Used Dimter 10 T for sale (85,609)

Condition: used, Year of construction: 2006, X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible. Tjdpozuz Aajfx Antob

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Gross weighing and bagging system for 10-25kg sacks or buckets (5kg would also be adjustable). Has only been used for a test run and is otherwise unused. Todpfx Aszp Na Nsntob

Condition: good (used), Year of construction: 2009, ENGEL Emotion 440/100T Clamping force: 1000 kN Opening stroke: 400 mm Ejector stroke: 130 mm Ejector force: 37 kN Tsdpfx Asyktp Sjntsb Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Nozzle contact force: 40 kN

Condition: new, empty load weight: 1,021 kg, maximum load weight: 2,479 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,500 mm, loading space width: 2,240 mm, color: black, construction height: 1,000 mm, working width: 2,320 mm, Comfort package: Aluminum rims / sloping rear / single ramps / perforated lashing floor / floor storage box, hydraulics, automatic reversing, drive-on ramp, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Comfort package: Aluminum rims / sloping rear / single ramps / perforated lashing floor / floor storage box Technical data: - Make: Brian James - Model: T Transporter 231 - Vehicle type: Car transporter - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 550 x 224 x 0 cm - External dimensions (L x W x H): 710 x 232 x 100 cm - Loading height of floor: 59 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,021 kg - Payload: 2,479 kg - Chassis: High loader (wheels under the body) - Tires: 195/55R10C aluminum rim - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100km/h approval: Optional, can be retrofitted DESCRIPTION - Original aluminum rims 10-4.5J, anthracite - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Additionally sloped rear ensures a particularly low drive-on angle - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, etc. Can be retrofitted at any time - Very sturdy welded steel frame - Storage compartments embedded in the loading area for drive-on ramps at the rear - 2x perforated steel ramps, galvanized steel, 2.35 m long - Loading area, Front wooden floor (instead of ramp shafts at the front) - Sliding contact edge for drive-on ramps for different track widths - Lockable floor storage box with spring-loaded lid - Perforated galvanized steel lanes - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Side panels color: black - Additional lashing options thanks to side railing - Removable railing all round: The multi-part side profile railing offers numerous lashing points and is removable so that wider loads can be transported. - Frame completely hot-dip galvanized - Spare wheel mounted on the drawbar for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Tsdpfxju Ht Sxe Antsb

Condition: new, empty load weight: 1,036 kg, maximum load weight: 2,464 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,500 mm, loading space width: 2,240 mm, color: black, construction height: 1,000 mm, working width: 2,320 mm, quenched rear / aluminium rims / ramps 2, comfort package, hydraulics, automatic reversing, drive-on ramp, hot-dip galvanizing, 35M / tiltable, * IMMEDIATELY AVAILABLE * incl. quenched rear / aluminum rims / ramps 2.35M / tiltable Technical data: - Make: Brian James - Model: T Transporter 231 - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 550 x 224 x 0 cm - External dimensions (L x W x H): 710 x 232 x 100 cm - Loading height of the floor: 59 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,036 kg - Payload: 2,464 kg - Chassis: High loader (wheels under the body) - Tires: 195/55R10C aluminum rim - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100km/h approval: Optional, can be retrofitted DESCRIPTION - Original aluminum rims 10-4.5J, anthracite - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Additionally sloped rear ensures a particularly low drive-on angle - Vehicle also intended for all options after purchase: enormous potential for retrofitting: winches, other ramps, etc. Can be retrofitted at any time - Very sturdy welded steel frame - Storage compartments embedded in the loading area for drive-on ramps at the rear - 2x perforated steel ramps, galvanized steel, 2.35 m long - Loading area, front wooden floor (instead of ramp shafts at the front) - Sliding contact edge for drive-on ramps for different track widths - Hydraulic tipping function (hand pump) incl. cylinder, for very flat drive-on ramps. Hydraulic tipping function (hand pump incl. cylinder, for very flat drive-on angle - Lockable floor storage box with spring-loaded lid - Hole pattern of galvanized steel lanes - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Side panels color: black - Additional lashing options thanks to side railing - Removable railing all round: The multi-part side profile railing offers numerous lashing points and is removable so that wider loads can be transported. - Frame completely hot-dip galvanized - Spare wheel mounted on the drawbar for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Tjdeu Ht S Sspfx Antjb

Condition: excellent (used), functionality: fully functional, Manufacturer: Šmeral Type of machine: Hot forging press Rated pressing force: 1,000 t Tjdszxhzwepfx Antjb Ram stroke: 220 mm Stroke rate: 100 strokes/min Table size: 995 × 950 mm Ram adjustment: 10 mm Stroke of upper ejector: 35 mm Drive power: 40 kW Weight: approx. 45 t

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Cutting with: 130 mm Power: 5,1 kW Tedpfx Anogixvwjtob Weigth: 1260 kg

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 138800 € 2623.32 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 MK 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18.5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) Tsdpfxswiq Drj Antob 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: FANUC, controller model: Fanuc 310, This 4-axis DMG Gildemeister SPEED 32/10 linear was manufactured in 2008. It features a CNC Fanuc 310iS control, a main spindle with a bar capacity of 33 mm, and a maximum speed of 8,000 rpm. The machine offers robust multitasking capabilities with a total of 16 driven tool stations and a turret for efficient processing. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister SPEED 32/10 machine we have for sale. Contact us for more information. • CNC: Fanuc 310iS • Panel type: SlimLine • Screen: 15" TFT Color • Controlled spindles (including C axes): 2 • Controlled axes: 8 • Channels: 3 • Bar capacity: 33 mm (36 mm max) • Draw tube inner diameter: 46 mm • Maximum speed: 8000 rpm • Nominal torque (S1): 24 Nm • Nominal power (S1): 5.5 kW • Draw tube inner diameter: 38 mm • Maximum speed: 8000 rpm • Nominal torque (S1): 9.4 Nm • Nominal power (S1): 3.7 kW • Axis X1 • Travel: 50 mm • Maximum speed: 40 m/min • Maximum acceleration: 10 m/s² • Nominal thrust (S1): 1200 NAxis Y1 • Travel: 350 mm • Maximum speed: 30 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 5000 NAxis Z1 • Travel: 320 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NAxis X2 • Travel: 310 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NAxis Z2 • Travel: 320 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NAxis X3 • Travel: 80 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 1200 NAxis Y3 • Travel: 60 mm (±30 mm) • Maximum speed: 18 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 5000 NAxis Z3 • Travel: 150 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NTurret • Total stations: 16 • Fixed external tools: 8 • Tool shank size: 16×16 mm • Driven tool stations: 16 • Collet type: ESX/ER 20 • Maximum driven speed: 5000 rpm • Nominal torque (S1): 4.8 Nm Todpfx Anjzvvp Rstob • Nominal power (S1): 1.5 kWToolsToolholder Slide 1 • Total stations: 10 • Fixed external tools: 6 • Tool shank size: 16×16 mm • Driven tools: 4 • Collet type: ESX/ER 20 • Maximum driven speed (GEO 7–9): 5000 rpm • Nominal torque (S1): 2.19 Nm • Nominal power (S1): 0.55 kW • Secondary driven speed (GEO 8–10): 3333 rpm • Nominal torque (S1): 3.28 Nm • Nominal power (S1): 0.55 kWBack Working Slide • Total stations: 4 + 2 • Internal fixed tools: 3 • Toolholder diameter: 25 mm • External fixed tools: 1 • Driven stations: 2 • Collet type: ESX/ER 16 • Maximum driven speed: 6000 rpm • Nominal torque (S1): 1.75 Nm • Nominal power (S1): 0.55 kWMediaLubrication System • Tank capacity: 2.9 L • Operating pressure: 30 bar • Stop time: 7 minutes • Operating cycle time: 30 seconds • Lubricant type: Castrol Magna BD 68Pneumatic System • Minimum operating pressure: 5 bar • Maximum operating pressure: 6 bar • Consumption: 60 NL/min

Condition: new, Year of construction: 2024, Welding positioner Protec KT 10 000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Tilting range from 0 to 130° Todpfx Ask S D N Eentjb Dimensions: minimum height when tilted: 1080mm maximum height when tilted: 2200mm minimum height in horizontal position: 1400mm diameter of the clamping plate: 2000mm length: 3250mm, width: 1780mm speed from 0.05 to approximately 0.6 RPM.

Condition: used, Year of construction: 1999, operating hours: 4,760 h, load capacity: 3,000 kg, lifting height: 10,000 mm, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, * Samborn T30110 Telescopic forklift * Year of manufacture: 1999 * Operating hours: 4,760 h * Quick coupler * 1 x load hook * 4x4x4 all-wheel drive / all-wheel steering * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale. Tsdpfx Ajzwkndsnteb

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Tjdpfezxcmuex Anteb Number of work stations: 1 Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair.

Condition: new, Year of construction: 2022, Protec Welding Positioner – 10,000 kg load capacity Steplessly adjustable speed: 0.05 – 0.5 RPM Handheld and foot-operated remote control Tjdpfx Ansd An Aiotob Height: 650 mm Diameter: 1800 mm

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Todpfx Aneymf Skstsb Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm Tjdpfx Anjd Ha E Sjtsb

Condition: new, empty load weight: 1,093 kg, maximum load weight: 2,407 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,500 mm, loading space width: 2,240 mm, color: black, construction height: 1,000 mm, working width: 2,320 mm, Comfort package: Electrically tiltable / electric winch / aluminium rims / sloping rear / continuous ramp / perforated lashing floor / electric wheel / floor dust box, hydraulics, automatic reverse, drive-on ramp, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Comfort package: Electrically tiltable / electric winch / aluminium rims / sloping rear / continuous ramp / perforated lashing floor / electric wheel / floor dust box Technical data: - Make: Brian James - Model: T Transporter 231 - Vehicle type: Car transporter - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 550 x 224 x 0 cm - External dimensions (LxWxH): 710 x 232 x 100 cm - Loading height of floor: 59 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,093 kg - Payload: 2,407 kg - Chassis: High loader (wheels under the body) - Tires: 195/55R10C aluminum rim - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100km/h approval: Optional, can be retrofitted DESCRIPTION - Original aluminum rims 10-4.5J, anthracite - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Additional sloping rear end ensures a particularly low drive-on angle - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting. - Very sturdy welded steel frame - Storage compartments embedded in the loading area for drive-on ramps at the rear - Continuous drive-on ramp, + additional ramps, foldable, adjustable (heavy-duty) - Loading area, front wooden floor (instead of ramp shafts at the front) - Sliding contact edge for drive-on ramps for different track widths - Comfort package for professional use consisting of: - electrically operated tipping function incl. cylinder - very fast tipping of the loading area - for very flat drive-on angle - battery with 12V power supply is installed in the vehicle - electric cable winch, Warn 8000Cable winch, Warn 8000 - 3600 kg pulling force - Electric winch equipped with radio remote control and steel cable as well as central deflection pulley - CTEK battery charger - Lockable floor storage box with spring-loaded lid - Hole pattern of galvanized steel lanes - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Side panels color: black - Additional lashing options thanks to side railing - Removable railing all round: The multi-part side profile railing offers numerous lashing points and is removable so that wider loads can be transported. - Frame completely hot-dip galvanized - Spare wheel mounted on the drawbar for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! For over 30 years we are Brian James / Humbaur / Hapert / Unsinn Todpfeu Hrzrex Antjb

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Vibration Test Stand – Top Condition, including temperature chamber (up to 120°C) & software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic/Servoelectric High-Frequency Cyclic Testing Machine) Maximum test force: 10 kN (Static and dynamic range) Maximum machine travel: 12mm Date of purchase: December 2015 Condition: Almost new, very little use, immediately ready for operation (Plug & Play) Tjdpfxjzunz Ns Anteb Availability: Immediate For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a 10 kN nominal load and 12mm stroke. The system was acquired for dynamic endurance vibration tests and lifetime determination as part of a research project and has not been used since. It is in excellent, virtually new condition both visually and technically. The complete package includes a matching temperature chamber with controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal ambient conditions. System & Scope of Delivery: Load frame Dyna-Mess TP 10kN HF with highly accurate force and displacement sensors. Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely autonomously and is immediately ready for operation. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfectly suited for laboratories, universities or quality assurance departments looking for a reliable system for fatigue and endurance tests without incurring the budget of new equipment. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, the item is sold ex-works without warranty or guarantee. The sale is preferably to buyers who can collect the item themselves (dismantling and transport must be organized by the buyer). Price: €24,500 negotiable plus VAT.

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Tsdpemk T Rbsfx Antsb dimensions: height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Tsdpfov Ivn Ijx Antob Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: like new (used), TECHMI 10-Piston Automatic Filler – Stainless Steel TECHMI automatic filler with 10 pistons, designed for precise and continuous dosing and filling of liquid, semi-liquid, and viscous products in industrial production lines. The machine is equipped with 10 pistons/filling nozzles, allowing multiple containers to be filled simultaneously in each production cycle, offering an efficient solution for medium to high production industrial processes. Primarily manufactured in stainless steel, it incorporates an in-line container conveyor, a protected filling area, and a control panel for the operator. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic piston filler -Number of filling pistons: 10 -Multi-nozzle configuration -Automatic volumetric filling system -Simultaneous dosing of multiple containers -Integrated container conveyor -Automatic positioning under the nozzles -Stainless steel construction Tedszwwa Tepfx Antsb -Closed filling area with safety guards -Integrated control panel / HMI -Adjustable filling system -Designed for continuous industrial production -Integrable into automatic filling and packaging lines APPLICATION The TECHMI filler is designed for automatic volumetric dosing using a 10-piston system. The containers are automatically transported to the filling area and positioned under the nozzles. The piston system dispenses a controlled amount of product into several containers simultaneously before transferring them to the next stage of the line. The piston filling technology is particularly suitable for products that require controlled volumetric dosing, including products with higher viscosity or consistency than those typically processed by gravity filling systems. It can be integrated with: Container feeding systems Bottle and jar conveyors Capping and sealing machines Cap feeders Weight checkers Metal detectors and inspection equipment Labeling and coding equipment Stacking and end-of-line systems APPLICATIONS A solution especially suitable for food manufacturers, sauce and condiment producers, canning companies, and packaging companies that require an automatic multi-head volumetric filling system. Depending on its configuration, it can work with sauces, creams, purees, pastes, jams, tomato-based products, condiments, and other liquid or viscous products. The 10-piston configuration allows for the simultaneous filling of multiple containers, making it particularly interesting for industrial lines that require automated and repetitive dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113720 € 2149.31 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Tedpfx Aewiq E Ajntsb Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113620 € 2147.42 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Todpfowirghsx Antsb Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Year of construction: 2000, condition: used, = Additional options and accessories = - Beacon(s) - Central locking - Electrically adjustable door mirrors - Work lamp(s) = More information = General information Mileage: 3.236 km Cab: single, day Technical information Power: 125 kW (170 HP) Type of fuel: Diesel Tedpfozp U Irsx Antsb Drive: motorised Transmission: Automatic GVW: 13.000 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 334,520 km, first registration: 01/1986, fuel type: gasoline, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 1986, LICENSE PLATE: PD9815306 TITLE: FIAT 60 10 USED SPECIAL PURPOSE VEHICLE FOR MOBILE SHOP (CATEGORY C LICENSE) REF. 25C40 YEAR: 1986 HORSEPOWER: 100 ENGINE DISPLACEMENT: 4570 cc EMISSIONS: Euro 0 KILOMETRES: 334,520 TRANSMISSION: Manual TOTAL VAN LENGTH: 6.00 m TOTAL VAN WIDTH: 2.10 m TOTAL VAN HEIGHT: 3.00 m INTERNAL VAN LENGTH: 4.10 m INTERNAL VAN WIDTH: 1.82 m INTERNAL VAN HEIGHT: 1.90 m COUNTRY OF ORIGIN / ABROAD: Italian AXLES: 2 WHEELBASE: 3000 mm SEATS: 3 PAYLOAD: ACCESSORIES: - Roof luggage rack with manual awning (to be replaced) Tedpfoxya I Sox Antjb REFURBISHED: No LAST INSPECTION: 21/05/2024 TYRE CONDITION: 50% Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales department for updated pricing and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA DEMOUNTABLES operates in the field of sales and procurement of industrial and commercial vehicles, with a focus on the waste management sector. We specialize in trucks, trailers, and demountable equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 bins, containers—with or without demountable cranes. E.&O.E. Due to the large number of listings and details provided, Aurora recommends verifying the accuracy of the information with our sales staff.

Year of construction: 1988, condition: good (used), coil weight: 10 t arm length: 1.400 Tsdpfx Ajrryyontjb arm Ø: 300 mm coil OD: max. 1.300 mm