Used Datacon 2200 Evo Gen 3 Assembling Machine for sale (117,307)

Year of construction: 2005, condition: used, Chamber spray cleaning system Pgedjz E I Syjpfx Ai Tou Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 HSCI Speed : 10000 rpm Movement X/Y/Z : 1050/530/630 mm Tool holder : SK40 General: Tool magazine:24 stations Rapid traverse X/Y/Z:24 m/min Machine weight:7,800 kg Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK40 Fluid delivery:Blow air through the spindle + cooling lubricant through the spindle (IKZ) Work table: Work surface:1,150 x 560 mm Table load capacity (max.):700 kg Travel ranges X/Y/Z:1,050 x 530 x 630 mm Features/Accessories: Chip Management:Chip Conveyor Cooling Management:IKZ System Setup Mode:Electronic Handwheel Pgsdpfx Aisz R Icws Tju Probe:Tool Probe (Hexagon)

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display Pjdoxacfgopfx Ai Tjgu - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, Year of construction: 2010, The machine has recently undergone service. Machine may need following repairs: A damaged guide rail clamping the PCB was observed. Transport belts are in poor condition. Mirrors in the camera module need to be cleaned before calibration. Software version Si 8.60 may require an update. Podpfex Tv Rxjx Ai Tegu Otherwise it is operational.

Condition: new, sheet width 1000 mm plate thickness 3,3 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,39 t Pgjdpfx Aisrb Hcfe Teu dimensions of the machine ca. 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V

Condition: used, Year of construction: 2018, Used, working condition unit. Additional details including pricing upon request. Pgedpez Hlhhefx Ai Tsu

Condition: ready for operation (used), * Brand: Metso Pgedpoywm Nyjfx Ai Tju * Screen surface: 4000 x 1500 mm - 3 Decks * Driving: 15 kW E-motor

Condition: ready for operation (used), * Brand: Kleemann Pgjdpsywm Tfofx Ai Tju * Surface: length 6500 mm, width 2000 mm - 3 decks * Driving: 22 kW e-motor * Incl.: springs.

Condition: used, Year of construction: 2012, First Article Inspection of PCB Assemblies. Psdpfezhlbysx Ai Tjgu Total of 2 units available.

Condition: good (used), Year of construction: 2007, operating hours: 7,276 h, 3 row machine for 75 cm Hours: 7300 hours Pgsdpfx Asz Rb U Hji Tju 6 arm picking heads Leaf rollers Blind feeding Unloading belt on the bunker Large undercarriage. High reliable and durable Air-cooled 6-cylinder Deutz engine Heating works well Windows and tarpaulin good Caterpillar 60 cm wide Radio + camera The Tumoba SP3 are harvesters designed to enable larger sprout growers to achieve high production and minimise labour requirements, while protecting the condition of the soil even in the most adverse conditions. The operators sit at the front of the machine, one for each row to be harvested. In front of each row is a foot-operated arm with a stem cutter attached. As the machine passes through the crop, the stalks are cut and fed by hand into the cutting heads next to each operator. The buds and leaves are stripped and separated from the stem, the leaves return to the ground and the cut buds are fed through an elevator into a bulk hopper in the centre of the machine. Each model is built on a tracked chassis and powered by a diesel engine mounted at the rear of the machine and hydraulically driven. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, The ST-1400 universal manual pallet dismantling table is the simplest and most affordable version of a pallet dismantling station, designed for start-up companies or small manufacturers who do not yet require automation. Psdpfx Aozgc R Asi Tsgu It is a fully manual workbench with manually extendable "combs" for supporting and positioning the horizontal boards. It allows working with pallets with a maximum length of 1400 mm and a working height of up to 1200 mm. Unlike more advanced systems, the Pneumatico ST-1400 does not have pneumatics or automatic clamping devices – all operations are performed manually, which significantly reduces the purchase and maintenance costs, but at the same time means a basic level of equipment, simpler than semi-automatic industrial tables. This solution is particularly well-suited for the production of disposable pallets and for less demanding customers, where low production costs and fast, uncomplicated production are key. It is an ideal choice for small workshops and small-batch production, where simplicity, flexibility, and low initial investment are important.

Condition: new, Rollmak 3-roll round bending machine SM 90-10/3.3 Technical specifications: Sheet width 1050 mm Sheet thickness 3.3 mm max. sheet thickness 3.0 mm Roll length 1050 mm roller diameter 90 mm smallest bending diameter 130 mm Weight 440 kg Dimension L-W-H 1650 x 700 x 1160 mm Motor:1,1 KW Equipment: Top and bottom roller electrically driven Swing-out top roller Rear roller infeed with handwheel Conical bending device Asymmetrical roller arrangement Self-braking main motor Separate control panel Pgjdpjtzll Eefx Ai Tju safety line Values apply to St-37 / 240 N/mm² CE mark

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW Pgedoztfxiepfx Ai Tou weight of the machine ca. 2 t

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Pedpfxsvpdhxo Ai Tegu Specifications see attached PDF. Leasing possible. (All prices are NET)

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2200 € 1 1050 mm 2 mm 75 mm 1930 mm Pgedpfx Aiswiquqj Teu 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. Pgodpfx Aoztckioi Tju The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2022, 3-row, in staggered arrangement8 clamping spoons per elementRow spacing minimum 32,5 cm Current row spacing 52,5 cm Plant grippers spaced 32.5 cm apart More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Pedpfxez Rfhkj Ai Togu The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2026, The ST-1900 universal semi-automatic pallet assembly table is a simple and cost-effective version of a semi-automatic production station, designed for companies that want to achieve a higher level of efficiency while maintaining low investment costs. The table is equipped with a pneumatic pallet lifting system and pneumatic combs for positioning the horizontal boards, which significantly simplifies and speeds up the operator's work. By maintaining a simple and uncomplicated table design, manual effort is reduced and the ergonomics of the workstation are improved. Pgsdpfx Aiezgc Smo Tju Despite the use of pneumatics, the Pneumatico ST-1900 remains a device in the basic segment – it is an economical solution for small and medium-sized manufacturers who need to increase production repeatability and speed. The table allows for flexible work with popular pallet formats and is suitable for both the production of disposable pallets and standard pallet designs for less demanding customers.

Condition: excellent (used), functionality: fully functional, 3-axis machining center Pgjdpozcpfajfx Ai Teu Work area: 1350 x 2565 mm. Workpiece clamping via vacuum pump.

Condition: used, Year of construction: 2004, Feeder slots in front 40pcs. Back side feeder slots 10pcs and tray solution up to 20 pcs of component trays. Feeders included: o 6 pcs 8mm tape feeders o 18 pcs 12mm tape feeders o 16 pcs 16mm tape feeders o 7 pcs 24mm tape feeders o 3 pcs 32mm tape feeders o 4 pcs 44mm tape feeders Pgodpfx Aozf H Snoi Tsu o 1 pc 56mm tape feeders

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet Podowkvi Nspfx Ai Tsgu - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: new, sheet width 1000 mm Pgodorb Hcbjpfx Ai Tju plate thickness 3,3 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,445 t dimensions of the machine ca. 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 1000 x 3 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, warranty duration: 12 months, total height: 730 mm, total length: 1,115 mm, total width: 490 mm, overall weight: 50 kg, Machine for mini donuts, made of stainless steel materials according to AISI 304, according to the regulatory documents for the food industry. Pgjdpewp Il Hofx Ai Tsu Automatic dosing, turning and removal of the donuts from the fryer. Electronic counter Easy to service.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, 3 Tone Horizontal Balancing Machine Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in) Podpfx Aior Dd Ave Tsgu

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Type: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: used, from a training workshop, cleaned and operational, ready for demonstration Spindle hours: 2,542 hours X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 - 4,500 rpm Feed rates: 0 - 2000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1920 kg Space requirement: approximately 2000 x 2000 x 2100 mm Total power consumption: approximately 7 kVA Pgedozza Smepfx Ai Tou Central lubrication system Coolant system CE compliant Scope of delivery: – Technical documentation – Full protection enclosure – LED machine light