Used Cascade 100D for sale (260)

Condition: excellent (used), Year of construction: 2024, ENGEL DUO 36060/2700 TECH INJECTION MOLDING MACHINE Year of manufacture: 2024 Clamping force: 27,000 kN (2700 tons) Robot: ENGEL VIPER 90 CLAMPING UNIT Clamping force: 27,000 kN Mold opening stroke: 3300 mm Maximum mold opening distance: 4100 mm Minimum mold height: 800 mm Maximum mold height: 2200 mm Column spacing (H × V): 2180 × 1750 mm Platen dimensions (H × V): 2970 × 2640 mm Opening force: 770 kN Opening force with hydraulic cushion: 1600 kN Dry cycle time (EUROMAP 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Injection volume: 24,100 cm³ Theoretical injection weight (PS): approx. 21.9 kg Injection rate: 2620 cm³/s Injection pressure (regenerative mode): 1300 bar Maximum injection pressure: 1600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Torque at maximum speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s INJECTION NOZZLE Nozzle stroke: 1300 mm Nozzle closing force: 210 kN EJECTION SYSTEM Ejector stroke: 400 mm Ejector forward force: 420 kN Ejector return force: 420 kN HEATING SYSTEM Number of heating zones (including nozzle): 12 Installed heating power: 160.9 kW DRIVE AND HYDRAULIC SYSTEM Installed motor power: 355 kW Motor power for charging pump: 3 kW Hydraulic oil tank capacity: 3500 l COOLING SYSTEM Nodpfx Abjz N Et Dj Relh Required cooling capacity: 66.9 kW Water consumption (supply temperature 32°C): 5.88 m³/h ADDITIONAL EQUIPMENT Linear robot: ENGEL VIPER 90 Movable / pull-out guide column Hot runner control: 160 zones Hydraulic core control: 3 + 3 Cascade control: 72 channels

Condition: used, Year of construction: 2015, heating capacity: 54 kW (73.42 HP), power: 78 kW (106.05 HP), Chamber-type washing system Manufacturer: SUGINO ZIPPEL Type: ZD-4.000-RAST Year of manufacture: 2015 Technical data: - Dimensions (length/width/height): approx. 4020 x 2460 x 2600 mm - Total power: 78 kW - Filling capacity: 1,200 l - Load capacity: max. 0.5 - Bath temperature: 65 °C - Heating capacity: 54 kW Cleaning tank: - Volume: 600 l - Pump: 3 bar - Heating: 9 x 3 kW - Dosing pump: 10 bar Rinsing tank: - Volume: 600 l - Pump: 2 bar - Heating: 3 x 9 kW - Cascade pump: 0.28 bar Drying: Blower: 2 x 5.5 kW Vapor extraction: 16 kW Nledpfxszq Hlxo Ab Reh Machine designation: Chamber-type washing system Pump: 2 bar Vapor extraction: 16 kW Volume: 600 l In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) Nledpfx Ajzkttcsb Rjh _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Nlodpozz Smcsfx Ab Rjh Ejector safety interface 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment Nljdsz Slltepfx Ab Roh • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air Njdpfszlbqrjx Ab Rjlh - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS according to specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base fra...

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Nledpfx Aozvwl Tjb Rjh Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, overall weight: 11,500 kg, transport length: 11,800 mm, input voltage: 380 V, transport height: 2,200 mm, transport width: 2,400 mm, Equipment: documentation/manual, PRIMULTINI SE-CEA-IEA 1100 RIGHT-HAND LOG SAWMILL with loader and unloader 1) SE 1100 COLUMN 1100×120 mm flywheels for 130×7500 mm blades electric blade tensioner and blade guide 60 hp engine with automatic starter 2) CEA-IEA CARRIAGE 4 vices with electric clamping and release vice opening 900 mm 3 hydraulic log turners electric spacers with two speeds hydraulic feed with cable rail length 16.5 m control panel 3) COMPLETE AUTOMATION INCLUDING: Nledpfxjz Rvdps Ab Rjh - 5000 mm 3-way log loader with 4 loading arms - unloading system with 6500 mm motorized conveyor with helical rollers (for side or longitudinal unloading) with 2 pneumatic log handling arms 4) FOUNDATION DRAWING AND OPERATION AND MAINTENANCE MANUAL - disassembled by specialized technicians, ready for loading - transport dimensions: open-top semi-trailer or 40″ open-top container - weight 11,500 kg

Condition: used, 2 × KWB Powerfire TDS 300 – biomass boiler cascade Two automatic wood chip boilers, each rated at 300 kW, with a combined output of approximately 600 kW. The boilers can operate independently, allowing flexible output adjustment and redundancy. Njdpfoy A Ewtjx Ab Relh Features: - Rotary grate combustion system - Cyclone combustion chamber - Lambda-controlled combustion - Automatic output modulation - Automatic heat exchanger cleaning - KWB Comfort 3 controls - Suitable for wood chips and pellets Scope of delivery: two boilers with boiler-side feed augers and drive motors. Fuel-store extraction and additional conveying equipment are not included; available separately on request. The net price is for both boilers together. Inspection, exact equipment, collection location and transport must be agreed in advance. Installation and commissioning are the responsibility of the buyer. We also offer biomass boilers, pellet boilers, wood gasification boilers, pumps, buffer tanks, feeders and heating accessories.

Year of construction: 2007, condition: like new (used), 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap Nedpfx Aezuzvgjb Rolh 155 Tier pitch Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator full cascading refrigeration pack included in a container More photos and spec upon request

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100D Servo inverter module -Type: 80VD1 00PD.C022-01 -Dimensions: 200/65/H105 mm Nledpoyhm Ngefx Ab Roh -Weight: 0.9 kg.

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function Nlsdjzktkzspfx Ab Rsh 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun)

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar Nlodpfxjzrikmo Ab Rjh • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s Nodpfeztpkpsx Ab Relh 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 units of recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery. - Temperature 200°C, can be increased to 250°C! - Charging car, 5 units available, modification on request. - Homogeneous temperature distribution of +/- 10°C. - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control system - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door locking system - Rated power: 180 kW - Connection power: 241 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity Nedpfx Aboy Tkfwj Rolh We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Curing oven, Post-curing of liquid crystal windows, CFRP support structure, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Nledpfx Aboz Az Ias Reh Robot VIPER 40 Laser Conveyor Belt

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013056, empty load weight: 3,290 kg, maximum load weight: 9,800 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2023, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 1,060 mm, total length: 9,690 mm, total width: 2,550 mm, total height: 3,580 mm, suspension: air, tire size: 235/75 R17,5", color: yellow, Please note: the images are archive photos. The vehicle may be in use! #Chassis centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly inclined, new design with "Load-Lock-Profil" for lashing straps - 1 pair of geared landing legs at front, straight lower section, one-side operation on the right in direction of travel - Side door stays, steel underrun protection - Anti-spray mud flaps on last axle only, rear impact protection - Spare wheel carrier (1 wheel) with fastening kit - Platform height 1060 mm #Towing equipment - Drawbar with approved 40 mm drawbar eye, haulage version - Drawbar height mechanically adjustable via threaded spindle, below floor level, max. range 200 mm - Drawbar length mechanically adjustable approx. 1950 - 2300 mm, lockable approx. every 50 mm, set to approx. 2100 mm #Axles + suspension - BPW axles at manufacturer's choice, tapered roller bearings, S-cam brakes - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system, colour-coded lines for easy servicing, spring-brake parking brake - Duomatic connection at front, with connecting line to the truck - EBS, electronic braking system with EBS connector at front - Please note: only to be towed by vehicles ensuring ABS effectiveness! - Raise/lower valve, vehicle stability system #Wheels and tyres - 235/75 R17.5, make at manufacturer's choice, steel rims, factory silver #Electrics - 24 V, multi-chamber lamps - Yellow LED side lighting, also coupled with indicators (flashing side marker lights) - 2 white front position lights, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front - 2 additional LED work lights at rear, switched via reversing light #Floor - Film-faced plywood approx. 30 mm, for high point loads - Premium floor sealing, floor jointed all round - Platform length approx. 7,300 mm Njdpfx As Afwuzsb Relh #Front wall / front corner posts - Through-loading via double-leaf front portal doors, each with 2 internal cam bar locks - Steel corner posts, release device for side tarpaulin - Bridge plate approx. 2,400 mm wide, divided once, approx. 350 mm long for resting on tail lift, capacity approx. 1,800 kg, incl. tail lift support - (Drawbar length then approx. 2300 mm; with 2000 mm tail lift, coupling set-back on truck min. 20 - max. 240 mm) #Side boards - 25 mm aluminium hollow profile, 400 mm high, drop-down and removable #Centre stanchions - 1 pair of sliding stanchions, movable along entire length #Insert slats - Wooden insert slats #Rear wall / rear corner posts - Steel corner posts up to lower edge of roof - Tarpaulin attachment with round tube and tensioning ratchet - Double-leaf rear portal doors, each with 2 internal cam bar locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning buckles - Customer lettering Dachser on side tarpaulins and rear portal #Roof - Fixed roof with tarpaulin and roof bows, tarpaulin colour: white - Optimised rain gutter at rear on end bow, above doors #Country of registration / plates - Germany, Dekra inspection and expert report (§13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould Nedpfxoz Rplys Ab Rolh 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: good (used), functionality: fully functional, Year of construction: 2015, load capacity: 3,000 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, power: 44 kW (59.82 HP), Equipment: trailer coupling, Diesel forklift LINDE H30D-02 EVO Year of manufacture: 2015 According to counter: 12,490 operating hours 3-ton lifting capacity 2.25 m overall height 4.80 m lifting height 44 kW - Triplex full free lift mast - CASCADE rotator (left/right/infinite) - Work lights - Original paint - Immediately ready for operation Selling price: €12,900 net Nsdpfxsyi Hc Ne Ab Rolh Affordable delivery available!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1100 DG, total length: 2,300 mm, total width: 2,300 mm, total height: 2,300 mm, type of input current: AC, pivoting range: 120 °, input voltage: 400 V, overall weight: 5,400 kg, cutting range round steel at 45°: 510 mm, cutting range round steel at 90°: 510 mm, space requirement height: 2,500 mm, space requirement length: 2,300 mm, space requirement width: 4,400 mm, cutting range square steel at 45°: 700 mm, We are offering this used MEBA MEBASteel 1100 DG double mitre saw, manufactured in 2014. Nodpfx Aezx N Tzeb Rolh Manufacturer: MEBA Model: MEBASteel 1100 DG Year of manufacture: 2014 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system Nlsdpfoxa Ettex Ab Roh 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, Year of construction: 2025, load capacity: 4,000 kg, lifting height: 17,550 mm, total length: 7,350 mm, Max. Tragkraft: 4000 kg Max. Hubhöhe: 17.55 m Max. Reichweite: 13.08 m Ausbrechkraft mit Schaufel: 7766 daN Aufwärtsneigewinkel: 16 ° Abwärtsneigewinkel: 110 ° Wenderadius (über Räder): 3.94 m Nsdpfx Aszxiqtob Relh Heben: 16 s Senken: 12 s Teleskop ausfahren: 16 s Teleskop Einfahren: 13 s Ankippen: 4 s Auskippen: 4 s Motornorm: Stage V Zylinderzahl / Tragfähigkeit der Zylinder: 4 - 3621 cm³ Nennleistung Verbrennungsmotor - Leistung 100 Hp / 75 kW Max. Drehmoment / Motorumdrehung: 410 Nm @ 1600 rpm Zugkraft: 7850 daN Getriebetyp: Drehmomentwandler Anzahl der Gänge (vorwärts / rückwärts): 4 / 4 Fahrgeschwindigkeit (beladen): 25 km/h Max. travel speed: 24.90 km/h Max. Fahrgeschwindigkeit (kann je nach geltenden Vorschriften variieren): 24.90 km/h Parkbremse: Automatische Parkbremse Feststellbremse: Ölbad-Lamellenbremse an Vorder- und Hinterachse Typ Hydraulikpumpe: Zahnradpumpe Hydraulikfördermenge / Hydraulikfördermenge – Hydraulikdruck 167 l/min-270 bar Motoröl: 10 l Hydrauliköl: 135 l Fassungsvermögen des Kraftstofftanks: 140 l Geräuschpegel im Fahrerstand (LpA): 79 dB Umgebungsgeräusch (LwA): 106 dB Schwingungsbelastung Hand/Arm: < 2.50 m/s² Lenkräder (vorne / hinten): 2 / 2 Antriebsräder (vorne / hinten): 2 / 2 Kabinen-Zertifizierung: Kabine ROPS - FOPS Stufe 2 Steuerungen: JSM

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, immediately available -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units available, modification possible upon request -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions W x D x H: 3750 x 1400 x 2300 mm -External dimensions W x D x H: 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with good sensor as cascade control -Temperature limiter -Signal tower -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door lock -Rated power 180 KW -Connection 241 KW!!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity Nodsy Avqwspfx Ab Rjlh We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing, Postcuring, Post-curing of liquid crystal windows, CFRP support structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm Nedjl H Hy Hepfx Ab Rslh - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation

Condition: used, functionality: fully functional, Year of construction: 2016, total length: 100 mm, total height: 100 mm, total width: 95 mm, overall weight: 570 kg, input voltage: 230 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, power: 1.7 kW (2.31 HP), We are offering this used EOS M 100 dental 3D printer, manufactured in 2016, for sale. Serial number: SI 2764 Wiring diagram number: 250000543 Year of manufacture: 2016 Voltage (1~/N/PE): 230 V Voltage (2~/PE): 200–240 V Current consumption (1~/N/PE): 8 A Current consumption (2~/PE): 8 A Mains fuse rating (1~/N/PE): 16 A Mains fuse rating (2~/PE): 15 A Frequency (1~/N/PE): 50 Hz Frequency (2~/PE): 60 Hz Rated power: 1.7 kW Rated short-circuit current: 5 kA Nlodpey Szv Refx Ab Rjh Total weight: 570 kg If you have any questions or require further information, please feel free to send us a message or call us.