy Unyofx Ahmowu Turning dia. 170 mm Swing over bed ways 420 mm Swing over cross slide 280 mm X/Z - 165/350 mm No. of stations in turret 12 pcs Control: Fanuc 21i-T Equipped with: 6 tool holders

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Bwjdpfx Ahezzn Iijmou Air filtration using filter hoses, pneumatic cleaning, movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Bsdpfjzq Tzaox Ahmowu Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: used, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 20240416011, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG2, General information Field of application: Construction Weights Empty weight: 1.825 kg Functional Generator capacity: 165 kVA Dimensions of cargo space: 305 x 113 x 173 cm CE mark: yes Other information Fuel consumption: 24,7 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 320 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Bwodpfsw Dag Esx Ahmeu - Tank = Remarks = Only 5 hrs. Traded-in from customer who needs more power. Warranty is still applicable. Used Generator Set.

Condition: used, Year of construction: 1999, Max. pressure 7,5 ton Bsdpezy Un Tofx Ahmewu No. of stations in turret 12 pcs X/Y - 810/540 mm Max. thickness 2,3 mm Indexing station 1 A pcs Indexing station 1 B pcs A-stations 5 pcs B-stations 5 pcs Control: Fanuc 18-PC

Condition: used, Used Chamber Filter Plates Bsdsbppvyepfx Ahmjwu PP 1000 x 1000

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 2,605 mm, total width: 3,135 mm, total length: 3,055 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 1,050 kg, table load: 200 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 200 kg, Equipment: documentation/manual, type plate available, This WENZEL SF 55 coordinate measuring machine is a modern and highly precise solution for the dimensional inspection of mechanical parts. Built in 2021, it is equipped with a 5-axis Renishaw PH20 measuring head, WM Quartis software, and a temperature compensation system, offering high performance in testing and quality control operations. Key features: * Year of construction: 2021 * Measuring range: 500 × 500 × 500 mm * Measuring uncertainty MPEE: 1.8 + L/350 µm * 5-axis Renishaw PH20 measuring head with Head Touch technology * WM Quartis measuring software * Temperature compensation system * WPC 2040 control unit * Complete set of monitor, keyboard, and mouse * Reference sphere included Equipment: - Complete and ready-to-use measuring system Bwsdpjzrtm Sjfx Ahmeu - HT400 (RC) control panel - Compressed air maintenance unit - User, maintenance, and operating manual - CE declaration of conformity Otto Machine For over 30 years, Otto Machine has been selecting and selling used machine tools and measuring systems in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Year of construction: 1989, condition: used, Used shredder Manufacturer: Seybert & Rahier Bodoil Aqqspfx Ahmowu Type: RST 413 Serial no.: 158283 Year of construction: 1989 Q: l/h 0-1000 H: mWS 33 Buffer liquid: 500 cm3

Condition: used, Used Membrane Chamber Filter Plates Bwsdobppv Dopfx Ahmeu 1000 x 1000 PP approx. 190 on stock

Condition: good (used), Code: 0246 Brand: OMGA Bsdpfexztydsx Ahmswu Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimensions 2,240 x 880 mm, motorized height-adjustable counter supports, Bwsdpfxeul Uy He Ahmou 4 pressure beams, individually switchable on and off, 4 swing grids, available from Seevetal location, sold "as is" and as inspected, Ex works, excluding transport, subject to prior sale.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. Bwodpfx Aoz Arqkshmou For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Condition: excellent (used), SCM internships in excellent condition Bwjdpfx Ast Hkq Rohmju

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Pressure range: -1 to 3 bar (drying chamber), 6 bar in the double jacket Material: Stainless steel Driving force: 5,5 KW Bwsdjitcvuspfx Ahmou Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Double coat, Mechanical seal, PT100 thermometer, Shaft heating with Maierkopf HWR 225, Sight glass, Technical documentation. Condition: Used very good Price: on request

Condition: used, Model: DRV250. Includes case, charger, and two 18 volt batteries. Good condition. Multiple units in stock. Price: € 350,- ex VAT Bwedpfx Aezxvhxehmju

Condition: used, Year of construction: 2002, operating hours: 3,702 h, empty load weight: 2,300 kg, Weight: 2300 kg Year of manufacture: 2002 Operating hours: 3702 The machine is in good condition and ready for use. Price: € 12500,- excluding VAT Bsdozzplvopfx Ahmjwu