Used Case Rounding Machine for sale (77,275)

Condition: new, Rollmak 3-Roll Round Bending Machine SM 90-12/3.0 Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1250 mm Sheet metal thickness 3.0 mm max. Sheet metal thickness for pre-bending 2.5 mm Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1850 x 700 x 1200 mm Motor: 1.1 KW Equipment: Top and bottom roller, electrically driven Top roller can be swung out Taper bending device Pjdpfx Ajlu Enroi Tegu asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1570 x 130 Special equipment included in the price: Motorized adjustment of the lower roll Hardened rolls Motorized adjustment of the rear roll 2 x digital display Sheet metal width 1570 mm Sheet metal thickness 6.0 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1570 mm Smallest diameter 195 mm Roll diameter 130 mm Weight 1520 kg Dimensions L-W-H 3050 x 630 x 1020 mm Motor 2.2 kW Equipment: Top and bottom roll, electrically driven Pgodpfoiu Hvtsx Ai Teu Top roll can be pivoted outwards Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 150 Technical specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display sheet metal width 1070 mm sheet metal thickness 8.0 mm max. sheet metal thickness 7.0 mm for pre-bending roller length 1070 mm smallest diameter 225 mm roller diameter 150 mm weight 1400 kg dimensions L-W-H 2600 x 630 x 1020 mm motor 4.5 KW Equipment: top and bottom rollers electrically driven Pgodpfxsiw D Ecs Ai Teu top roller can be pivoted out conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 2,070 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity 2070 x 1.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control Pgsdpfx Aovkkkiei Tou - Emergency stop - Documentation - 400V

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Podoz Slplepfx Ai Tsgu Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Max. working width: 3,100 mm Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Podjzxdk Ispfx Ai Tjgu Power: 15 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Weight: 11,500 kg Transport packages: 2 EQUIPMENT CE marking

Condition: new, Fastech 3-Roll Round Bending Machine FRS-S 2050 x 190 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized lower roll adjustment 2 x digital display Pedpfehzq D Usx Ai Tsgu Sheet metal width 2050 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for pre-bending 6.0 mm Roll length 2050 mm Roll diameter 190 mm Smallest bending diameter 285 mm Weight 2,695 kg Dimensions L-W-H 3600 x 1100 x 1200 mm Motor: 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pgodpfx Aiozza U Ue Tou Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Pgedpfx Aot Akt Rji Teu Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: excellent (used), Catalog number 7979 TECHNICAL DATA - Max. diameter of workpieces 130mm - Fitted sleeve 57mm - Min. length of input material 800mm - Tool head drive motor 18.5kW - 4 types of feed speeds + forward/reverse - Feed motor 2.2kW In sequence: - 6 toothed draw-in rollers - 3-knife tool head - 6 smooth draw-out rollers - Diameter of exhaust outlet 140mm - Additional sleeves included: 40, 45, 50, 75mm Psdpfjzwwwlox Ai Tjgu - Dimensions (L/W/H) 3100x1300x1400mm - Weight 2100kg ADVANTAGES - Made in Poland - 3-knife tool head - Additional sleeves included: 40, 45, 50, 75mm - Used lathe, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm Pgjdpfxsf S Tg Ts Ai Tou - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Pgjdpfx Aiodzqn Do Tsu Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: new, roller (bottom) diameter: 46 mm, roller (top) diameter: 46 mm, roller diameter: 46 mm, working width: 1,050 mm, - Capacity 1050 x 0.8 mm - Roll diameter 46 mm - Conical roller - Swivel top roller Pgjdpfor H Hanex Ai Tsu - Documentation

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, input voltage: 400 V, empty load weight: 225 kg, - Capacity 1050 x 0.8 mm Psdpfx Aor Iza Rei Tegu - Roll diameter 46 mm - Conical roller - Swivel top roller - Foot control - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2024, - Capacity: 1070 x 3 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Tapered rollers Pgsdpfxegg Rbpe Ai Tju - Brake motor - Foot switch - Emergency stop - Documentation - 400V

Condition: used, Field of application: Construction Fits to following machines: Case 521 F Pgods Agguijpfx Ai Tsu Please contact Sjoerd Overbeek for more information

Condition: reconditioned (used), König Mini Rex 4000 Futura heading machine, 2-row, with forming station DR-RR400. For the production of circularly knitted, long-rolled, and wound products, as well as flat-compressed products. SK58-AK70 weight range: 30–120 g Pgjdez Ia H Ijpfx Ai Tju Output: 4000 pieces/hour Used and refurbished. Price upon request.

Condition: new, Year of construction: 2026, number of rollers: 3, Equipment: swiveling upper roller, - Capacity: 700 x 4 mm - Conical rollers - Removable top roller Pgedpfoh Raytjx Ai Tsu - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Psdpfx Aszyy Aisi Tjgu Features and technical specifications: - Cuts flush with straight and miter cuts (up to 45°) - For solid strips up to 30 mm - Bevel (0–20°) - Rounds veneer and plastic edges - Workpiece thickness: 5–50 mm - Automatic workpiece clamping - Cutting operation triggered by foot switch - Saw blade diameter: 150 mm - Rounding cutter: 100, radius: 2–3 mm - Saw blade tilt: -20° (bevel) – 45° (miter) - Working height: 720 mm - Movable workpiece support: 820 mm - Motor power: 0.55 kW - Pneumatic connection: 5 bar

Condition: new, Ostas 3-Roll Round Bending Machine SBM 1270 x 95 Special equipment included in the price: Hardened rollers Motorized rear roller adjustment Digital display Features: • Asymmetrical 3-roll round bending machine with motorized drive • Hardened rollers • Motorized rear roller adjustment • Digital display • Top roller can be swiveled out • Taper bending device • Foot switch Technical details: • Sheet metal width: 1270 mm • Sheet metal thickness: 3.0 mm Pgsdpfx Aisg Tzbhj Tju • Roller length: 1270 mm • Roller diameter: 95.0 mm • Smallest bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions L-W-H: 2100 x 760 x 1250 mm • Weight: 470 kg

Condition: new, - Capacity: 700 x 2 mm - Conical rollers - Removable top roller - Foot control - Emergency stop - Documentation Pgodpfx Aeihv Hpei Tju - 400V

Condition: as good as new (ex-display), Year of construction: 2024, turntable diameter: 390 mm, bending angle (max.): 360 °, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) Pgsdpfegqfp Hsx Ai Tsu This machine solves your bending tasks!

Condition: good (used), Year of construction: 1997, Allround R120-3 radial roller sorting machine For grading root crops by size, such as like carrots, chicory, red beets, onions and flower bulbs. Pgodpfjz Rfqfox Ai Tju 2 conveyors 60 cm wide1 conveyor 40 cm wideAdjustable speedAdjustable heightDiameter rollers 57 mmChain pitch 63 mmSorting 6-69 mm This machine is equipped with lateral placed grading rollers out of stainless steel. The distance between these rollers changes in steps over the different grading stages. Conveyor belts are placed under the machine, one for each grading size. When the distance between the rollers changes above the size sections, every second roller lowers its position. This ensures a proper positioning of the product between the rollers. The speed is adjustable by frequency control, Estimated capacity (tons/hour)R120Carrots8Baby carrots5 – 8Red beet8 – 10Potatoes8 – 10Parsnips3 – 4Onions8 – 10Set onions6 – 8 More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: new, Rollmak 3-Roll Round Bending Machine ST3 130-15/6 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1550 mm Pgodpslu Evnofx Ai Tsu Sheet metal thickness 6.0 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1550 mm Roll diameter 130 mm Smallest bending diameter 195 mm Weight 1650 kg Dimensions L-W-H 3250 x 850 x 1300 mm Motor: 3.0 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Rollmak 3-Roll Round Bending Machine SME 130-15/4.5 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1550 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1550 mm Roll diameter 130 mm Smallest bending diameter 195 mm Weight 1210 kg Dimensions L-W-H 2650 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rolls electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Pgsdolu Ernspfx Ai Tju Safety rope Values apply to St-37 / 240 N/mm² CE marking