Used Brevini Em1020/Fs for sale (1,492)

Condition: used, power: 427 kW (580.56 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Brake system For enquiries about the vehicle, Mr. Seidel will assist you (by phone). Iveco S-Way 580 6x2 BDF Hodpeywdcdefx Ab Nefg Axle configuration: 6x2P, 3 axles, trailing axle, cab. AS MY specification, Emission Level Europe, engine: Cursor 13, 580 HP, transmission: TX-12M, 12-speed HiTroniX automated, permissible total weight 26 t, drive axle type SR single reduction, single axle, full air suspension, disc brakes, steered trailing axle, single tyres, container chassis CM vehicle variant, vehicle set-up ON, wheelbase 4,800 mm, steel rims, engine speed 1650 RPM, emission standard EURO VI E, tyre size 315/70R22.5, speed limiter 90 km/h, electrically operated roof hatch, mirror cams. Cover at AS; FHS in body colour, front underrun protection, first-aid kit, plastic bumper, AS high-roof cab, non-heated windscreen, cab roof insulation, electronic immobiliser and second vehicle key, dashboard: plastic with black decorative trim, COC EC certificate of conformity, EU digital tachograph 4.1, static passenger seat, air compressor 2-cylinder 630 cc, with integrated clutch, demand-controlled, smart generator 2880 W (24V x 120A), demand-controlled, SR-SOLO LIGHT 17x, rear shock absorbers, weight variant: front axle 8,000 kg / rear axle 11,500 kg (technically possible 12,000 kg) / trailing axle 7,500 kg (technically possible 8,000 kg), moderate climate version, rear stabilizer, front stabilizer, air filter unit under cab, lift device for trailing or leading axle (TX/P), ride height with 2 settings, omission of rear underrun guard, trailer version for trailer operation with continuous brake system, end cross member, D-value: 130 kN, trailer socket for 24-volt operation, 15-pin, final drive ratio: i 2.31, Connectivity Box 4G incl. TCO service contract, engine idle shutdown, tyre pressure monitoring system (TPMS) internal sensors, VDI interface for telematics services (FMS), version 4.0, infotainment 10-inch TFT display, gear software ECO-Roll (freewheel function), driver drowsiness warning system (DriverDrowsinessAttentionWarning), warning triangle, design and dimensions according to ECE-27, hill start assist (Hill Holder) for comfortable starts on slopes, electronic stability program (ESP), reversing monitoring system with camera, intelligent speed assistance (ISA), front monitoring (MOIS), emergency brake assist (AEBS), preparation for alcohol immobiliser (ALC) with wiring, ECAS air suspension with 2 sensors, rocking mode (free movement mode), left and right luggage compartments, electrically operated cab tilt system, additional heating diesel/water 4kW, fully automatic air conditioning in conjunction with stationary air conditioning, standard fridge and storage box, leather steering wheel, curtains at bed, foldable table in passenger area, lower bed one-piece, firm mattress, upper bed with continuous mattress, ashtray in centre console, electrical pre-installation for tail lift operation according to VEHH standard, electric battery master switch in cab, 210 Ah high performance AGM battery, trailer coupling, make: Rockinger, rear overhang, 1713 mm, fuel tank 710 litres, aluminium, trailer coupling, 40 mm, 130 kN, AdBlue tank 135 litres with integrated step (for CM chassis and 4x2 tractor unit), 145 litres without step, blind spot ...

Condition: used, Year of construction: 1971, x-travel 2000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain type TNC 430 spindle turning speed range 15-1450 U/min Table area 2300x1200 mm Spindle 200 mm spindle stroke 200 mm Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Hfedpfx Asyt R Dxjb Njg

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Hsdpfx Aoyv Inzsb Nofg Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: not inspected (used), power: 2.2 kW (2.99 HP), Projection 650 mm Speeds 12000/18000 rpm. Table 750 x 750 mm Hsdpfxjq U Ih De Ab Nefg Table extension left

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - Hedpsu R S Awjfx Ab Njfg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Hjdpfju R Sztox Ab Njfg Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: used, Year of construction: 1973, KRUPP FS-74 Cutting Machine - incl. dual brake unit (250kg) - incl. drive system - speed control - winding monitor Hsdpfx Abeytcw Rs Nsfg The system is available twice. (price per unit) Please note that the machine must be dismantled, packed, and collected by the buyer.

Condition: used, Year of construction: 2004, x-travel 800 mm y-travel 630 mm z-travel 710 mm Control Siemens type 840Dsl Number of spindles 2 St. turning speeds 30-12000 U/min tool taper HSK 63 Hfodpeyqrx Ssfx Ab Njg Tool changer 80 Pos. Feed 1-40.000 mm/min NC rotary table (B-axis) 250 degrees, minimum indexing unit 0.001 degrees, NC rotary table (A-axis) 360 degrees, minimum indexing unit 0.001 degrees, Cooling system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with sliding carriage, maximum travel 500 mm -Depth adjustment: 0 - 6 mm Hodpfx Aoyn N Ileb Nsfg -Drive: 0.5 kW -Adjustable speed: 1200 - 8000 rpm -Angle: 45° -Accessories: Widia milling head, diamond grinding wheel, vacuum cleaner -Dimensions: 490/870/H1150 mm -Weight: 106 kg

Condition: ready for operation (used), Year of construction: 2020, working width: 520 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, working length: 2,310 mm, This SCM Abricht/ Dickenhobelmaschine was manufactured in 2020. It features a working width of 520 mm and an adjustable thicknessing height from 3 mm to 250 mm. The machine includes a "TERSA" cutter block system with 4 disposable knives and offers four feed speeds. Consider the opportunity to buy this SCM Abricht/ Dickenhobelmaschine wood planer. Contact us for further details. • Working width: 520 mm • Thicknessing height: 3–250 mm (adjustable) • Surface table length: 2,310 mm • Feed speeds: 5 / 8 / 12 / 18 m/min • Cutter block: TERSA system, 4 disposable knives, 120 mm diameter • Control unit: READY electronic control • Programmability: up to 99 programs • Axis control: motorized vertical adjustment of thicknessing table with digital position display • Power-assisted changeover: pneumatic/hydraulic automatic lifting of surfacing tables • Supply voltage: 400 V, 3-phase, 50 Hz • Main motor: 9 kW (12 HP) with automatic star-delta start Hfsdpfxoyiucqj Ab Neg • Braking: automatic electronic motor brake • Suction: 120 mm extraction outlets for surfacing and thicknessing

Condition: excellent (used), wire diameter - max. 5 mm Hfsdoyr Si Hjpfx Ab Neg total power requirement 7,5 kW

Condition: excellent (used), wire diameter - max. 2,5 mm Hfedpfeyrtwlox Ab Nog

Condition: good (used), Manufacturer ZIERSCH & BALTRUSCH Hjdpfxjtpc Ele Ab Nsfg Type FS 2560 year of construction 1987 Machine weight approx. 2000 kg x-path 600 mm y-path 250 mm z-path 500 mm Center height 500 mm Grinding wheel diameter 225 mm Grinding wheel width 25 mm

Condition: used, mileage: 126,595 km, power: 228 kW (309.99 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 13,255 kg, maximum load weight: 12,745 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 08/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: air, number of seats: 5, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, long cabin, suspension seat, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, cruise control, auxiliary heater, 8-speed manual gearbox, ABS (anti-lock braking system), ASR (traction control), constant throttle, PTO (power take-off), differential lock, fog lights, work lights, rotating beacon, storage box, fire extinguisher box, air suspension, trailer coupling with air & lighting connections, aluminum fuel tank, low-noise G1, last axle liftable, last axle hydraulically steered, underrun protection, side aluminum guards, hydraulic cross locking, crane behind cab, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions, green environmental badge. Wheelbase: 4,800 mm. Body: Palift P16 double articulation hooklift system (year 2006) for containers up to 6 m (extendable underrun protection) & Palfinger PK 12502 C crane with remote control, fitted out for driving school. The vehicle was primarily used as a driving school truck! Load diagram: 4.3 m – 2,540 kg, 5.9 m – 1,710 kg, 7.9 m – 1,200 kg, 10.2 m – 890 kg, 12.4 m – 720 kg. Roller height approx. 1,350 mm. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Hfedpfx Ajynl T Dob Neg

Condition: new, functionality: fully functional, The CU 260 FS is a multifunctional woodworking machining center that dramatically increases production capabilities even in workshops with limited space. This powerful and innovative machine is not just a combination of devices, but a complete integrated solution, replacing several machines and offering the full range of essential operations: planing, cutting/sawing, milling, and drilling/mortising. The main advantage of this model is the use of a spiral cutter block with replaceable carbide knives, which reduces noise levels by around 50% and extends the sharpness over 20 times compared to a classic straight-knife cutter block. Technical Specifications Voltage: 400 V Dimensions - width: 1600 mm Dimensions - depth: 2340 mm Dimensions - height: 1150 mm Weight approx.: 456 kg Planer Planing width: 250 mm Cutter block speed: 4,000 rpm Working height: 865 mm Number of knives: 24 pcs. Cutter block diameter: 75 mm Planer fence: 720 x 130 mm Fence tilt range: 90° - 45° Maximum chip thickness: 5 mm Motor power: 2.8 kW Motor power S1 100%: 2.0 kW Planer table length: 1,090 mm Thicknesser Thickness table length: 600 mm Thickness planing width: 250 mm Clearance - minimum material height: 5 mm Clearance - maximum material height: 185 mm Maximum chip thickness: 1.8 mm Feed speed: 8 m/min Extraction port diameter: 100 mm Drilling/mortising unit (CWM 250 series - optional) Drilling table size: 370 x 150 mm Westcott drill chuck: 0 - 16 mm Drilling depth: 90 mm Drilling width adjustment: 160 mm Height adjustment: 85 mm Extraction port diameter: 100 mm Circular saw Table size - width: 900 mm Table size - depth: 345 mm Working height: 865 mm Table extension: 600 x 460 mm Sliding table length - panel/roller: 1,600 mm Sliding table width - panel/roller: 240 mm Sliding table, carriage type: Panel Crosscut length / table travel: 1,600 mm Blade size: 250 x 30 mm Cutting height at 90°: 80 mm Cutting height at 45°: 60 mm Cutting width with guide: 910 mm Main saw blade speed: 4,750 rpm Extraction port diameter: 100 mm Motor power: 3.0 kW Motor power S1 100%: 2.2 kW Spindle moulder Spindle diameter: 30 mm Height adjustment: 110 mm Table opening: 170 mm Clamping length: 90 mm Max. profiling tool diameter: 150 mm Max. tenoning tool diameter: 150 mm Spindle speed min.: 1,400 rpm Spindle speed max.: 8,000 rpm Number of speed steps: 4 (1,400 / 4,000 / 6,000 / 8,000) Extraction port diameter: 100 mm Motor power: 2.1 kW Motor power S1 100%: 1.5 kW Scope of delivery Hedpfx Aboytc N Hj Nofg Spiral cutter head with 24 TCT (carbide) knives Spare TCT knives (5 pcs) Planer fence Hold-down clamp Mitre cutting guide Spindle moulder guide Protective guard with extraction nozzle Connecting hose with Y-branch Aluminium fence with stop Circular saw blade 250 x 3.2 x 30 mm / 24 teeth Digital spindle speed indicator Push stick Tools

Condition: used, Year of construction: 2014, gearing type: other, first registration: 06/2014, mileage: 1 km, driver cabin: other, emission class: none, Direct contact / Used vehicles and equipment: * Wet salt flat silo spreader with * Container volume 1.8 m³ of spreading material * Brine tank approx. 750 l * Hydraulic drive * Twin auger feeding system * Fully route-dependent control system * Foldable spreading disc * PVC folding cover Other information: Hjdpfx Aoymmvdjb Njfg * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport and transfer. * No liability for printing or typographical errors. * Subject to error, modification, and prior sale. * Offer without obligation. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece Hfsded D Dh Aopfx Ab Nsg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year 2000 - Machine with automatic program cycle - rough grinding - finish grinding - spark out - return to starting position. Machine with 2-axis digital readout - stainless steel coolant system - various flanges - fine pole pitch magnetic chuck - including flanges suitable for Jung HF/JF 520. Machine complete with operating manual and wiring diagram - fully tested for functionality. Very little used machine from a test department (original paint). Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediate - subject to prior sale. Payment: as per usual trade terms - before collection - immediately after receipt of invoice. Best regards, Induba GmbH Mathias Becker Hfodpfsvz A Dcjx Ab Nsg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, New arrival Hedpfx Aok Ufz Nob Nofg Hydraulic surface grinding machine Z&B Ziersch FS 2045 T, year 1988 Grinding range 500 x 200 mm – vertical feed – micrometer feed – electronic handwheel – automatic feed – digital readout. Automatic cross feed, both continuous and intermittent, micro-fine cross adjustment – magnetic chuck with demagnetization. Hydraulic overhead dresser – leveling feet – machine has been fully checked – all functions available – runs very smoothly! Electrical circuit diagram available. Pricing: ex stock – subject to prior sale and errors.

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, total height: 2,250 mm, total length: 2,000 mm, total width: 3,050 mm, grinding height: 300 mm, For sale is a CNC surface grinding machine of the brand Geibel + Hotz and type FS 415-Z SL The machine is ready for immediate use and fully functional Technical data Year of construction: 1999 Sanding range: 400*200*300 mm Operating voltage: 400/50 Hz/3 phases Control voltage: 2300/24 Volt Grinding spindle motor: 2 kW Table drive: electro-mechanical Cross-path drive: electro-mechanical Wheel bore: 51 mm Clamping width: min. 10/max. 30 mm Cone: larger D= 25 mm Mounting flange: Da= 108 mm Grinding wheel: 225*25*51 mm Clamping surface: 400*200 mm Dressing diamond: 0.75 carat Belt filter: Available Hodpfx Aeuy Tkzeb Nefg Space requirement: 2000*3050*2250 mm On request, transportation and loading can be organized for an extra charge. Europe-wide can be organized. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, functionality: limited functionality, machine/vehicle number: FS 40, total height: 420 mm, For sale is a Geibel and Hotz surface grinding machine The Z-axis feed has a problem, otherwise the machine is in good condition. Technical data: Slide / X-axis: Table stroke max.: 420 mm Table stroke min.: 150 mm Number of table strokes/min at 400 mm stroke: max. 54 Total length with all covers: 420 mm Z-axis: 205 mm Cover: FS 40 Hanging plates, number: 2 Length: 1270 mm Cross spindle: Pitch: Tr. 30 x 3 Handwheel scaling: 1 turn = 3 mm Handwheel limit switch: P - U1ST Fine adjustment: 0.020 mm Lubrication Spindle nut: Flat track: good Dimensions: Total height (with spindle protection): 2250 mm Height without spindle protection: 1850 mm Table width: 600 mm Total width: 1720 mm Table depth: 1310 mm If requested, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Hfsdpfx Abjv E Hn Ts Nog Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Hfsdpoyhyh Hofx Ab Nog Axle configuration: 6x2P, 3 axles, trailing axle. Cab type: AS MY. Emission level: Europe. Engine: Cursor 13, 500 HP, Euro VIe. Transmission: 12-speed HiTroniX, automated. Permissible gross weight: 26 t. Drive axle variant: SR, single reduction, single axle. Full air suspension. Disc brakes. Steered trailing axle, single tires. Vehicle variant: Container chassis CM. Vehicle set-up: ON. Wheelbase: 4,800 mm. Model year: 2024. Engine speed: 1,650 rpm. Emission standard: EURO VI E. Tires: 315/70R22.5. Speed limiter: 90 km/h. Electrically operated roof hatch (transparent with MLL high roof). Standard black front grille. Manually operated cab tilt. Mirror cams with cover on AS. FHS in vehicle color. Front underrun protection for chassis with a gross weight over 7,490 kg. Plastic bumper. AS high roof cab. Electronic immobilizer and 2nd vehicle key. Dashboard design: plastic with black trim. COC: EC whole-vehicle type approval. Digital tachograph 4.1. Air compressor: 2-cyl., 630 ccm, with integrated clutch, demand controlled. Smart generator 2880 W (24V x 120A), demand controlled. SR-SOLO LIGHT 17x. Rear shock absorbers. Weight variants: front axle 8,000 kg / rear axle 11,500 kg (technically possible: 12,000 kg) / trailing axle 7,500 kg (technically possible: 8,000 kg). Standard overall train brake. Front axle stabilizer. Standard applications. Exhaust pipe outlet to the left. Air filter unit under cab. Lift control for trailing or leading axle (TX/P). Ride height with 2 settings. Rear underrun protection omitted. Trailer version for use with continuous braking system. Rear crossmember, D-value: 130 kN. Trailer socket for 24 volt operation, 15-pin. Rear axle ratio: i = 2.31. Connectivity box 4G incl. TCO service contract. Engine idle shutdown. Tire pressure monitoring system (TPMS), internal sensors. VDI interface for telematics services, version 4.0. Infotainment 10" TFT display. Gearbox software ECO-Roll (coasting function). GPS cruise control Hi-Cruise. Drowsiness warning system (Driver Drowsiness Attention Warning). Warning triangle compliant with ECE-27 directive. Hill start assist (Hill Holder) for easy hill starts. Electronic Stability Program (ESP). Reversing camera monitoring system. Blind spot monitoring system (BSIS) on the right. Intelligent Speed Assistant (ISA). Front area monitoring (MOIS). Emergency brake assist (AEBS). Pre-installation for alcohol interlock (ALC) with cable. NOISE ECE 51/03. Standard EU vehicle width. ECAS air suspension with 2 sensors. Speedline aluminum wheels, SLT. Plastic parts of the cab painted in cab color. Left and right luggage compartments. Transparent sun visor mounted outside on cab roof. Additional diesel/water heater, 4 kW. Fully automatic air conditioning in combination with stationary air conditioning. Standard refrigerator and storage box. Leather steering wheel. With curtains at the bed. Signal horn behind bumper (compressed air). Foldable table in passenger area. One-piece lower bed, firmness: hard. Upper bed with continuous mattress. Ashtray in center console. Electrical pre-installation for tail lift operation, ...

Condition: good (used), Year of construction: 1988, functionality: fully functional, Surface grinding machine Geibel&Hotz Type FS 40 Primus SA Hfjdoyh Hutepfx Ab Nsg Condition: good Fully functional

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm The infeed table is adjusted via a parallelogram mechanism Both jointer tables feature noise-reducing table lips Precision bearing cutterhead with reversible knives Thicknessing table with centrally guided column and support Adjustable spirally serrated feed roller for optimum planing results Technical data: Jointer width: 410 mm Table length: 1800 mm Table height: 850 mm Cutterhead speed: 4500 rpm 4-knife cutterhead Cutterhead diameter: 100 mm Jointer fence tiltable: 90 - 45° Max. cutting depth: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Workpiece clearance min./max.: 3 - 225 mm Max. cutting depth: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space required: 1800 x 850 mm Hfodpewzzyujfx Ab Nog Availability: short notice Location: Röllbach

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 100,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds. Hodeyf A U Hopfx Ab Nsfg