Used Darto Gmbh Universal Testing Machine for sale (105,477)

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Hsdpfx Aez An S Rsnysu Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: used, Year of construction: 1995, grinding diameter 350 mm Hsdpsyatx Sefx Anyou grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem

Condition: used, Year of construction: 1995, grinding diameter 350 mm Hodpfey R Ed Aex Anysu grinding length 1000 mm centre height 175 mm Control Kelco 90 weight of the machine ca. 6 t Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis B-Achse stufenlos Schleifscheibendurchmesser links und rechts 400mm Innenschleifeinrichtung Reitstock mit Feinverstellung Sinuslineal am WSS Kel-Set Passive Lämgspositionierung Movomatic TMP91

Condition: used, Year of construction: 1969, x-travel 710 mm y-travel 250 mm z-travel 400 mm table-size 1200 x 300 mm control konventionell tool adaptor SK40 Hjdpsx I Sf Ujfx Anyeu turning speed range 50 - 2500 U/min total power requirement 2,2 kW weight of the machine ca. 1,7 t dimensions 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Hodozy Rruopfx Anyeu Total height: 2000 mm Weight: approx 3,5 T

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Hsdpjzx Ur Nsfx Anyeu

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, table length: 400 mm, table width: 800 mm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Hjdpfezfxubsx Anyou Subject to prior sale and errors.

Condition: used, Year of construction: 1976, Technical details: x-travel: 815 mm y-travel: 400 mm z-travel: 410 mm range of revolution per miute: 67 - 2300 / 8ste U/min feed continuous: 0,04; 0,08; 0,2 mm/U quill stroke vertical: 130 mm spindle taper: SK40 spindle head: drehen: 90° links/rechts spindle head: ausfahrbar: 315 mm spindle head swivable left - right: 40° vor / zurück ° distance spindle nose and table: max. 450 mm distance spindle center to column: min./max.: 170 / 600 mm table surface area: 1120 x 255 mm total power requirement: ca. 1,17 kW Hodpfeu R Uk Rjx Anyeu weight of the machine ca.: 1100 kg machine dimensions LxWxH: ca. 1,7 x 1,6 x 2,2 m dimensions of hydaulic: L: 550 x B: 330 x H: 800 mm Machine table feed 15 - 230 mm/min. via 12 steps Equipment: Sauter workpiece holder with 2 stations (Ø 125 mm and Ø 32 x 26 mm journals), hydraulic operation Coolant system Control panel; hand crank *

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. Hsdpfx Aneyrhb Seyou The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: excellent (used), HEIDENHAIN iTNC 530 HSCI control Hsdozz I Ebopfx Anyju Working travels 875 x 700 x 450 mm A-axis table swivelling +/- 115° C-axis table turnable 360° Spindle taper HSK 63 Spindle speeds 50-20'000 rpm Tool changer 390 positions Robot for workpiece loading GOODJ WHS+ with approx 40 paletts 3D measuring tracer Laser tool setting system Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 Hsdpfjy Ed Ehox Anysu - NC rotary table B-axis

Condition: good (used), A lot of accessories, is only offered completely! Travel X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Weight: approx. 450 kg Machine size W x D x H: approx. 900 x 900 x 1500 mm Accessories: Swivel table Round table Ø 200 mm 6 shots Various collet chucks and clamping devices Horizontal milling device work lamp Hodpfx Anjd Erqbjyou coolant system vice

Condition: good (used), Year of construction: 2023, A pre-owned Optos California ultra-widefield retinal imaging system, acquired in 2024, is supplied in its original Optos transport packaging. The complete system was purchased in 2024. Some individual components may have manufacture or procurement dates from 2023, which is normal for a multi-component system. Configuration: FA Model: California / P200DTx Manufacturer: Optos Condition: Pre-owned – used during a short clinical study The Optos California platform is designed for ultra-widefield retinal imaging and provides up to a 200° field of view in a single capture. This FA configuration supports fluorescein angiography in addition to the retinal imaging modalities available on the California platform. Included configuration: Scan head Touchscreen tablet & stand Image server with monitor Specialized device table OptosAdvance software Color & Red-free imaging Autofluorescence Fluorescein angiography The system is currently securely packed and palletized for transport. The shipment includes the Optos system and associated device table as shown in the image. Hjdpfx Aez Dq Stsnyou Inspection is available by appointment. Worldwide shipping can be arranged.

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min Hjdpfju Ndcmox Anysu revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Hsdpfx Ansyfta Tjyou Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: new, Year of construction: 2026, CORMAK CMS260 Multi-Function Machine The CORMAK CMS260 multi-function machine is an advanced 5-in-1 multifunctional machine combining the functions of a table saw, planer/thicknesser, spindle moulder and drill press. Designed to maximize functionality in a limited workspace, it is an ideal solution for professional woodworking shops, craftsmen and wood processing facilities looking for an efficient, precise and compact machine. Main Advantages of the CORMAK CMS260 5 functions in one machine – table saw, spindle moulder, drill press, planer and thicknesser. Three independent high-power motors – ensure continuous and efficient operation without compromise. Precision cutter block – equipped with three HSS knives, ideal for accurate surface finishing. Aluminium sliding fence – the triangular guide design increases cutting accuracy and repeatability. Saw blade angle adjustment from 0° to 45° – easy adjustment using a handwheel. Compact design – ideal for workshops with limited working space. CE compliance – complete technical and operating documentation (DTR) in Polish. Construction and Technology The CMS260 multi-function machine has been designed as a multifunctional woodworking machine in which the individual working modules operate independently, resulting in greater work efficiency and eliminating the need for additional adjustments. The machine is built on a solid steel base, ensuring stability even during intensive operation. Each function — including the table saw, planer/thicknesser, spindle moulder, etc. — has been optimized for operator safety and ergonomics. Protective guards, folding tables and an efficient dust extraction system all contribute to operator comfort and safety. Precision and Performance Thanks to the use of three separate motors (2.2 kW for the saw and planer, 1.5 kW for the spindle moulder), the machine enables intensive operation without a loss of torque. The spindle moulder offers four spindle speed settings (1,400, 4,000, 6,000 and 9,000 rpm), allowing the operating parameters to be optimally adjusted to the type of material being processed. Standard Equipment 254 mm diameter saw blade Cutter block with three HSS knives Aluminium sliding fence Folding planer tables Folding chip guard, Ø100 mm Optional Equipment Drill chuck (available for PLN 1,490 gross) Technical Specifications Table Saw Maximum saw blade diameter 254 mm Saw blade arbor diameter 30 mm Saw blade speed 4,000 rpm Saw blade tilting angle 0° to 45° Maximum cutting height at 0° to 45° 78 (63) mm Motor power 2.2 kW Power supply 400 V Planer / Thicknesser Cutter block diameter 70 mm Number of knives 3 pcs. Cutter block speed 5,500 rpm Hjdpjv R Td Eofx Anyju Feed rollers 32 mm Maximum planing width 260 mm Maximum planing depth 3 mm Fence tilting angle 0° to 45° Maximum thicknessing width 258 mm Maximum workpiece height in thicknesser mode 225 mm Maximum thicknessing depth 4 mm Feed speed 7 m/min Motor power 2.2 kW Main table size 920 × 410 mm Sliding table 238 × 1320 mm Dust extraction pipe diameter 100 mm Spindle Moulder Spindle diameter 30 mm Spindle speed 1,400 / 4,000 / 6,000 / 9,000 rpm Spindle clamping length 105 mm Maximum spindle travel 110 mm Maximum table opening 160 mm Motor power 1.5 kW

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Hedpfx Ansziz S Deyeu Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Milling Spindle: Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Equipment & Features: Hedpjyh Nm Sefx Anyou High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: used, Year of construction: 2010, Milling machine, manufacturer Knuth, model UFM 3 Plus. Digital display, numerous accessories included. Hjdpsz Aff Usfx Anyju

Condition: good (used), Year of construction: 1999, functionality: fully functional, controller manufacturer: Heidenhain, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DMG DMU 50 evo Year of manufacture: 1999 Heidenhain TNC 430 control 30-tool changer, SK40 Internal coolant system Hodsz E A R Rspfx Anyeu Chip conveyor

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 140569, Table: 600 x 300 mm Hedpjzvqnnsfx Anyou Travel ranges X / Y / Z: 400 / 300 / 350 mm Spindle mount: SK 40 Spindle speeds: 50 - 2500 rpm Drive power: 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, HEIDENHAIN for X Y Z Weight: 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Operating manual in German

Condition: good (used), Year of construction: 1990, 1 used, well-maintained CNC tool milling machine, traveling column design, with CNC path control GRUNDIG Dialog 11 Table size 1600 x 675 mm Tool holder SK / ISO 40 Travel distances X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load 2000 kg Spindle speed range 20 – 6300 rpm Feed rate range, stepless 2 – 10,000 mm/min Rapid traverse in all axes 10 m/min Quill stroke 80 mm Drive power 100% ED 7.5 kW 40% ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Hodehhuf Hepfx Anysu Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Control cabinet weight 470 kg Accessories / Special features: • CNC tool milling machine suitable for tool and fixture manufacturing, training, and mold making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets, even with islands, shifting and rotation of the coordinate system • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling attachment • Full protection enclosure • Ball screw spindles in all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hjdpoy U N Hiefx Anyeu Hydraulic preparation for arobo bezel

Condition: as good as new (ex-display), Year of construction: 2003, functionality: fully functional, workpiece height (max.): 1,250 mm, workpiece diameter (max.): 1,950 mm, THE TURNMILL. BUILT IN THE EARLY 2000’S WELL IN ADVANCE AT THAT TIME. COPIED BY SEVERAL MANUFACTURERS SINCE. THIS IS THE ACTUAL DEMONSTRATION MACHINE USED IN HOUSE FOR THE COMPONENTS SEEN IN THE PHOTOGRAPHS THE TURNMILL IS A WONDERFULLY VERSATILE TURNING, MILLING AND GRINDING MACHINE WITHIN ITS CAPACITIES Swing 1950mm; turning 1500mm; workpiece height 1250mm; table speeds to 630rpm Condition perfect. Equipment extensive. Value for money - impressive Hjdpfx Aney Uxv Tjyeu

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm Hedpsw Rktbofx Anyeu *