Used Cold Storage Lock for sale (20,209)

Condition: used, Used Machine Ksdezlbn Depfx Ai Rsna Features and Technical Specifications: - Lock case milling unit - Handle hole driller - Face milling cutter - Motor: 1.7 kW - 2,800 rpm - Includes accessories Location: 65439 Flörsheim Availability: Available immediately

Condition: used, machine/vehicle number: IC1479, Year of construction: 2021, operating hours: 2,091 h, load capacity: 1,200 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,900 mm, battery voltage: 24 V, 5257567 Kjdpfxozv A Uaj Ai Rena Serial Number: 90635761 Battery Details: 24v 166ah COLD STORE

Condition: used, machine/vehicle number: IC1474, Year of construction: 2021, operating hours: 653 h, load capacity: 1,200 kg, lifting height: 3,200 mm, fuel type: electric, mast type: duplex, construction height: 1,915 mm, battery voltage: 24 V, 5257564 Serial Number: 90627693 Battery Details: 24v 166ah Knsdpfozv A T Aox Ai Roa COLD STORE

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. Kodpfx Aszuzw Doi Rona The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Knjdpfozuyxyjx Ai Roa Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2021, functionality: fully functional, 2.3m storage shelving, 200 cm high, 60 cm deep, with 3 levels, steel shelves. For sale due to lack of space. Industrial shelving, available at a low price. Very easy to assemble. Ksdszvwhujpfx Ai Rona

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Knedpfx Aisxqfwto Roa

Condition: used, Stainless steel tank 100m3 Knedpextmy Uefx Ai Rja Diameter 4m Total height 8.25m

Condition: used, 150m³ (1500hl) Stainless Steel Tank Grade AISI304 Knjdpfxexcxito Ai Rja Wall Thickness: 2.2mm Bottom Thickness: 3.3mm

Condition: used, 30m³ stainless steel tank features a full-height stainless steel coil Diameter 2.97m Total height 5.40m Knodoyw Ub Repfx Ai Rsa Cylinder height 4.30cm Leg height 30cm Cone height 30cm Gear motor height 50cm

Condition: used, empty load weight: 5,150 kg, maximum load weight: 12,850 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2007, loading space length: 7,550 mm, loading space width: 2,470 mm, loading space height: 600 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, lift and lower function, ABS (anti-lock braking system), lashing eyes, container locking mechanism, U-shaped protection, side aluminum fender, twin tires, storage compartment, swing-out tailgates. Superstructure: 2-axle flatbed trailer with aluminum sideboards and twist-lock locking mechanisms, 2x BPW axles, drum brakes! Loading height approximately 950mm! Used sparingly, in excellent condition! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Knjdpfx Aijx A H S Ao Rsa

Condition: used, tank capacity: 100,000 l, total height: 13,000 mm, outer diameter: 3,500 mm, 100,000-liter stainless steel tank with insulation Knedpfxjzvxc Tj Ai Roa Diameter: 3.5 m Height: 13 m

Condition: good (used), total height: 7,500 mm, outer diameter: 2,750 mm, 32000l Insulated stainless steel tank with a side-mount propeller agitator Diameter: 2.75 m Height: 7.5 m Slightly conical bottom Ksdpfezvwlgsx Ai Rena It has legs

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 Knodszuygqopfx Ai Rsa • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Year of construction: 2019, MEP Tiger 352 SX EVO Cut Off Saw, 4000mm Roller Conveyor with Length Stop, Weight 410kg. S/No. 562821/31B (2019) Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Knodpfx Aijzr I Ahs Rsa

Condition: good (used), Saw blade diameter: 1310 mm Cutting diameter: 440 mm Kjdpfx Aezvawxji Rona Machine weight: approx. 7.5 tons

Condition: used, functionality: unexamined, The shuttle warehouse features multiple storage levels, allowing for fully automated storage and management of pallets. The pallets are transported into the warehouse via the existing conveyor system and assigned to their respective storage locations by the shuttle system. The multi-level design ensures optimal utilization of the available storage space. The system enables rapid and automated retrieval of pallets for dispatch, which streamlines logistics processes and reduces waiting times. The system is particularly suitable as a buffer warehouse between production, palletizing, and loading, ensuring a continuous flow of materials. Scope: • Fully automated shuttle warehouse • Multiple storage levels for Euro pallets • Infeed and outfeed technology • Associated conveyor technology • Control and system technology (where applicable) Functionality unverified, but was in use until recently. ATTENTION: Mobile, small peripheral equipment is not included in this item. Please contact us if you have any uncertainties regarding the scope before placing a bid. We strongly recommend inspecting the item! Knjdpfx Aszvc S Eei Rea If interested, please contact us by email!

Condition: used, Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible. Knjdpfxezuz Amj Ai Rea

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2002, loading space length: 8,050 mm, loading space width: 2,550 mm, total length: 10,210 mm, total width: 2,550 mm, total height: 1,020 mm, suspension: air, tire size: 265/70 R19.5, wheelbase: 5,750 mm, color: other, Year of construction: 2002, = Additional options and accessories = - 20 Ft Twist Lock - Air Suspension - Drum brakes - Lift Axle - Stability Control = Remarks = Trailer in mint condition 8.60 m loading floor length including open tailgate ( 8.05 ) Cage Monkey Connection (Pneumatic) Hardwood floor Spindle holes + Spindles (Also middle staves "Swedish") Kedpfx Aiozuf Dnj Rsna 20 Ft. Twist-Lock Connection Lifting / Lowering Air Suspension Tires like new 40 mm Towing eye Dual air connection Removable bulkhead BPW Assen = More information = Axle configuration Front axle: Double wheels; Max. axle load: 10000 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Rear axle 1: Double wheels; Lift axle; Max. axle load: 9000 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Rear axle 2: Tyre size: 265/70 R19.5; Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90%; Brakes: drum brakes; Suspension: air suspension Weights Empty weight: 6.140 kg Carrying capacity: 21.858 kg GVW: 28.000 kg Functional Height of cargo floor: 102 cm Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good Identification Registration number: WD-SX-71 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Volume: 50,000 liters Manufacturer: EVS Available quantity: 2 Diameter: approx. 3,500 mm Knsdpfx Aeww Em Doi Rsa Cylindrical height: approx. 6,900 mm Overall height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Angle of the upper floor: 15° Angle of the cone: 90° Equipment and connections: In the upper floor: 1 x access dome DN 600 with hinged cover 1 x ventilation nozzle 1 x roof edge railing with handrail 2 x crane eyes 1 x flange for filling line 1 x block flange for measuring and control technology On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe supports for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator One of the silos also has a single-flight access ladder with back protection. Otherwise, as shown in the pictures and drawings.

Condition: used, New: No Field of application: Construction Empty weight: 3.375 kg Dimensions of cargo space: 606 x 244 x 259 cm Cargo space capacity: 24.000 l Serial number: CRXU 865261 Production country: UK Knjdpfxjzt Hlds Ai Rja Please contact Team DPX for more information

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 106000162, total height: 4,400 mm, total width: 2,350 mm, total length: 10,470 mm, construction height: 4,400 mm, construction width: 2,350 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,000 kg, input frequency: 50 Hz, input current: 28 A, Equipment: documentation/manual, Kardex Remstar LR-35 vertical buffer module (Compact Buffer / Miniload-in-a-Box) with integrated SmartLOG pick-to-light system. Year 2020. Like new, never used. Zero operating hours. Knodjztzqbepfx Ai Rja The system was fully commissioned by the installer, but the company ceased operations before it entered service, so the machine has been idle in like-new condition since installation. Technical data (nameplate): Type: LR-35-20X400X600X4400 Serial number: 106000162 Year: 2020 Manufacturer: Kardex Produktion Deutschland GmbH, Neuburg plant Nominal voltage: 3/N/PE 400 V, 50/60 Hz Nominal power: 20.0 kVA / 28.8 A Max. load per bin: 35 kg Certification: CE, TUV SUD, GS Configuration (installer specification): Dimensions: 2,350 mm wide x 10,470 mm long x 4,400 mm high Storage: 2 aisles x 20 portals x 17 levels 675 bins of 400 x 600 x 122 mm Useful volume: 19.76 m3 Throughput: 110 to 130 bins per hour At 4.4 m high, the machine fits a standard warehouse, unlike taller LR units that require a very high building. Location: San Sebastian, Spain. Sold ex location, buyer arranges dismantling and transport. Full documentation available (invoice, CE declaration, manuals, installer technical specification, and layout drawing). A second identical unit (2019, low use) is also available. Price negotiable. Serious inquiries welcome.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) Knedpjzt Twyofx Ai Rea 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Characteristics: * Storage capacity: ~ 10300 T * Inlet: max. 75 reels/hr * Outlet: max: 25 reels/hr Ksdpfx Aisvl Enxo Rena * Channels: 264 * Storage length: ~ 5160 m * Height: ~ 30 m * 2 receiving robots * 2 reel stacker cranes Description Automated warehouse for storage of (paper) reels with the following characteristics: * Diameter: 500 – 1500 mm * Width: 600 – 2250 mm * Weight: max. 5000 kg

Condition: ready for operation (used), Year of construction: 2012, An automatic Kasto dual-tower storage system is available. Cassette usable dimensions X/Y/Z: 6500mm/840mm/440mm, cassette external dimensions X/Y/Z: 6620mm/976mm/485mm, C-profile height: 245mm, max. cassette payload: 1000kg, storage locations: 49, lifting unit speed: 22m/min, pull and push speed: 20m/min, system performance: 30double cycles/h, overall system dimensions X/Y/Z: approx. 7600mm/7250mm/7900mm. Documentation available. An on-site inspection is possible. Kjdpezd Eivefx Ai Rsna