Used Delta Sg.0.Dts.10002 for sale (89,528)

Condition: new, machine/vehicle number: f8fb99947a1c19bc4d63549ff, empty load weight: 6 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of front lashing eyes recessed on offset, 5 tons each 7 pairs of lashing rings at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion with M&S marking Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp safety device hinged at the bottom (to prevent the ramps from slipping sideways, not in conjunction with hydraulic side ramp displacement) covered with wood Gsdpfx Asi Riwfjlxoub with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Coun

Condition: ready for operation (used), Presser / bander delivery Guodjxnd Ulspfx Alxsb

Condition: ready for operation (used), Siemens 6FC3641-0AX SINUMERIK PRIMO SG complete control unit SN:A1495045, used, normal signs of use, 100% functional, scope of delivery as per photos Guedpfjn Emz Ijx Alxsb

Condition: ready for operation (used), Bosch SG-y1.016.060-00.010 AC servo motor SN:N445, used, normal signs of use, 100% functional, scope of delivery as per photos Godpfstu R Idsx Alxjub

Condition: excellent (used), Year of construction: 2023, Schulz Schulz Electronic Power Test Cabinet with 8× Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. This system comes from a professional laboratory environment and is ideal for development, testing, burn-in, and automated test processes. Features & Functions: - 8 × independently usable laboratory power supplies SM330-AR-22 - Each unit offers precise voltage and current regulation - Sequence/automatic mode for complex test routines - Large control cabinet with: • Main switch • Start/Stop • Emergency stop • Side panels with optimal ventilation • Casters for easy transportation - Network labels present (e.g., CTSK05 #01 172.25.108.201) Technical Data: Control Cabinet (SE6607X-23BA0065-1): - Input: 400 VAC (three-phase) - Maximum current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection rating: IP20 Power Supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A - High-resolution display - Fully programmable Guodpfxjx Eb Hae Alxeb - Industrial grade – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, controls clean, cabinet is solid. No visible damage. Scope of delivery: (see picture) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operation section - Casters mounted (Technical specifications and details are subject to change and error!) If you have any further questions, we will gladly assist you by phone.

Condition: excellent (used), Year of construction: 2013, CNC gantry milling machine with 18 m travel! • Table size: 18,000 x 2,800 mm • Distance between columns: 3,650 mm • Max. table load: 3,000 kg/m² • Travel X-axis: 18,000 mm • Travel Y-axis: 3,600 mm • Travel Z-axis: 1,600 mm • Max./min. distance table / spindle: 2,496 / 896 mm • Spindle taper: BT50 • Max. spindle speed: 6,000 rpm • Spindle drive: 26 kW • Max. tool length: 350 mm • Tool magazine: 32 positions • Max. tool diameter: 220 mm • Max. tool weight: 18 kg • Machine dimensions (L x W x H): 26.6 x 7.8 x 7.2 m • Control system: FANUC OiMD + 8.4’’ LCD Accessories: • Various angle heads Chip conveyor Very little used machine! Gujdpfox Imaaox Alxob

Condition: ready for operation (used), Delta Elektronika SM 15-200 D power supply, used, in good condition, 100% functional, delivery contents as per photos Gusdpfx Alsx Eq Hfexsb

Condition: new, Boring power 35 mm turning speeds max. 810 U/min core drilling diameter max. 35 mm tool taper Weldon 19,05 mm bore stroke 210 mm weight 11 kg connected load frequency 230 V engine output 1,6 kW Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg Gujdpfx Aleidabvjxob

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Gujdpfew Am Nqox Alxob Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Year of construction: 2013, condition: as good as new (ex-display), PSS SG-200 meat grinder year mod 2013. Associated tool trolley with accessories & extra feed screw. Capacity 4000-8000 kg / hour. Extra magazine for product and swing arm for easier installation of screws. Dimensions 270 x 165 cm H 220 cm. Gusdpfx Aleifpkbexsb

Condition: used, Working direction: left-right Amount of capping heads: 6 Gjdpfjxytvcsx Alxoub

Condition: used, Speed: ca 15.000 bph for winecork turning left-right Gjdpfsxytuxjx Alxeub

Condition: used, Year of construction: 2022, Side plates Working width 3.0 m Transport width 3.0 m Rear scraper / prism roller Ø 45 cm with rigid three-point tower Working width 2.9 m / transport width 3.0 m Tine attachment 3.0 m 3-beam, rigid, line spacing approx. 15 / cm, complete with long Gedpfx Alst Dv N Texjub

Condition: used, Year of construction: 1993, sheet width 1550 mm Godpfx Asvh Ndpelxjub plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: used, Year of construction: 1988, sheet width 3000 mm plate thickness 6 mm distance between columns 3100 mm cutting angle 1°15´ no. of strokes 16 Hub/min down holder 16 Stück back stop - adjustable 750 mm total power requirement 11 kW weight of the machine ca. 5,7 t dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m Gujdpfxsvh Ivko Alxob Accessories: electr. back stop with DRO ELGO electric, angle front stop

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] Gjdpswizt Defx Alxeub - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] - Number of working hours : 11500 [h] EQUIPMENT - CNC : Fanuc Oi TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank - Bar loader : Tornos SBF 320 - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] Godpeuha Tvjfx Alxjub - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] MACHINE HOURS - Number of working hours : 21523 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Predisposition for barfeeder - Bar loader : fedek - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION Gedpfxewizt Rj Alxjub - Number of positions : 7 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] - Number of working hours : 10800 [h] EQUIPMENT - CNC : Fanuc Oi TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank - Bar loader : Tornos SBF 320 - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 Guodswttdcspfx Alxsb MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] EQUIPMENT - CNC : Fanuc Oi TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank - Bar loader : Tornos SBF 320

Year of construction: 2003, condition: good (used), Product Description:  Web width: max. 10 inch – 254mm  1x die cutting unit  1 x inking unit UV Flexo 1-color with corona and dust removal  1 set of impression cylinders  Unwinding 850mm  Winding on large roll and small roll possible  Ran all the time only in single-shift operation. Machine Specifications and Equipment: _____ Accessories Included: Gedpfx Aov Ubfxolxoub  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 1995, condition: used, x-travel 5500 mm y-travel 2750 mm Gujdpfet Hwp Hsx Alxjb z-travel 1500 mm total power requirement kW weight of the machine ca. 20 t dimensions of the machine ca. 8x4,5x4,2 m Measuring column, longitudinal movement, X Axis 5,500 mm Measuring slide, cross, as Y Axis (measuring head) 2,750 mm Measuring slide, vertical, as Z Axis (vertical) 1,000 mm Adjustment of measuring head, roll axis 360 ° Measuring table 5,000 x 2,500 x 350 mm Weight, approx. 20,000 kg Space required 8,000 x 4,500 x 4,200 mm Accessories / Special Features : o RENISHAW 3D probe head with rotating-tilting device, operating depending on orientation. o Universal 3D Measuring Software, CHOROS Version 5.2 with DEC Software, OPEN VMS Alpha ADL, Version 6.1 with various additional SEC Software, OVMS Base, NAS 150, Cluster, OPEN 3 D, Version 2.5, etc. for manual or automatic measuring of ruled geometry and freeform surfaces, ideally on auto bodies, machine tool parts and forming tools. o ALPHA Programming Station with hard drive, disk drive, printer and a mobile manual control panel. o Steel clamping table, which can be levelled, 2,500 x 5,000 mm. o Machine was maintained annually by DEA Company. Condition : Very good. Machine is on stock but not yet assembled. Stable, heavy duty design for high precision measurements. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of measuring machines on stock.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 286964, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 5,000 kg, controller model: MAZATROL SMOOTH C, Equipment: chip conveyor, The payment deadline for the machine is 04.12.2025! Placing a bid obligates the buyer to collect the machine within the specified timeframe between 10.12.2025 and 12.12.2025! Guodpexvbdgjfx Alxob The machine can be inspected on 25.11.2025! TECHNICAL DETAILS Travel Distance X-Axis: 200 mm Travel Distance Z-Axis: 300 mm Control System: MAZATROL SMOOTH C MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,500 x 2,000 mm Total Weight: 5,000 kg Electrical Data Operating Voltage: 400 V Frequency: 50-60 Hz Rated Current: 46 A Connection Load: 26.1 kVA EQUIPMENT 12-position tool turret Three-jaw chuck (diameter: 160 mm) Sorting unit with vibratory head from manufacturer GRIMM Chip conveyor Cooling system

Year of construction: 2006, condition: good (used), machine/vehicle number: 1452, Control panel with display Godpfx Aljk Izqtsxeub

Condition: excellent (used), Year of construction: 2006, Palamides Delta 502 banding delivery for folding machines year 2006 Godpoxvygyefx Alxjub in good condition

Condition: used, Year of construction: 1995, Used Capping Machine Bertolaso DELTA 509 R 9 heads 14500 bph Straight Cork Caps diameter: 22-26 mm Caps height: 35-50 mm Gusdpfsvguw Ejx Alxeb Production for straight cork 3500-14500 bph Bottles: Diameter from 50-140mm Tolerance on diameter 2 mm Height from 180-370 mm Height tolerance 10 mm