Used Diethei Md 50 D(Igital) for sale (69,327)

Condition: used, Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Redpfx Aexiv Rnommou Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW  Abmessungen / Dimensions 200 x 80 x 150 cm  Gewicht / Weight 730 kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2019, Mist extractor Redpfxstu Uxro Ammsu

Condition: good (used), Year of construction: 2005, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 13 rpm i= 1/100 -Manufacturer engine: Carpanelli type M63C4 Rjdpfel Tuu Sjx Ammou -Power: 0.25 kW / 1340 rpm -Hollow shaft: Ø 24 x 100 mm -Quantity: 4x geared motor available -Price: per piece -Dimensions: 210/140/H350 mm -Weight: 8.7 kg/pc.

Year of construction: 2005, condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D Rodpfspbig Hjx Ammju -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Shaft: Ø 24 x 90 mm -Dimensions: 210/215/H345 mm -Weight: 10 kg

Year of construction: 2005, condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D Rsdpfeqcy Aijx Ammsu -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Hollow shaft: Ø 24 x 100 mm -Quantity: 2x geared motor available -Price per piece -Dimensions: 200/140/H355 mm -Weight: 8.2 kg/pc.

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer Rodpfxsgqg Hfe Ammsu -Type: 6 D 150/50-18 -Number: 2 pieces available -Price: per piece -Dimensions: 130/120/H190 mm -Weight: 8.8 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage Rodpfx Amsb R Ac Usmsu -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 130/50-10 -Number: 4 pieces available -Price: per piece -Dimensions: 110/105/H145 mm -Weight: 6,0 kg Rjdpfx Ajgqg H Uemmju

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394W01769, Year of construction: 2008, operating hours: 13,420 h, load capacity: 5,000 kg, lifting height: 4,240 mm, mast type: duplex, fork length: 1,200 mm, fork width: 1,000 mm, TECHNICAL DETAILS Lifting capacity: 5,000 kg Lift height: 4,240 mm Clearance height: 3,180 mm Mast: Duplex Fork length: 1,200 mm Maximum fork width: 1,000 mm Minimum fork width: 350 mm MACHINE DETAILS Number of wheels: 4 Fuel type: Diesel Dimensions & Weight Transport dimensions: 3,000 mm x 1,500 mm x 3,180 mm Transport weight: 6,760 kg Operating hours: 13,420 h EQUIPMENT Redpfx Aox Rba Tjmmeu 4th valve for fork carriage Sideshift Heater Work lights Half cabin CE marking Documentation

Condition: good (used), Year of construction: 2011, Temperature control unit, heating system, hot water boiler, hydronic system, hydraulic station for high-pressure cleaner, high-pressure pump -Temperature control units for: water -Electric heating for: pressure washers, high-pressure pumps Redpfxjqw D Dpo Ammou -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -Permissible operating overpressure: 6 bar -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Sempress type: ADO-MAEFlange: Ø 40 mm -Thread: M16 x 1.5 -Stroke: 980 mm Rodpfx Asd Nn Idjmmsu -Dimensions: 1180/65/65 mm -Weight: 8.1 kg

Condition: new, table diameter 1500 mm table load 5000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1300 - 2050 mm max. torque on the faceplate 10000 Nm engine output 1,5 / 1,5 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. Rsdpfx Amsfv Ay Dsmeu The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 1500 mm table load 5 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 10000 Nm 0 1,5 / 1,5 kW welding current 700 Ampere Rjdpefv Ax Ujfx Ammju • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1400 mm table load 5 t swivelling range 0 - 135 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1100 bis 1950 mm max. torque on the faceplate 7000 Nm welding current 700 Ampere Rjdpfxofv Azdj Ammju including remote control and welding current transmission.

Condition: used, mileage: 1,001 km, gearing type: automatic, fuel type: diesel, color: red, empty load weight: 14,500 kg, axle configuration: 4x2, first registration: 01/1981, Year of construction: 1981, driver cabin: other, Vehicle location: Bovenden, automatic Body: Load capacity approx. 4,000 kg 6 cylinder Deutz diesel, lifting height 2,750 mm, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Rodpfx Aep N Dayjmmeu

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg Redpfx Ameq Ev R Sjmou - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. Rjdpfxszaavke Ammsu The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. Rodpfx Amozaat Aomeu With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Rjdpfx Amey Umklemeu We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), functionality: fully functional, machine/vehicle number: G1850438, operating hours: 675 h, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 220 V, input current: 7 A, table width: 390 mm, table length: 490 mm, Stratasys J850 Digital Anatomy – professional PolyJet 3D printer for medical and anatomical models For sale is a Stratasys J850 Digital Anatomy, a high-quality industrial PolyJet 3D printer for realistic medical, anatomical, and functional models. This machine is ideally suited for clinics, medical device companies, research institutions, universities, dental/medical laboratories, and service providers in the field of 3D printing and prototyping. The J850 Digital Anatomy enables the printing of complex models with multiple materials, colors, and Shore hardness values in a single print job. This makes it possible to represent anatomical structures such as bones, vessels, tissues, organs, and transparent areas in a particularly realistic manner. Typical applications include surgical planning, training, demonstration models, product development in the medical technology sector, and patient-specific models. Technical specifications / Additional information: Total printing time: 675 hours Technology: PolyJet / Multi-material 3D printing Layer thickness: up to 14 µm Multi-material printing with up to 7 base materials Full-color and transparent printing possible Software: GrabCAD Print / GrabCAD Voxel Print Network connection: LAN / TCP-IP Suitable for Digital Anatomy materials such as TissueMatrix, BoneMatrix, GelMatrix, and other PolyJet materials Condition / Storage notes: The machine is currently disassembled. Before disassembly, it was professionally flushed by Stratasys to prevent clogging or drying out of the print heads. As a result, the machine is properly prepared for transport or storage. Special features: Realistic haptics and appearance of anatomical models Very high level of detail and fine surface quality Rodpfxjy Urwwj Ammeu Printing of flexible, rigid, transparent, and colored areas in a single model Ideal for medical training, surgical preparation, and product development Industrial Stratasys quality Large build volume for complex models and small production runs Professionally flushed and prepared for transport/storage This machine is particularly interesting for users who want to produce high-quality medical models, demonstrators, implant/instrument prototypes, or realistic training models. Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with the exclusion of any liability for defects/warranty. No guarantee is provided. Errors and prior sale excepted. Inspection possible by appointment. Sale is ex-works.

Condition: excellent (used), Year of construction: 2002, Weishaupt gas burner G7/1-D, with gas line Dungs DN 50 Design: ZMD-LN Output: 250-1550 kW Connection pressure: 15-500 mbar Year of manufacture: 2002 Rjdpfx Asy Uvt Nsmmeu

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Redporivv Esfx Ammou Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 1097415, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 318 kg, overall weight: 6,350 kg, table width: 508 mm, spindle speed (min.): 10,000 rpm, table height: 324 mm, Technical Data BRAND: Haas MODEL: MDC-500 SERIAL NUMBER: 1097415 Year: 2012 Numerical Control: Haas Location: Tabaza (Asturias- Spain) TABLE DIMENSIONS Table surface: 508x324 mm. Number of tables: 2 Maximum weight on the table: 318 kg. RANGE Longitudinal travel X: 508 mm. Transversal travel Y: 356 mm. Vertical travel Z: 508mm. SPINDLE Cone: BT40 Spindle speed: 10.000 r.p.m. 22.4 Kw 122 Nm ATC Capacity: 24 Station Tool change time: 4.8s ADVANCES Working feeds: 21.2 m/min Rapid feeds: 25.4 m/min WEIGHT AND DIMENSIONS Machine dimensions: 3.632x3.404x2.870 mm. Redpfetr Uflex Ammeu Machine weight: 6.350Kg. ACCESSORIES Programmable coolant Chip conveyor Renishaw T527R probe

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 Rjdpoyycwrjfx Ammeu weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, number 1x Rsdpfjyycwlox Ammou tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm