Used Cnstamp 30 Degree H104Mm for sale (27,052)

Condition: ready for operation (used), Baumüller BUS20-60/135-30-001, refurbished and tested in accordance with professional standards, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Serial number: 91314741. Bjdpfx Aji D T Hujhmowu

Condition: ready for operation (used), Lenze 9225_E.3A.30 servo drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Bsdpfxei Ebxxo Ahmewu

Condition: new, INA KUSE 30 L W1 G3 V1/700-30/30 ball screw assembly, set of 2, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Bwodpfsi Ec Hasx Ahmsu

Condition: new, pressure 30 t Bodpfx Ahsxabg Nsmswu stroke 150 mm table surface area 185 mm Breite column travel between the guideways 530 mm weight of the machine ca. 162 kg dimensions of the machine ca. 800 x 700 x 1805 mm

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates Bwsdpfxezycpxo Ahmsu - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Veneer press with 30 floors Bwsdpfx Ajyh A E Uehmou Size of press plates 3000 x 1650 mm Hydraulically operated. Hot water for heating In-feed system and out-feed system included

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & Emergency hand pump, Full steel floor Equipment: - Charger - 6x Lashing points - Electric pump Net: €6,008.40 / Gross: €7,150.00 Article number: UDK230301811.01 Technical data: • Brand: Unsinn • Model: UDK 3017-30-14 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 306 x 175 x 35 cm • External dimensions (L x W x H): 450 x 191 x 113 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,000 kg • Unladen weight: 790 kg • Payload: 2,210 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side panels anodized, double-walled • All side panels can be folded down and removed • Steel corner posts removable • Rear flap can also be pivoted • Option to attach at all 4 corners for tarpaulin frames, grid extensions, side panel extensions or front wall extensions • Stable toggle lever locks • Full steel floor, 3mm hot-dip galvanized – extremely robust • Drawbar and frame hollow profile construction welded and completely hot-dip galvanized • Many cross members, resulting in high point load capacity • All transverse and longitudinal members rest on the ground • 6 folding lashing points, mounted recessed in the floor frame profile (600DaN/kg) • 6 lashing points under the loading area • U-profile on the rear, for easier attachment of the ramps • Ramp compartment prepared • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency hand pump, for manual tilting in case of empty battery • Detachable remote control for E-hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel, for safely parking the loaded trailer, load capacity 500kg • Premium maneuvering handle with ratchet strap reel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT. - Vehicle registration certificate can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Bodpfx Ahszy A E Homswu Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Bwsdpfozb Dq Iex Ahmsu

Condition: used, Thrust: 600 TON. Barbed points: no. 2 Model: AF 600 MB 30-60 Bwedjq N Ettepfx Ahmou Year of construction: 1994 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 110 ton.

Condition: used, power: 24 kW (32.63 HP), color: yellow, Year of construction: 1996, operating hours: 11,776 h, CATERPILLAR GEP30 OLYMPIAN GENERATOR SET...30 KVA DIESEL GENERATOR...IN GOOD WORKING ORDER...STARTS AND RUNS... Bjdpfsi Uz Iqox Ahmowu

Condition: excellent (used), mileage: 422,117 km, power: 315 kW (428.28 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 470 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 8,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking air conditioner, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Speed limiter - Air horn - Parabolic suspension - Particulate filter - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Towing jaw = Further Information = Technical Information Number of cylinders: 6 Bsdpfxswhprrs Ahmowu Engine displacement: 10,677 cc Axle Configuration Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Weights Unladen weight: 14,110 kg Payload: 29,890 kg Gross vehicle weight: 44,000 kg Functionality Body brand: VDL S-30-6600 Condition Technical condition: Very good Visual condition: Very good Identification License plate: 61-BKH-9 MERCEDES-BENZ AROCS 8X4 VDL S-30-6600 HOOKLIFT TIPPER EURO 6 430 HP 8X4 DRIVE WHEELBASE 485 CM FULL LEAF SUSPENSION DIFF LOCK AUTOMATIC WITH ENGINE BRAKE TRAILER COUPLING VDL S-30-6600 HOOKLIFT TIPPER HYDRAULIC CONTAINER LOCKING TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU ГОВОРИМО УКРАЇНСЬКОЮ

Condition: used, working width: 3,500 mm, Hydraulic press brake Manufacturer: HARTMANN, Model: AKP 30-35C Year of manufacture: 1994 Technical specifications Manufacturer: Hartmann Model: AKP 30-35C Year of manufacture: 1994 Capacity: 300 t Working length: 3500 mm Overrun distance: 4 mm Overrun time: 40 ms Safety distance: 64 mm Connected load: 30 kW Equipment • CYBELEC DNC 70 control system All information provided without guarantee. A demonstration under power can be arranged upon request. The company Hartmann is based in Germany (Frankfurt region). Today, Hartmann specializes in the repair and servicing of sheet metal processing machines. Bodpfx Ahswucgismowu

Condition: excellent (used), For sale is a Weiler C30 x 750 DJ02 lathe from 2008 in very good, well-maintained condition. The machine comes from a training environment and has been used accordingly with care. It is in very good technical and optical condition and has its original paint. Technical data / Equipment: * Manufacturer: WEILER * Model: C30 x 750 DJ02 * Year of construction: 2008 * Type: Conventional lathe Bwjdpfx Ahez Aitpjmju * Application: Training / Workshop * Very good, well-maintained condition * Original paint Accessories / Scope of delivery: * New collet quick-change system * 3-jaw chuck * Multifix B quick-change tool holder * Technical documentation Due to its very good condition, the machine is ideal for training companies, workshops, locksmiths, mechanical production, and general workshop use. Inspection possible by arrangement. WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED 9/7 kW Speed range 1 – 4,500 min-1 Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Cross 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force cross 3,000 N Max. rapid traverse speed longitudinal/cross 6/3 m/min THREADING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 Gg./inch TAILSTOCK Arbor diameter 50 mm Arbor stroke 110 mm Internal taper DIN 228 MK 3

Condition: used, Year of construction: 2008, Universal filling machine, Fritsch, model UFG-EPA-08RHG-NL20 Year of manufacture: 2008 Bodpfx Ajz A Saijhmowu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,366 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: telescopic, construction height: 3,150 mm, motor manufacturer: VW, fork length: 1,196 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 225/75 - 10, overall weight: 4,575 kg, total height: 3,150 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: liquid petroleum gas (LPG), LINDE H 30 T - 02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.900 mm Closed height: 3.150 mm Mast: Standard (2W490) Bwodpfoz Aqryex Ahmou Fork length: 1.196 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (80%) / 225/75 - 10 (25%) Service weight: 4.575 kg Length: 2.700 mm Width: 1.300 mm Year of manufacture: 2013 Operating hours: 3.366 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover Internal no.: 1202060 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 6,605 kg, construction height: 2,000 mm, fuel type: electric, total length: 5,310 mm, drive type: Elektro, arm reach: 6,250 mm, construction width: 1,190 mm, working height: 10,890 mm, Articulated telescopic boom lift Speed class: 4.8 Technical condition: New Battery condition: New Bodpfezu Ea Nox Ahmswu Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repairs – you can get everything you need from a single source. Lease-purchase options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp.

Condition: excellent (used), mileage: 30,191 km, color: white, lifting height: 30,000 mm, Year of construction: 2006, operating hours: 1,136 h, Drivetrain Drive: Wheel Bwjdpfx Aeyi Hdgshmeu Weights Empty weight: 7.450 kg Functional Lifting capacity: 1.300 kg Dimensions of cargo space: 860 x 230 x 320 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Klaas K 25-30 TS * 2006 * Diesel drive * 1136 working hours * Equipped with a man basket * Refurbished remote control * 30-meter working height * 25-meter horizontal reach * 1300 kg lifting capacity * 30,191 km * 7,450 kg net weight

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Bwjdpsmqkr Dsfx Ahmeu

Condition: used, Year of construction: 2012, fuel type: gas, Lifting capacity: 3.000 kg Please contact Gebrauchtgeräte Center for more information Bwedezfnbwopfx Ahmsu

Condition: used, Year of construction: 2005, operating hours: 20,098 h, Type of fuel: Electric Colour: Grey Empty weight: 8.255 kg Dimensions (LxBxH): 242 x 130 x 239 cm Lifting capacity: 3.000 kg Lift height: 360 cm Fork dimensions: 1.070 x 990 mm - Year: 2005 - Documentation available: Yes Bsdpfx Ajyvf E Ajhmewu - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516045005907 - Operating hours: 20098 - Lifting capacity: 3000kg - Lifting height: 3600mm - Overhead clearance: 2390mm - Free lift: 0mm - Fork length: 1070mm - Maximum fork width: 990mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Radio, Full cabin, Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 5 PzS 775 - └ Battery year of construction: 2017 - └ Capacity: 775Ah - └ Battery voltage: 80V - Transport dimensions: 2426mm x 1300mm x 2390mm (l x w x h) - Transport weight [kg]: 8255kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, Nominal output: 29.8 kW Air flow rate: 2400 m³/h Combustion chamber depth: 580 mm Loading door: 330 mm x 330 mm Heatable volume: approx. 600 m³ Heatable area: approx. 120 m² Space requirement: approx. 600 mm x 800 mm x 1900 mm Weight: 230 kg Flue pipe diameter: 160 mm Warm air outlet nozzle: 2 x 200 mm Bedpfx Ahoz A Eapomowu Operating modes: Automatic and manual Chimney diameter (approximate): 200 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,983 h, load capacity: 3,000 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,180 mm, tire condition: 30 %, front tire type: superelastic tires (black), front tire size: 23 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 5,589 kg, total height: 2,270 mm, total length: 2,500 mm, total width: 1,300 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-30 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.760 mm Closed height: 2.270 mm Mast: Triplex (3F476) Fork length: 1.180 mm Fork carriage: 3 A Drive: Elektro 80V Battery: 80 V 620 AH v. 2011 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik SE 23 x 10 - 12 (30%) / 18 x 7 - 8 (40%) Service weight: 5.589 kg Length: 2.500 mm Width: 1.300 mm Year of manufacture: 2011 Bwodez Apycjpfx Ahmsu Operating hours: 5.983 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Heating, Pulse control ATTACHMENTS Sideshift Internal no.: 1309140 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2014, Lifting capacity: 200 kg Bsdpfszfl A Sjx Ahmjwu Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2013, fuel type: electric, Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Bodpfx Aezrrxgjhmowu

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Bjdpfxozl Ap No Ahmowu