Used Dynaplast Sb 3000 5E for sale (6,757)

Condition: excellent (used), Year of construction: 2006, TECHNICAL DATA Axis data Bedpfx Adswvap Re Ajwl Rapid traverse rates: X, Y, Z, ZB, XB: 35,000 mm/min C: 198,000 °/min (550 min⁻¹) Maximum feed rates: X, Y, Z, ZB, XB: 10,000 mm/min C: 10,000 °/min (27.8 min⁻¹) Minimum input increment: X, Y, XB: 0.001 mm / 0.0001 inch (diameter) Z, ZB: 0.001 mm / 0.0001 inch C: 0.001° Machining capacities Maximum machining diameter: Ø16 mm (5/8 in) Maximum headstock stroke: fixed guide bushing: 205 mm (8 in) rotating guide bushing: 155 mm (6–3/32 in) rotating magic guide bushing: 155 mm (6–3/32 in) Maximum drilling capacity with driven tool: Ø6 mm (15/64 in), Ø4 mm (5/32 in) Maximum tapping capacity with driven tool: M5×P0.8, M3×P0.5 Maximum milling capacity: Ø10 mm (25/64 in), Ø7 mm (9/32 in) Maximum thread cutting capacity: M8×P1.25 Machine configuration Operating mode: right-hand machining station Design: integrated mechanical/electrical setup Dimensions (L×W×H): 1861 × 1060 × 1750 mm Spindle height: 1060 mm Weight: approx. 1700 kg Main spindle Spindle speed: max. 10,000 min⁻¹ Speed control: S-command + direct 5-digit command Main spindle drive: 2.2 kW (continuous), 3.7 kW (15 min/60% duty cycle) Indexing: 15°, 1° Tool combinations Various combinations with 1–3 spindles for tool diameters Ø12 mm, Ø10 mm, or Ø6 mm Tool holders for ER11 or ER16 Drill mounting Number of tools: 4 Max. speed: 5000 min⁻¹ (ER16), 7500 min⁻¹ (ER11) Drive motor: 0.4 kW Tool selection: servo motor Backworking unit Max. chuck diameter: Ø16 mm (5/8 in) Max. part length: 80 mm Max. outer spindle travel: 30 mm Max. part ejection length: 50 mm Spindle speed: max. 8000 min⁻¹ Spindle drive: 100 W, AC servomotor Tools: 4-spindle unit Max. drilling capacity: Ø8 mm (5/16 in) Max. tapping capacity: M6 × P1.0 SCOPE OF SUPPLY Includes (non-exhaustive list): STAR SB-16D CNC Swiss-type lathe Fire extinguishing system Coolant tank LNS Tryton-112 bar feeder High-pressure pump Machine accessories Bar feeder accessories Complete operating documentation Exact scope of supply as per photo documentation.

Condition: ready for operation (used), Year of construction: 2003, turning diameter 815 mm centre distance 3000 mm swing diameter over slide rest 485 mm spindle bore 137 mm spindle turning speed range max. 1200 rpm rapid traverse 5 m/min spindle motor 28 kW Bedey H A Nzopfx Ad Ajwl tailstock quill diameter 115 mm tailstock quill stroke 250 mm total power requirement 30 kW weight of the machine ca. 7,0 t dimensions of the machine ca. 5,87 x 2,10 x 2,10 m Equipment: * CNC-control E.C.S. 2402 * 3-jaw chuck * 4-jaw faceplate, diameter 700 mm * 4-jaw faceplate, diameter 400 mm * 3 Steady rests * Chip Conveyor Without boring bar holder and boring bar.

Condition: like new (used), Year of construction: 2009, operating hours: 20,929 h, functionality: fully functional, machine/vehicle number: 23500, travel distance X-axis: 3,320 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain, table width: 3,400 mm, table length: 700 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 20,929 h, input voltage: 230 V, We are selling the machine because we need to free up space in the factory. CNC Machining Centre TVMC-3000 (L) Bsdpeyt Np Tofx Ad Aewl Table: up to 3400 × 700 mm (maximum load 4,000 kg). Travel X/Y/Z: up to 3320 × 710 × 610 mm. Spindle: BT40 taper, speed up to 14,000 RPM. Automatic tool changer: 24 positions. Rapid traverse: up to 30 m/min. Precision: positioning ±0.005 mm / 300 mm. CNC control available: Heidenhain.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Bwodpfx Adsy Ih Tzj Aol Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. Bsdpfxenfvx Ns Ad Ajwl A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping Bedjng Ax Sjpfx Ad Aewl - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Year of construction: 2021, condition: excellent (used), functionality: fully functional, For sale the STONE SAW WITH FIXED BRIDGE FOR STONE, QUARTZ AND CERAMIC SLABS, the producer ACHILLI S.r.l, Type: TFM 3000 Bwsdpfx Aey I Dqied Ajl Year: 2021 Very good working condition, as NEW ! The cutting length is 3.4 m , 45° cutting max disc diameter 500 mm ,laser collimator marking cut,

Condition: ready for operation (used), Year of construction: 2001, clamping force: 3,000 kN, overall weight: 13,900 kg, This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details. Bwodoy Icikepfx Ad Aol • Max. Hydraulic Pressure: 190 bar • Max. Flow Rate: 164 l/min • Total Amperage: 181 A • Heating Amperage: 102 A • Drive Amperage: 79 A • Control Amperage: 67 A • Operation Voltage: 400 V • Frequency: 50 Hz • Certification: CE

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 3,000 mm, turning diameter: 630 mm, spindle bore: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 2 rpm, travel distance X-axis: 355 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 10 W, rapid traverse X-axis: 8,000 m/min, rapid traverse Z-axis: 5,000 m/min, total width: 1,850 mm, quill travel distance: 180 mm, quill diameter: 100 mm, quill stroke: 180 mm, workpiece weight (max.): 3,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, POREBA CNC TRP 63 Year of manufacture: 2002 Condition: used Machine under power, inspection possible Technical data: • Type: TRP 63 MN • Control: SIEMENS SINUMERIK 810D • Serial number: 7402-09-03006-03 • Centre height: 325 mm • Centre distance: 3000 mm • Spindle bore: Ø 90 mm • Main drive: 10 kW • Power supply: 3 × 380 V / 50 Hz Equipment: • MULTIFIX C tool turret (without holders) • Tailstock with manual quill feed • 2 electronic handwheels • Chip conveyor Bwodpfxeyhp Ekj Ad Aol • Coolant system (pump integrated in chip conveyor) • Rear safety guard

Condition: ready for operation (used), Voltage: 400 V three-phase Power: 48 kw Max. temperature: 1200 °C Bsdspgwbrspfx Ad Aswl Inside dimensions: 3000 * 550 * 500 mm External dimensions : - Width: 1270 mm - Length: 3400 mm - Height: 2700 mm

Condition: new, maximum load weight: 2,310 kg, overall weight: 3,000 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, total width: 2,034 mm, total height: 830 mm, Year of construction: 2026, Humbaur Universal 3000 Wooden Floor – Available for Immediate Delivery Base price: €5,590 Our price: €4,650 incl. VAT, delivery costs (collection in Nuremberg), including vehicle documents. Bwsdpfx Adoyxz Dho Asl Description: The continuous floor plate mounted on its hot-dip galvanized chassis and frame enables nearly universal transport options. The Universal overrun trailer can be loaded using two corrosion-protected loading ramps. The ramps are adjustable to precisely match the wheel track of the vehicle being loaded. Afterwards, simply slide the ramps underneath the loading area. The cargo is secured with seven lashing rings per side for a safe hold. An aluminum floor instead of a wooden one, aluminum side panels, or a tarpaulin with frame can be retrofitted at any time. Technical Data: Twin-axle Trailer * Unladen weight - 690 kg * Gross vehicle weight - 3,000 kg * Payload - 2,310 kg * Loading area length - 4,000 mm * Overall length - 5,374 mm * Loading area width - 2,030 mm * Overall width - 2,034 mm * Overall height - 830 mm * Loading height - 600 mm * Tyres - 10 inch Standard Equipment: * V-drawbar, hot-dip galvanized * 13-pin plug and reverse light * 18 mm thick floor plate * 2 hot-dip galvanized grid ramps, stowed under the loading area * 2 support legs standard on 3,500 kg models * 7 lashing rings per side on the outer frame profile * Outer frame profile with punched holes * Winch with cable and 3-way adjustable mounting bracket * Automatic jockey wheel

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Bwedpfx Adey Icq Us Ajl Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Bodpfx Aoy Icg Ajd Aewl Throughput capacity up to 5 t/h depending on material and grain size

Year of construction: 2011, condition: ready for operation (used), travel distance X-axis: 3,000 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 900 mm, spindle motor power: 25,000 W, spindle speed (max.): 4,000 rpm, table load: 10,000 kg, number of axes: 3, This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information. Bwsdpfx Adjy H Hl Tj Ael • Guides and travels • Flat guides on all 3 axes, coated with synthetic material • Distance spindle center to table surface: 98–998 mm • Milling spindle • Multi-position milling head KFM 1 • Tool holder: SK 50 (DIN 69871 Form A, DIN 69872 Form A) • Drawbolt tightening torque: 175–180 Nm • Nominal drive power (continuous, two ranges): 25 kW • Speed range 1: up to 930 • Speed range 2: up to 4000 • Max. torque: 800 Nm • Gear ratio: 1:5.6 • Table (workpiece side) • Clamping surface: 3100 × 800 mm • T-slots: 7 × 18 H12 • Alignment slot: 1 × 18 H8 mm • Slot spacing: 100 mm • Feed drives and measuring • Max. feed force Z: 30,000 N • Max. feed force X/Y: 20,000 N • Feed speed: 1–10 m/min • Rapid traverse: 15 m/min • Measuring systems: Direct coded length measuring systems • Hydraulics • Operating pressure: 100 barTools/ Accesories visible on the Pictures are Optional!

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Bsdpfoy Ibiiex Ad Aewl Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Friction washer with stainless steel housing and stainless steel rotor. Bwodpfx Adsy Ia Uko Asl Motor 22 kW

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Bedpfx Adsyapdqj Ajwl Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm Bjdpfxey E H D Hj Ad Aswl suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. Bwsdpfx Adjv T Tq Rj Asl - 1500/3000rpm. - 380V.

Condition: excellent (used), Year of construction: 2013, input voltage: 230 V, Disc slicer model IDEAL SB MHS Schneidetechnik GmbH MHS devices are renowned for their high build quality, durability, and innovative engineering solutions, allowing for the production of highly reliable machines with exceptional functionality. MHS supplies its equipment worldwide, which confirms their quality and versatility. Technical data: Dimensions LxWxH (mm): 896 x 1096 x 778 Required footprint: approx. 0.99 m² Net weight: 200 kg Bread dimensions (mm): 380 x 140-160 x 280 Knife type: Disc Blade diameter: Ø 260 mm Performance: 100 slices/min Slice thickness: 3 selectable settings (8, 10, 12 mm), set during servicing Power supply: 1.0 kW ~230V/50-60Hz Machine body: Stainless steel Application: Designed for slicing all types of bread cooled down to room temperature (+25°C) Operating noise: 67 dB Storage conditions (min/max): from -10 to +45 °C Operating conditions (min/max): from -5 to +35 °C Transport costs depend on weight, volume, and above all, distance. For delivery inquiries, please provide the following information: delivery address (postal code and city). For further details, telephone contact is required – please contact us to inquire about transport costs and other shipping methods. Our contact details are listed under seller's legal information. We sell and export worldwide. Thanks to our large warehousing capacity, we can rapidly and flexibly supply even bulk orders. Bwsdpfxjy Iyxvj Ad Ajl Please contact us before purchasing. Intra-Community invoices issued – VAT exempt. Opening hours Mon-Fri: 8:00-16:00

Condition: ready for operation (used), Year of construction: 2002, This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine. • Workpiece clamping: • Self-centering product clamp, gripping the tube from the outside • Interchangeable clamping jaws for different tube/profile types • Adjustable clamp position for accurate alignment • Workpiece dimensions: • Max product width (single-sided punching): 100 mm • Max product height (single-sided punching): 80 mm • Max product height for through holes: 60 mm • Max travel of product clamps: 3,100 mm • Minimum distance from tube end to first punchable hole: 30 mm • Punching capacity: • Max punching diameter (as delivered, through holes): Ø40 mm • Punching station: Single vertical punching cylinder • Max punching force: 250 kN at 220 bar working pressure • Max vertical stroke of punching cylinder: 80 mm • Performance: • Max strokes per minute: Dependent on cylinder stroke setting and hole pitch • Clamp carriage travel speed: approx. 40 m/min • Positioning repeatability: ±0.1 mm • Machine size and range: • Punching machine working range: > 3.10 m Bwsdoy Hrp Rjpfx Ad Ajl • Support table length: 3.00 m

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter Bjdpfsy Ex Nnsx Ad Aowl lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: used, Barloader BREUNING IRCO SIMAG 42.1 R-3000 Bjdpfjwdamfox Ad Aewl

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, total height: 1,500 mm, total length: 3,300 mm, total width: 870 mm, power: 22 kW (29.91 HP), TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Bwjdjy Hiv Ujpfx Ad Aol Further configuration details can be found in the attached document.

Year of construction: 2022, condition: as good as new (ex-display), ANB-5E Punch tool grinding machine Here we have for sale, brand new, fully-automatic Punch Tool Grinder. The customer bought it in 2022 but never used. Comes with the extra grinding tools seen in a last photo. Comes without original box. The machine have some marks, scratches. Please see al photos. Description: Tool Grinder ANB-5E -Tool Grinder ANB-E is used for sharpening and grinding of the punching tools and dies of TRUMPF, AMADA, FINN-POWER sheet metal processing machines. -The tool grinder is suitable for companies active in sheet metal processing, which has punching machines and do not have their own tool shop with grinders. Thanks to high accuracy of grinding, it is possible to extend tool lifespan up to two times of standard lifespan, provided that tools are sharpened as soon as signs of blunting appear. -Made in Europe Advantages of the Punch Tool Grinder: -Simple operation -Grinding accuracy in tolerance of 0,01 mm -Tool lifespan extension -High quality of grinded surface -Low operation cost -Small dimensions -Reduction of operator time Technical Description: Grinding of the tools is made by special abrasive disc with internal cooling. Cooling liquid prevents overheat of grinded tools, removes mechanical elements rising from the grinding and increases quality of grinded surfaces. Complete set of fixing tools for all standard punching tools and dies is provided with machine.For all types of punching tools it is possible to grind scarf from 0-8 degrees. Bjdpfslx Db Dox Ad Aewl Machine Operation: The tool grinder ANB-5E was designed as fully-automatic machine, where the operator is responsible for the right insertion of the tools, selecting the depth of grinding and pressing the green button. The ANB-5E takes care of the rest. Process of sharpening is fully controlled by the machine and it is performed in several repeating cycles of grinding according to material removal set-up. At the end of the grinding process is the tool moved of the abrasive disc and machine is ready for new grinding. Any questions, welcome.