Used Carpentry Machine for sale (65,120)

Condition: used, Labeller that applies a label to the top and the bottom This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side. Dcedpfx Aoz Ndf Rjdren It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling machine, top and bottom label Label heads: 2 (above and below the belt) Controls: Touchscreen Construction: Stainless steel frame on adjustable feet

Condition: used, Grasselli RST 520 M Membrane Skinning Machine The Grasselli RST 520 M is a compact membrane skinning machine with an ergonomic working height. The machine is equipped with a quick blade change system. Integrated safety features ensure a high level of operator safety. The entire structure is made of 6 mm thick stainless steel. The toothed roller is cleaned by a dynamic toothed roller cleaning system, designed to ensure maximum cleaning efficiency with minimal compressed air consumption. The machine is equipped with two fixed wheels and two swivel casters for easy movement. Technical Specifications Djdpfxsz Nd Aqj Adrscn Working width: 520 mm Voltage: 400 V (3+N, 50 Hz) Power: 0.75 kW Year of manufacture: 2002 Compressed air supply pressure: 6 bar Machine dimensions (W × D × H): 750 × 700 × 950 mm

Condition: used, functionality: fully functional, Year of construction: 1990, degree of automation: manual, punching force: 20 t, Equipment: emergency stop, foot remote control, Well-maintained machine in good working order, but without any additional tools. Dedpfez I Tqgsx Adrjcn

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Dcsdpsz Ngk Rofx Adrsn

Condition: new, Year of construction: 2023, machine/vehicle number: 15562, type of input current: three-phase, overall weight: 900 kg, input voltage: 400 V, operating pressure: 7 bar, input frequency: 50 Hz, Single-sided drilling and dowel insertion machine Omal Velox 1300, manufactured in 2023. Equipped with a glue gun sensor and a laser measuring device. Dcodpfxoz Ngkde Adrsn

Condition: used, axle configuration: > 3 axles, first registration: 02/2020, total length: 10,950 mm, total width: 2,550 mm, suspension: steel, wheelbase: 9,750 mm, color: yellow, Year of construction: 2020, Equipment: ABS, BPW axle. Drum brakes. Leaf spring suspension. Hydraulic ramps, operating on 24 volts. Max. technical weight: 40,000 kg. Coupling to the end of the trailer: 1090 cm. 40 mm / 50 mm towing eye = Further information = Brakes: Drum brakes Dcsdpez Ntfhjfx Adrjn Suspension: Leaf spring suspension Unladen weight: 9,100 kg Payload: 26,900 kg GVW: 36,000 kg MOT (Technical Inspection): valid until 02/2027 Model number: DIEPLADER / OPRIJ - MACHINE TRAN = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 2021, machine/vehicle number: B740, functionality: fully functional, operating hours: 3,500 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 8,005 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 274 mm, workpiece length (max.): 8,005 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 274 mm, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: CMS, total height: 4,300 mm, total length: 10,500 mm, total width: 4,860 mm, overall weight: 2,200 kg, table length: 9,736 mm, table width: 2,080 mm, high-pressure hose length: 11 mm, water pressure: 4,130 bar, Equipment: CE marking, documentation/manual, We offer this used CMS Tecnocut Smartline machining center, year of construction 2021. Manufacturer: CMS Model: Tecnocut Smartline Year of manufacture: 2021 Condition: used Category ID: 2075 Type ID: 970 Type: machining center CMS Tecnocut Smartline CNC Waterjet Machine. See attached document for accurate dimensions. 8m x 2m steel honeycomb bed, up to 413MPa water pressure. Includes machine (with water tank), HMI & stand, reverse osmosis unit, pre-pressure intensifier (6 bar), CMS JetPower Evo Intensifier (4130 Bar), Clean water storage tank, Filter System for recycling water, Hydrogen Peroxide Dosing System, light guards, spare HP tube & orifice inserts. Dcodpfx Adsz E Rmyerjn Manuals and machine drawings available upon request. Video showing machine running available on request. If you have any questions or need more information, feel free to send us a message or give us a call. As shown in the photographs, the catch tank shows wear from use, including localised corrosion and small rust-through areas on a few internal support beams; the machine remains operational and inspection is welcome.

Condition: excellent (used), Akbend ASM140 Bending Rolls 3 Rolls 140mm top roll 1250mm length x 5mm thickness Year 2007 Motor power 2.2kw Dcjdez Hdv Depfx Adrjn

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Dcjdpfx Adjw U Uh Dsren Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: new, OptiProLam 360 Automatic Laminator with Digital Foiling The OptiProLam 360 is a fully automatic laminating and digital foiling system designed for today's commercial and digital print environments. Handling sheet sizes up to 360 x 570 mm, the OptiProLam 360 delivers exceptional lamination quality, premium digital foiling capabilities, and outstanding production efficiency in one compact finishing solution. With automatic suction feeding, pneumatic roller pressure and the ability to laminate both sides of the sheet in a single pass, the OptiProLam 360 is designed to increase productivity, reduce operator intervention and open up new opportunities for value-added print. Key Features Sheet size up to 360 x 570 mm Single-sided lamination Double-sided lamination in one pass Production speeds up to 9 metres per minute Automatic suction feeder Oil-filled heated chrome laminating roller 150 mm pile feeder capacity Automatic sheet registration with adjustable overlap Self-centring sheet guides Dcsdsz H Sa Rspfx Adrsn Pneumatic roller pressure system Pneumatic burst separation with micro-perforation Touchscreen speed and temperature control Adjustable de-curling system Integrated digital foiling rewinder Advanced Lamination Performance The OptiProLam 360 features an oil-filled heated chrome laminating roller, designed to provide even and stable heat distribution across the full working width. Combined with adjustable pneumatic roller pressure, this helps deliver reliable laminate bonding and a smooth, professional finish across a wide range of digitally and lithographically printed materials. Benefits include: Oil-filled heated chrome roller for stable, even heat distribution Pneumatic roller pressure for consistent pressure across the sheet Reliable laminate bonding Smooth, professional finishing Consistent results across a wide range of printed media With production speeds of up to 9 metres per minute, the OptiProLam 360 combines professional lamination quality with the productivity required for busy digital print environments. Single & Double-Sided Lamination in One Pass Designed for maximum efficiency, the OptiProLam 360 offers both single-sided and double-sided lamination in a single pass. Unlike single-sided systems that require two passes for double-sided lamination, the OptiProLam 360 completes the process in one operation, dramatically improving workflow efficiency and reducing production time. Benefits include: 50% reduction in production time Increased productivity and throughput Reduced labour requirements Reduced operator handling Faster turnaround times Consistent, high-quality results on both sides of the sheet Whether producing brochures, book covers, presentation folders, menus, packaging, or premium marketing materials, the OptiProLam 360 enables more work to be completed in less time. Specifications Manufacturer Glendale Model OptiProLam 360 Condition New Stock Number 115002 Max sheet size 360mm x 570mm Min sheet size 150mm x 280mm Sheet feeder Yes, suction feed Feeder capacity 150mm Paper weights 80gsm - 350+gsm Speed Up to 9 metres per minute Single & double-sided lamination Yes Roller pressure Pneumatic Sheet separation Automatic, via pneumatic pressured roller Warm up time 5 minutes Digital foiling Yes, rewinder included Air compressor Included Power supply 220/240v 50/60Hz Machine weight 312kg Dimensions (L)1990mm x (D)750mm x (H)1420mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Djdsx Dbkcjpfx Adrscn Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Dcedpfezrg T Eex Adrsn Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Dsdpfjulpmzjx Adrscn Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Year of manufacture: 2007 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months. Dcsdpfx Aoxiy R Esdrjn

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25510, total width: 790 mm, total length: 850 mm, total height: 830 mm, empty load weight: 295 kg, Export is possible. Dodpfjyw N H Uex Adrjcn

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Dsdpfxez Nc Nnj Adrocn Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: used, Year of construction: 2004, functionality: fully functional, REF: MM6444 Cimec America AM DPS 9-8-1C-1VA rinser, filler and capper monoblock. Manufacturer: C.I.M.E.C., Italy. Serial number 045, built 2004. CE marked, with EU Declaration of Conformity. A compact monoblock with 9 rinsing nozzles, 8 isobaric (counter-pressure) filling valves, a crown capping head and a ROPP capping head, for still or carbonated drinks in glass bottles. Carbonated product needs to be carbonated before filling. The machine does not include a carbonator. Filling Single pre-evacuation with CO2 bottle purge (not double pre-evacuation) No vacuum pump fitted Up to 2,000 bottles per hour (owner's figure), depending on bottle size and product Capping ROPP (screw cap) head enabled, set up for 28mm ROPP caps on MCA bottle finish Crown capping head disabled. The current owner never used it and its condition is unknown. An engineer would need to assess what is required to bring it back into use Change parts 330ml, currently fitted 200ml Not included Conveyors, drive or accumulation table CIP system Dodpfxey Um Ans Adrecn Also included Spare seals, wear parts and spares for the filling heads, pedestals, rinser and drive train Spare parts list Condition Last in production in August 2025, when it was fully operational. Now in storage. The owner describes the machine as well used and in working order, but needing an engineer to get it fully up to speed. Videos of it running are available on request. Electrical 400V, 50Hz, 3-phase, 4.5kW Dimensions Approx. 3.5m long x 1.4m wide x 2.1m high (2.6m at the capper) Weight: to be confirmed. Documentation EU Declaration of Conformity and operator manual (English) for this serial number. Location Aylesbury, UK. (in storage) Viewing by appointment

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazak, controller model: SmoothG, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 18 W, spindle nose: DIN 67871A, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We are pleased to offer this very well-maintained Mazak VCN 530C vertical machining centre with a Lehmann 500 Series 4th/5th axis, manufactured in 2017. The machine is equipped with the user-friendly Mazatrol SmoothG control system. This machine impresses with its high precision, reliability and productivity, and is ideally suited for single-part and batch production. Technical specifications: Table dimensions: 1300 x 550 mm Table load capacity: 1200 kg Number of pallets: 1 NC rotary table: Lehmann T1-510520LL X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 – 12,000 rpm Dcsdpfxez Nd Tcs Adron Spindle mount: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Bystronic BySprint 3015 2kW Fiber Laser With Byloader Sheet Loader And Shuttle Table. New 2011. Upgraded head and new fibre fitted in 2020 at a cost of £46k. Maintained by Bystronic. Dsdez It U Sepfx Adrocn Fume extraction. Available with Nitrogen plant including Sauer Tornado Booster Compressor.

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Dsdpozx D Dbefx Adrjcn Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Hopper Material: 304 stainless steel 1. Food standard 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. More videos & photos on request.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, saw blade length: 2,825 mm, cutting height (max.): 230 mm, cutting range round steel at 90°: 230 mm, Well-maintained machine in good condition. Dcsdpfjz I U Dnjx Adrjn

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: Dcjdpfx Asy Dfclsdrjn You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: 1 x Ricoh Pro 8310 with the following specifications: Dedpfxoy Altbs Adrjcn Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Epson SureColor SC-F2100” production system. Item for sale: 1x Epson SureColor SC-F2100 We can easily configure the machine to your specifications. Feel free to contact us! Counter readings: Total: 0 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly. Dodpfx Ajzh Dcvsdrecn

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 19172, Equipment: chip conveyor, CNC machining center Heckert HEC400F, Serial No. 19172, Year of Manufacture 2016 including: - Chip conveyor Starrag KF86, Serial No. 21600130-3 - Emulsion filter system Lehmann KSS162, ID No. 210600284-3, Year of Manufacture 2016 - Industrial cooling system Hyfra 27 Alpha 13-E-S, Serial No. 2003206, Year of Manufacture 2016 - Siemens Sinumerik control system - Oil mist separator LTA The machine can be purchased via online auction on our website (HPC). You can access the website by clicking on the link in the advertisement. Auction end dates: Djdpfx Asz Nifkodrecn October 19, 2026 to October 22, 2026