Used Cordless Electrik Hightorque Screwdriver for sale (144)

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Bedpfxetuzqps Ahmjdh Location: 54595 Prüm

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) Bsdpovxux Hefx Ahmsdh - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: ready for operation (used), Stöger 9278 screwdriving automation SN: SES003743 with 2 x Kistler Z90002.15 sensors SN: 5078913 + 5078912, used, in good condition, 100% fully functional, scope of delivery as per photos. Bedpsz Ac I Tefx Ahmedh

Condition: used, maximum load weight: 930 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2023, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,560 mm, total height: 895 mm, Gross vehicle weight: 1,300 kg, high loader trailer, with overrun brake, 100 km/h, rear tipper, equipped with BAST-Ing PumpFast cordless drill pump. Errors and prior sale excepted. Bjdpfx Aoym Ig Rshmedh

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing operations Type: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Load capacity: 10 to 14 kg Outreach: 250 to 550 mm Vertical guide column: Ø 25 mm Bsdpfx Asfx Hxzehmsdh Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Movable in three axes (horizontal, vertical, rotational) - 1 unit balancer for vertical movement TECHNA, Type 9340, adjustment range 10 to 14 kg - Adjustable locking pawl for vertical movement, manual release via Bowden cable - For weightless suspension of small devices - Load capacity adjustable - Constant tensile force Space requirement L x W x H: 880 x 500 x 1120 mm Weight: 23 kg Good condition

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Cordless angle grinder M18 FSAG125X-0X Cordless circular saw M18 FCS552-0 Cordless reciprocating saw M18 FSZ-0 Bodpjwzlwkjfx Ahmedh LED cordless hand lamp M18 TLED-0

Condition: used, Year of construction: 2024, Manufacturer : Transvis Model : TR7 Year : 2024 Bdsdeyxr Uwepfx Ahmoh Type: All-in-one unit: dosing, filling and capping machine rotary table with indexing mechanism Hopper / Feed tank Automated dosing system Blow/suction station Filling station Screwdriving station Capping station Ejection station Outfeed conveyor Three operator stations for manual loading / feeding of the machine. HMI with Omron PLC Dimensions maximales du produit pouvant être utilisé: Ø 50 mm x hauteur 160 mm Volume mini / maxi pouvant être dosé : 1 mL/ 500 mL (selon pistons) Cadence maximale: 30 coups /mn. Technical documentation available.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ Bdedpexwva Eefx Ahmeh - E-Screwdrive An inspection can be arranged at any time by appointment.

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 Bdedpfx Ahjvtf Arsmoh little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario Screw Feeder UNIQUICK Feeder Type 360 Plastic sorting bowl, diameter 360 mm Quiet and surface-friendly conveying Optimal screw dimensioning depending on the material being conveyed (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance thanks to amplitude control In a sound-insulated housing on a frame Track width: 20 mm Connector head diameter up to 20 mm Connector length up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Belt Hopper Bucket, chute: stainless steel Belt: white with FDA approval Bdsdpfx Aowbr N Hjhmoh Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a controlled, quiet, and gentle feed of screws and fasteners. UNIQUICK Multi Modularly expandable 3-way diverter Distributes the tested screws to three stationary screwdriving devices Separation Adapted discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Maintenance-free Sound insulation Screw conveying in a plastic bowl Lined with sound-insulating material Airtight blow-in of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Bodpoywkc Rsfx Ahmsdh Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. Bdodpfx Ahoibichsmoh - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2000, Pneumatic clamps to immobilize chairs while the operator performs operations, for example via screwdriver or similar Bdodpfx Ahoydb Hxemjh Working dimensions: cm. 50x60

Condition: excellent (used), ///// PRICE LISTED FOR 1 UNIT ///// For sale: Professional Bosch Rexroth industrial screwdrivers designed for use in production lines and assembly workstations. The devices are characterized by high precision, durability, and the ability for continuous operation in industrial environments (automotive, series production). The items are used. They show normal signs of use but are in good technical condition. ⚙️ Available models (choose one) 🔹 Rexroth ESA075G-G (0 608 841 230) Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESV073-G (0 608 841 247) Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Bjdjyzkhujpfx Ahmedh Country of manufacture: Germany 🔹 Rexroth ESA150S-G (0 608 841 212) Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESA013G-G (0 608 841 225) Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common specifications Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Manufacturer: Bosch Rexroth 📦 Scope of supply ✔️ 1x screwdriver (selected model) ✔️ Head (as per photo – straight or angled) 📊 Condition Used – normal signs of wear. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry series production precision tightening

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Bdodpfx Ahsxmamusmjh Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: ready for operation (used), Stöger 9280 Screwdriving Automation SN: SES003744, used, in good condition, 100% operational, scope of delivery as per photos. Bdodoz Ac Ndopfx Ahmsh

Condition: excellent (used), For sale is a high-quality Milwaukee M18 F2SSBL FUEL cordless snow blower, offered as a showroom model in excellent condition. - The unit was used for in-store display only – no heavy winter operation! - Important: Delivery does NOT include battery or charger (ideal for those already using the Milwaukee M18 system) Highlights: - Powerful brushless POWERSTATE™ motor - Part of the Milwaukee M18 FUEL system (100% compatible) - Clearing width approx. 53 cm – ideal for sidewalks and driveways - Clearing height approx. 30 cm – suitable for deep snow - Throwing distance up to approx. 10 m - Adjustable discharge chute for maximum control - LED headlight for perfect visibility in the dark - Clog-resistant design – no need for tedious post-cleaning - Space-saving vertical storage Advantages: - Quieter and lower maintenance than petrol snow blowers - Zero emissions during operation Bdsdoyvhqijpfx Ahmjh - Instant full power – no starting procedure like with petrol engines - Perfect for homeowners, janitors & commercial use Scope of delivery: - Milwaukee M18 F2SSBL snow blower - WITHOUT battery & charger - Original packaging The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Freight shipment: Austria: €60.00 incl. VAT Germany: €90.00 incl. VAT Related keywords: snow blower, cordless snow blower, Milwaukee M18, snow remover, snow thrower, winter service, driveway clearing, sidewalk snow, janitor equipment, professional snow blower

Year of construction: 2024, condition: new,

Condition: good (used), Cordless angle drill/driver, cordless angle drill, -Manufacturer: Bosch, Cordless drill/driver type GWB 7.2 VE -incl.: charger Bodpfxsw Iftqs Ahmsdh -Quantity: 1x drill/driver available -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For sale: Schtec SMC3500 machining center. Like new, very little used, in excellent condition, complete with all accessories. Package offer: If purchased together with the WM740 welding line and the Pressta double-head screwdriver listed in our other advertisements, the total price is 180,000 EUR. For more information, please feel free to contact us! Bdodjyzihtopfx Ahmsh

Condition: used, CNC Profile Processing Line, consisting of: 1) 1-Axis CNC Cutting Centre – Pertici SC55, Year 2018 The Pertici SC55 is a 1-axis CNC cutting centre designed for the automatic cutting of PVC profiles. Thanks to its automatic loading system, the machine automatically feeds the bars, performs the cutting operations according to the production list, and unloads the finished workpieces. The Pertici software is compatible with the main optimization and production management programs available on the market. The automatic magazine can accommodate up to 10 bars with a maximum length of 6.6 metres. The cutting area is fully enclosed by protective guards, ensuring maximum operator safety and easy maintenance access. The machine is also equipped with an automatic chip and scrap evacuation system, automatic unloading of finished parts, and a collection table with a capacity of up to 12 workpieces. Main Features 1-axis CNC controlled cutting centre Automatic cutting of PVC profiles Automatic loader for up to 10 bars Maximum bar length: 6,600 mm Automatic bar detection system Compatible with the main optimization and production software Automatic unloading of finished parts Automatic chip and scrap extraction Fully enclosed safety guards with front access Collection table for finished parts Cutting Angles The SC55 automatically performs cuts at: 45° 90° Bodpfx Aszg Eggohmodh 135° (Intermediate angles available as an option.) Cutting Capacity SC55 (Ø500 mm saw blade) Maximum profile height at 90°: approx. 155 mm Maximum profile height at 45° / 135°: approx. 155 mm Maximum profile width: approximately 160 mm Minimum workable profile width: approx. 25 mm Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg 2) CNC Machining Centre – Pertici FC1000, Year 2018 The Pertici FC1000 is a high-productivity CNC machining centre for PVC profile processing. It automatically loads, positions, machines and unloads profiles, ensuring fast and efficient production. Equipped with 7 machining spindles and an automatic screwdriving unit, it performs all machining operations in a single cycle. The machine is controlled by Pertici CNC software, compatible with the main production management systems, and features an automatic magazine for up to 10 bars with a maximum length of 6,100 mm, processing profiles from 35 to 130 mm wide. Main Features 7 machining spindles Integrated automatic screwdriving unit Automatic magazine for up to 10 bars Fully automatic loading and unloading Pertici CNC software Automatic profile handling and positioning system Heavy-duty industrial frame Soundproof safety enclosure Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg Maximum bar length: 6,100 mm Profile width: 35–130 mm Available for immediate delivery from October 2026.

Condition: used, Available quantity: 3 units Manufacturer: Cleco Model: 48ESE25D3 Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Application area: Industrial series assembly Drive: electric Use: Controlled screw fastening Bdsdezgf D Eopfx Ahmjh Suitable for: Production and assembly lines Industrial design: yes

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Bdsdeu Imk Repfx Ahmoh Various screwdriver sets. Pliers assortment.

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG Bdodpfx Ajvn U Adohmsh welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Bdsdpfju Imhcjx Ahmjh Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.