Used Drill Chuck Sk40 for sale (8,619)

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 Iiodpfx Aey R Tk Rsb Nob HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2010, condition: good (used), Double mitre saw DGS400 for 45° (frame) cuts with digital left stop. Drilling or dovetail milling machine T20NC for frame assembly. 4 motors at 1.1 kW. Speed: 26,500 rpm. Direction of rotation: right and left. Milling cutter / drill bit. Isdpfx Aoxxytxsb Neib

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, Arm length 1800 mm, drilling capacity 80 mm, weight 7000 kg Isdpsyzq Dpefx Ab Neib

Condition: used, diameter 200 mm boring diameter 40 mm Ijdpfey S Dt Ssx Ab Nsib - /

Condition: used, diameter 315 mm hollow 70 mm chuck width 110 mm weight / kg Three-jaw chuck from Forkardt F315 1 jaw is missing! Type: F315 Diameter: Ø315mm Passage: approx. 90mm Ijdpfx Abey S D Hlo Noib Lining width approx.: 115mm

Condition: used, diameter 400 mm hollow 100 mm chuck width 100 mm weight ca.90 kg Diameter: Ø4000mm Iiodpfx Ajy S D Ezsb Nob Passage: approx. 100mm Chuck width: 100mm Weight: 90kg

Condition: used, diameter 250 mm boring diameter / mm - / hollow 65 mm Forkardt power chuck including flange Type: 3NHF250-65-Z8-S12 nmax: 4500/min Diameter: 250mm Passage: 65mm Factory no.: Y615126 Iijdpfoy S D Euex Ab Nob

Condition: used, diameter 600 mm hollow 140 mm Iisdpfx Aoy S D Amob Nsb weight 180 kg Ø: 600 mm Passage: 140 mm Weight: 180 kg Individually adjustable jaws The jaws must be checked prior to commissioning.

Condition: used, diameter 450 mm hollow 100 mm chuck width 100 mm weight ca.100 kg Make:RÖHM Diameter: Ø450mm Passage: approx. 100mm Chuck width: 100mm Weight: 100kg Isdpoy S Dx Usfx Ab Nsib

Condition: used, diameter 315 mm weight of the machine ca. 70 kg Iedpfxey S Dwqo Ab Nsib

Condition: used, diameter 315 mm weight of the machine ca. 100 kg Iisdey S Dwkspfx Ab Njb

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) / mm throat / mm Isdpfxey S Dvms Ab Neib bore stroke / mm total power requirement 1,5 kW

Condition: used, diameter 315 mm hollow / mm chuck width 128 mm weight ca.70 kg Make: Forkardt Iiedpfoy S Ducjx Ab Njb Type: F315 Diameter: Ø315mm Passage: approx. 85mm Chuck width: 140mm Weight: 70kg

Condition: used, diameter 330 mm hollow 90 mm chuck width 100 mm weight ca.90 kg Diameter: Ø330mm Passage: approx. 90mm Chuck width: 100mm Ijdpsy S Dt Eofx Ab Nsib Weight: 90kg

Condition: used, diameter 400 mm Iedpfxey S Dtfj Ab Njib hollow ca. 100 mm chuck width 90 mm weight / kg Chuck Four-jaw chuck Diameter: Ø400mm Chuck width: 90mm Passage: approx. 100 mm

Condition: new, diameter 400 mm boring diameter 125 mm weight 62 kg Ijdpfx Ajy S Dqdsb Njib

Condition: used, diameter 500 mm hollow 80 mm weight 90 kg Iodsy S Dpajpfx Ab Neib Ø 500 mm Passage: 80 mm Hole circle: 85 mm Weight: 90 kg

Condition: used, diameter 315 mm hollow 90 mm chuck width 115 mm weight / kg Three-jaw chuck from Forkardt F315 1 jaw is missing! Type: F315 Diameter: Ø315mm Passage: approx. 90mm Lining width approx.: 115mm Ijdey S Dn Aspfx Ab Nsib

Condition: used, diameter 400 mm hollow 100 mm chuck width 180 mm weight ca.50 kg Iiedpfx Absy S Dnpo Nob Diameter: Ø250mm Passage: approx. 100mm Chuck width: 180mm Weight: 50kg

Condition: used, diameter 250 mm boring diameter 100 mm - / Type: 4KT 250 Diameter: 250mm Iisdpjy S Dncsfx Ab Nsb Bore diameter: 100mm n-Max: 2500 / min f-max: 6000 / dan

Condition: used, Year of construction: 2000, number of spindles / bore capacity in steel (diameter) / mm Iiedsy S Dm Sopfx Ab Neb bore stroke / mm BD13M – 5-Spindle Gang Drill / Bench Drill

Condition: used, diameter / mm boring diameter / mm - / total power requirement / kW weight of the machine ca. / t required space / m dividing head Chuck DH 130 x 4 II / TGL 30 2332 Exact dimensions available upon request. Iedpfx Abeyk Ilnj Njib

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material. Iiedsy Su Iyspfx Ab Nsb

Condition: new, functionality: fully functional, Key features of the DOOSAN T4005 Drill Tap Center may include: High Precision: The DOOSAN T4005 Drill Tap Center is engineered for precise drilling and tapping results, delivering consistent quality in manufactured components. Iijdsy Sv Tqjpfx Ab Neb High-Speed Spindle: Featuring a powerful, high-speed spindle, the machine efficiently processes various materials—such as metals, plastics, and composites—while maintaining productivity. Multi-Axis Capability: Many DOOSAN T4005 models are equipped with multiple axes, enabling complex machining operations and greater flexibility in component production. Automatic Tool Changer: The machine often includes an automatic tool changer, allowing for smooth transitions between different tools and minimizing setup times to enhance efficiency. User-Friendly Interface: The CNC system typically offers an intuitive user interface, simplifying programming, process monitoring, and operation for users at all experience levels. Robust Construction: Designed for industrial use, the machine is built with high-quality materials and components to ensure durability and continuous operation. Customization Options: Depending on the manufacturer, the CNC machine may offer various customization options to adapt to specific machining or production requirements.

Condition: used, diameter 310 mm Iodoy Suqnjpfx Ab Noib hollow ca. 100 mm chuck width / mm weight / kg - three-jaw chuck - dimension Ø200mm - Passage: Ø80mm