Used Dmg Mori Machining Center for sale (72,356)

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMU 50 Evo linear Control: Heidenhain iTNC 530 Year: 2005 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes: 108° C-Axis: 360° Rapid motion: (X/Y/Z): 80 / 50 / 50 m/min. Amount of controlled axes: 5 Spindle speeds: 18.000 rpm Tool: SK 40 Toolchanger Hfjdpfx Aqezi Dzhegsn Tool capacity: 30 NC-panning and rotary Table Table size: 500 x 380 mm Power consumption: 52 kVA KW Machine weight: 6,5 kg Req. space (LxBxH): 5,4 x 6,5 m Equipment No cooling through spindle No chip conveyor: Spänewanne Caliper Working mode: 4

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Fanuc Series 18-M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Rapid traverse rate, X-axis: 30,000 mm/min Rapid traverse rate, Y-axis: 30,000 mm/min Hfjdpfx Aoz Ir Iwoqgon Rapid traverse rate, Z-axis: 30,000 mm/min Table length: 650 mm Table width: 500 mm Spindle speed: 10,000 rpm Speed ranges: 2 Spindle interface: ISO 40 Tool positions: 30 Tool selection: Random MACHINE DETAILS Control system: Fanuc Series 18-M Coolant pressure: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,140 x 2,090 x 2,900 mm Weight: 7,000 kg

Condition: used, Year of construction: 2013, Control Heidenhain x-travel 800 mm y-travel 650 mm z-travel 550 mm b-axis -5 / +110 ° c-axis 360 ° table dimensions 800 x 700 mm max. workpiece weight 600 kg spindle tunring speed 18.000 U/min Number of working hours ca. 71.618 h Hfedpfx Aqez Hqkzsgon spindle hours ca. 33.508 h Condition: Used Includes ZERO CLAMP loading robot Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2009, Horizontal machining center Machine type: DMG DMC 65 H duoBlock Control: Siemens 840D Solutionline Year: 2009 new spindle: 2026 SPECIFICATIONS Travel X-Axis: 700 mm Y-Axis: 700 mm Z-Axis: 700 mm Spindle speeds: 12.000 rpm Tool: CAT 40 Toolchanger Tool capacity: 45 Amount of paletts: 2 Palett size: 500 x 500 mm Equipment Chip conveyor Chip rinsing pistol Internal cooling: 40 bar Cooling tank: 960 l Caliper: Renishaw Tool setter: Blumlaser 3D Quickset Electronical handwheel Hodpfx Aqjzi Dz Isgofn New in 2026 Spindle bearing Rotary union All pneumatic lines All oil and air filters All oils and fats Laser serviced Various wearing parts

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, controller manufacturer: MITSUBISHI, controller model: M-730UM, number of axes: 3, This 3-axis DMG MORI NLX1500MC/500 was manufactured in 2015. It features a spindle output of 11/7.5 kW and a maximum spindle speed of 6,000 min-1. The machine is equipped with a 12-station turret and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX1500MC/500 horizontal turning machine we have for sale. Contact us for further details. - Operation Panel Type: ERGOLINE TOUCH (21.5 + 15.6)- Customer Factory Voltage: 380 V- Frequency: 50 Hz- Nominal Bed Length: 500 mm- Spindle 1 Output: 11 / 7.5 kW- Spindle 1 Speed: 6,000 min-1- Spindle 1 Through-Spindle Hole Diameter: 61 mm- Spindle 1 Chuck Type: Hollow Chuck (6")- Spindle 1 Chuck Manufacturer: Kitagawa- Spindle 1 Chuck Cylinder Stroke Check: Stroke end detection- Turret 1 Type: 12 Stations- Turret 1 Milling Function: Provided- Turret 1 Rotary Tool Spindle Output: 5.5 (3 min) / 3.7 kW- Turret 1 Rotary Tool Spindle Speed: 10,000 min-1- Turret 1 Rotary Tool Spindle Torque: 29 N·m (3 min) / 14 N·m- Turret 1 Tool Mounting Method: By bolts- Turret 1 Overhang of O.D. Cutting Rotary Tool: 100 mm (Y-axis stroke control)- Tailstock: Provided (Programmable Z-axis travel type)- Tailstock Spindle: Live Center MT4- Chip Conveyor: Provided (Right disposal type, Hinge)- Coolant System: High-pressure (635 W / 1040 W), Water-soluble coolant Technical Specification Counter Spindle No Driven Tools Yes Hfjdpfx Aoz Dt D Eoqgon

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMC 60 T RS 3 Control: Siemens 840 D Year: 2007 new spindle: 2025 Neue B-Achslager Geometrieprotokoll vorhanden Neue Scheibe Neuer Klemmring SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 780 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis Panning head Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger: Kettenmagazin / chain magazine Tool capacity: 180 Hfsdpfx Aezi Dy Roqgen Tool lenght: 315 mm NC rotary table Palett size: 630 x 500 mm Palett system Amount of paletts: 5 Equipment Chip conveyor cooling system Internal cooling: 40 bar Air blow Roto Clear

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Spindle nose – table: 120–730 mm Table size: 1,250 × 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW (40 %) Rapid traverse rate X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with free magazine slot: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control system: Heidenhain 530 Hodpfx Aqsz Im Tnsgefn Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air: 3/8″, 6–8 bar Power supply: 400 V / 75 A / 35 kVA Coolant tank: 250 l Guideways X/Y/Z: 45/45/45 mm Machine weight: 7,500 kg Internal cooling (IKZ): 22 bar Program runtime: 12,214 h Spindle hours: 14,123 h Machine operating hours: 39,242 h Control system operating hours: 34,987 h EQUIPMENT Chip conveyor Electronic handwheel Internal cooling (IKZ) 22 bar Oil-cooled spindle Linear guideways X/Y/Z Machine bed made of cast iron Note: Machine is sold without tools and vise.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Counter Spindle Yes Hodpfxszy N Nlo Aqgofn Driven Tools Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Hedpfoyhwpwjx Aqgsfn Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Hjdpfx Aoyz S T Seqgefn

Condition: used, Year of construction: 2005, BAZ DMG milling machine cover V75linear (approx. 16,000 spindle hours), year of manufacture 2005. Hfedpsz Sn E Iefx Aqgon

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,613 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2023. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a powerful spindle capable of 3,250 rpm and a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Axes: 3 (X, Z, C); no Y-axis; no counter spindle • Spindle operating hours: approx. 3613 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • C-axis: main spindle CMain spindle and chuck • Spindle nose: A2-8 • Bar capacity: 102 mm (upgraded main spindle) • Spindle power: 33 kW @ 40% DC / 22 kW continuous • Spindle torque: 630 Nm @ 40% DC / 420 Nm continuous • Chuck: SMW BH-D 320 / A2-8, D103 mm (as specified) • Function: differential clamping pressureTurret and driven tools • Turret: 12-position VDI40 with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW @ 40% DC; 20 Nm @ 40% DCTailstock • Travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options (machine) • Setup package • Tropical climate package • 12-bar coolant supply • Manual working-area washdown gun • Variable spindle speed software option • DMG MORI IoTconnector • Digital Manufacturing PackageConstruction • Inclined cast-iron bed • Linear guideways, 45 mm width Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • Tooling: • Set of 12 tool holders Hjdpfx Aqoz Ipilogjfn • Set of 6 boring tool holders • ALGra driven-tool holder set Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, operating hours: 10,168 h, functionality: fully functional, machine/vehicle number: NL254120635, CNC turning machine Manufacturer: DMG MORI Type: NLX 2500 SY 700 with WH10 automation Year of manufacture: 2012 Hfsdjy Szwhjpfx Aqgon Turning diameter: 460 mm Turning length: 795 mm Control system: MORI SEIKI M730 BM Diameter over cross slide: 590/360 mm Spindle bore: 80 mm Travel distances X/Z: 260/795 mm Total power consumption: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 3.994 x 3.056 x 2.187 m

Year of construction: 2006, condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Hfodjvi N D Sopfx Aqgen

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) Hodpfxex Icyvo Aqgofn All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2004, operating hours: 4,900 h, functionality: fully functional, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,500 rpm, Gildemeister GMX 200 Linear (2004) KUKA KR 150-2 Robot (2004) Automated Mill-Turn Production Cell For sale: High-performance automated machining cell comprising a Gildemeister GMX 200 Linear mill-turn center and a KUKA KR 150-2 industrial robot. The system is engineered for efficient, flexible, and unmanned production operations. CNC Lathe / Mill-Turn Center Gildemeister GMX 200 Linear – Technical Specifications General Manufacturer: Gildemeister Model: GMX 200 Linear Year of manufacture: 2004 Machine type: CNC mill-turn center Control system: Siemens Sinumerik 840D Drive technology: Linear motors on X, Y, and Z axes Turning Hfjdex Iflhepfx Aqgjn Maximum turning diameter: 560 mm Turning diameter over cross slide: 400 mm Maximum turning length: 1,070 mm Bar capacity: 65 mm Axes and Travels X-axis travel: 485 mm Y-axis travel: 160 mm Z-axis travel: 1,070 mm B-axis swivel range: ±110° Main Spindle Spindle speed: 5,000 rpm Spindle power: 37 kW Tool interface: HSK-A63 Milling Milling spindle speed: 12,000 rpm Tool holder: HSK-A63 Tool System Number of tool positions: 48 Automatic tool changer Equipment Y-axis B-axis milling unit Linear motor technology Chip conveyor Central coolant system Full CNC integration for robotic automation Industrial Robot KUKA KR 150-2 – Technical Specifications General Manufacturer: KUKA Model: KR 150-2 Robot type: 6-axis industrial robot Year of manufacture: 2004 Application: Part handling / automation Load and Reach Maximum payload: 150 kg Maximum reach: 2,700 mm Axes Number of axes: 6 Axis Motion range A1 ±185° A2 −155° / +35° A3 −120° / +158° A4 ±350° A5 ±125° A6 ±350° Axis Speeds A1: 120 °/s A2: 110 °/s A3: 110 °/s A4: 190 °/s A5: 180 °/s A6: 260 °/s Accuracy Repeatability: ±0.2 mm Controller and Electrical Controller: KUKA KRC2 Power supply: 3 × 400 V / 50 Hz Installation Mounting: Floor-mounted Installation position: Freely programmable Itsbmtox Iflhj Dty Aoc Weight Robot weight: 1,245 kg Production Cell Advantages - Turning and milling in a single setup - Automated part loading and unloading - Suitable for serial production and unmanned operation - High precision and productivity - Ideal for CNC job shops and industrial manufacturing 📍 Location: Finland 🚚 Delivery: Transportation can be arranged 📄 Condition: Used ℹ️ Note: Technical specifications to be verified with the seller prior to purchase.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm A-axis: 360° × 0.001° A-axis speed: 20 rpm Spindle speed: 0–9,000 rpm Speed control: stepless Tool interface: DIN 69871 SK40 Working feed rate: 5–28,000 mm/min Rapid traverse rate X/Y/Z-axis: 28,000 mm/min Table design: Bridge table with 4 sides Table length: 1,800 mm Table width: 113 mm Table load capacity: approx. 150 kg Magazine design: Chain magazine Magazine capacity: 44 Max. tool diameter: approx. 70 mm Max. tool diameter with free adjacent positions: approx. 200 mm Max. tool length: approx. 240 mm Max. tool weight: 5 kg Max. total weight of tool magazine: approx. 200 kg Tool change time: approx. 8 s MACHINE DETAILS Control system: Siemens Sinumerik 810D Total power consumption: 14 kW Dimensions & Weight Dimensions (L x W): approx. 6,500 x 3,500 mm Machine weight: approx. 9,000 kg Operating hours: 19,357 h EQUIPMENT Second milling spindle Exchangeable milling spindle Coolant system (coolant tank: approx. 480 l) Internal cooling External cooling Clefil RBF-E100 unit (coolant pressure: 20 bar) Clamping system Hydraulic clamping options in the machining area Pneumatic clamping options in the machining area Römheld hydraulic unit (max. hydraulic pressure: 500 bar) Additional equipment Chip conveyor Coolant nozzle in the machining area Hfedpfx Aqsz Izdhogsn Enclosed work area enclosure according to UVV Automatic measuring probe RWP20.00 Various SK40 tool interfaces Technical documentation Layout plan

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,170 h, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 4,800 kg, number of axes: 2, CNC Turning Center manufactured in 2014. This DMG MORI NLX 2500/700 features a maximum turning diameter of 260 mm and a turning length of 795 mm. With a robust machine weight of 4800 kg and a rated power of 25 kVA, it is designed for precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX 2500/700 machine we have for sale. Contact us for further details. • Machine type: CNC Turning Center • Year: 2014 • Made in: Japan • Serial number: NL252340704 • Max. turning diameter: 260 mm • Max. turning length: 795 mm • Rated power: 25 kVA • Machine connected and available for inspection/testing. • Main electronic connection: 200 V, 3-phase, 50 Hz Hjdpfx Aqjz Akp Segjfn Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] MACHINE HOURS - Number of working hours : 18186 [h] EQUIPMENT - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 - Electric transformer Hfsdpfxsy I Dixe Aqgjn

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 370 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE Hfedpsy I Di Eefx Aqgen - X/Z stroke : 380 / 615 [mm] - Y stroke : 105 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 / 40.000 / 50.000 [mm/min] - B Axis stroke : +/- 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : CAPTO C5 - Spindle speeds : 12000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 815 [mm] POWER SUPPLY - Total installed power : 39 [kVA] EQUIPMENT - CNC : FANUC 31iB5 - Electronic handwheel - Coolant tank - Filtration : ECODE IP 600 C - Chips conveyor : MAYFRAN CS 1 - Oil mist extractor - Tool probe : Renishaw - Workpiece probe : Renishaw - Collet chuck - Chuck 3 jaws

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Hfjdpfx Aqjz An S Rsgjn Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Hfedpfxjzl S Uzo Aqgsn Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Hsdpsxqp Ivjfx Aqgsfn Z = 1,050 mm B = 360°, 0.001° Max. spindle speed: 12,000 rpm Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Hfodpfexgnz Tjx Aqgjn Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Hfsdpfx Ajzlqw Ioqgon Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Signal light 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks