Used Drills Grinder for sale (6,028)

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Bjdpszd Hntsfx Aqwjll Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Bsdpjh Ek H Ssfx Aqwsll Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: as good as new (ex-display), machine/vehicle number: G-V7-LBM2200-2S-RL-400-Schweiz, Exhibition machine Hans Schreiner long hole drilling machine with one-hand operation. Optimum work thanks to fixed table and movable drill head. Standard with left/right rotation, dowel drilling device and 2-speed motor including tool compartment, eccentric clamp, miter stop Technical data: Bjdpevw Edqefx Aqwoll Motor output 3.8 kW Voltage 400 V Table size 570 x 300 mm Max. drilling depth 150 mm Side travel 290 mm Height adjustment 140 mm Dowel drilling device 16, 20, 22, 25 mm hole spacing Max. drill holder 20 mm Speeds 1400/2800 rpm Weight 140 kg Suction connection 100 mm Packaging dimensions 855 x 600 x 1160 mm Prices subject to change, errors, printing and typesetting errors reserved

Year of construction: 1990, condition: good (used), # 1299, drill automat with magazine, 3 piece drill motors with each 2 2 spindles and 25 mm grid, milling motor for floor groove and chain drive after general repairs and new electric and new pneumatic Bjdjcm Uf Ajpfx Aqwoll

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Blodpfx Aqsw Hf T Newjl

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 5-axis machining center with traversing table, model MFS, equipped with an 840D Siemens control system. Travel ranges: 13200 x 3000 x 1200 Spindle: SK50, motor with a rated power of 15 kW. Bledpfx Aqoy Rgt Eewsl Maximum spindle speed: 2500 rpm.

Condition: used, Year of construction: 1997, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Empty weight: 200 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Power [kW]: 1.1 - Table length [mm]: 290 - Table width [mm]: 290 - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bedpezry Ntsfx Aqwjll Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1988, taper MK 1 Bedpeztfwfefx Aqwell weight of the machine ca. 140 KG

Condition: used, Year of construction: 2001, Year: 2001 Condition: good Counter: N/A Technical specification: - Number of spindles: 1 - Drill hole diameter: 2–9 mm - Distance from the edge of the paper to the hole: 28 mm - Vertical spindle movement: lever-operated - Maximum paper stack height: 50 mm - Machine dimensions (H × W × D): 65 × 70 × 53 cm - Power consumption: 0.2 kW - Working table width: 450 mm - Drill rotation speed: constant - Weight: 48 kg - Voltage / frequency: 230 V / 50 Hz The CITOBORMA 111 paper drill is the best-selling paper drilling machine in the Nagel range. It is used not only in bookbinding and printing companies, but also wherever a manual hole punch is no longer sufficient, such as in banks, offices and larger companies. The Citoborma 111 quickly, easily and safely drills paper stacks of up to 50 mm. The machine requires minimal physical effort to operate and can be used by virtually anyone. For standard office applications, the manufacturer has preset the following hole spacing configurations: - 2 to 4 holes: 80 / 80 / 80 mm - 4 holes: 45 / 65 / 45 mm - 3 holes: 108 / 108 mm Blodszux D Uspfx Aqwol - 6 holes: 19 / 19 / 50 / 19 / 19 mm

Condition: used, Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Technical data: Bljdpfxoztvx Ts Aqwel - Drilling spindles: 21 - Pitch: 32 mm - Passage width: max. 1,000 mm - Swivel mechanism: pneumatic - Fax: , Mobile: , Machine No. 208695, Jan 2011, Cost price €1,000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, purchase price €500

Condition: used, Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table router with feed in a single machine, and comes with a comprehensive range of accessories. Technical data: Bedpfx Asztvywsqwsll - Motors: 2 - Length: approx. 320 cm - Width: approx. 140 cm - Height: approx. 160 cm - Table: swivelling - Technical details: on request

Condition: excellent (used), Catalog number: 8071 Bodpfezuk Aiox Aqwsll TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of feed cylinder (drilling depth adjustment): 50 mm - Drilling speed, pneumatically adjustable - Drilling angle, manually adjustable - Main motor: 1.5 kW - Side guides: 400 mm - Compressed air requirement: 6-8 bar - Diameter of dust extraction port: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES – Made in Italy – 21 spindles – drill bits mounted on quick-release fittings – Drilling in vertical, horizontal, and angled positions – Unpainted – Used drill press, very good condition Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Bljdpfjy Tn Ntsx Aqwsl

Year of construction: 1999, condition: ready for operation (used), Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement. Bjdsy Ull Uspfx Aqwell

Year of construction: 1997, condition: ready for operation (used), Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement. Bjdpfxey Ulmfs Aqwsll

Year of construction: 2010, condition: ready for operation (used), Pneumatic pressure: 8bar, connected load: 2kW, weight: 550kg, without documentation, spare parts or accessories, was maintained regularly. Bledpfx Aqemccwfowol

Year of construction: 2023, condition: ready for operation (used), Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. Bodpjnp I N Ajfx Aqwsll

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Bodpjw D Evlofx Aqwell

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China. Bljdpfx Aexf Ikreqwel

Year of construction: 1980, condition: ready for operation (used), A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible. Bjdpfx Ajy Rtfzsqwsll

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Bedot Hkh Aopfx Aqwell

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Blsdpfozvmvhex Aqwjl Width: 930 mm Height: 1330 mm

Condition: used, Technical specifications: Max. transverse travel of the working unit: 300 mm Max. longitudinal travel of the working unit: 200 mm Vertical stroke of the working unit: 250 mm Length of the work table: 570x300 mm Power supply: 380 V Bljdpfezvm Nnjx Aqwel Motor power: 2 kW Overall dimensions: Length: 1200 mm Width: 1010 mm Height: 1100 mm

Condition: refurbished (used), Product number 1225 Machine dimensions: 760 x 980 x 1320 mm (width x depth x height) Sieve diameter: 130 mm Weight: approx. 470 kg Power: 16 kW Power supply: 400 V 50Hz 5N Filling system: Auger Protection rating: IP 69 Capacity: 12 tons/8h Blsdpfx Aezvrgljqwel Housing made entirely of stainless steel. Gearbox and motor overhauled. Device after major servicing, ready for operation.

Condition: used, Year of construction: 1977, serial number 2934 weight 709 kg feed ja m/min taper MK 3 Blodeztfytepfx Aqwel