Used Edda Orbital Stretch Wrapper for sale (882)

Condition: good (used), functionality: fully functional, Year of construction: 1998, Wrapper for round bales (125 cm) or square bales (80x90), with electric control. Rcsdpfxeztnkhe Alaef

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Rodpfxsg Ailce Alaocf Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2008, Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  - Capacity: - 10,200 bph - Working hours: - ~50,000 h - Formats: - Neck finish: 29/21 (can be modified to 1881 or others) - Preforms used: R-PET by Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Kosme linear oven - 8 heating modules - Kosme preform tipper with conveying system Rcjdpfxeyb Tbij Alaof - Kosme preforms feeding rail - Kosme electrical cabinet - Kosme Danfoss VLT drive - Kosme touch screen control panel - Set of spare parts (list on request) - Service history: - Kosme FBA maintenance - Complete Kosme service in October 2024 - Ongoing service by in-house technicians Scope of Delivery  - Stretch blow-moulder KOSME KSB 6R - Preform tipper with conveying system - Preform feeding rail - Electrical cabinet - Drive and control panel - Spare parts list (on request)

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Rcsdpozur Adofx Alaof Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: used, Year of construction: 2013, machine/vehicle number: PAL62, Used SIDEL monocolumn Palletizer 200 Unit per hour -Year 2013Technical Specifications & Performance DataThe Sidel Monocolumn palletizer is an automatic palletizing solution designed for the efficient end-of-line handling of PET bottles in industrial packaging and beverage production environments. Built in 2013, this machine is configured to process a current bottle format of 2.0L and can reach a maximum performance of 200 layers per hour.Manufacturer: SidelModel: MonocolumnManufacturing year: 2013Container material: PETCurrent format: 2.0L bottlesMaximum capacity: 200 layers per hourSupported pallet: Eur-EPAL 800x1200 mmInstalled power: 73 kWWorking plane height: 800 mmAdvanced Automation & Control SystemsThe palletizer is controlled by a Siemens PLC, providing dependable automated coordination of palletizing movements and end-of-line material handling. The electrical system is configured for three-phase operation, with a rated voltage of 390 V and a frequency of 50 Hz. Full-load current is rated at 60 A.An automatic layer-sheet inserter is included. This system places interlayer sheets between product layers to improve load separation, support pallet stability, and protect packaged PET bottles during handling and transport.Production Line Integration CapabilitiesThis automatic palletizer is suitable for integration at the end of a used bottling line, after secondary packaging equipment such as shrink wrappers, case packers, or bundle handling conveyors. It is designed to stack packaged PET bottles onto Eur-EPAL pallets measuring 800x1200 mm.Its application is appropriate for beverage production lines handling natural water, carbonated water, soft drinks, milk, beer, wine, spirits, oil, and preserved products. The Monocolumn configuration supports organized pallet formation for industrial packaging operations where reliable transfer from packaging machinery to warehousing or dispatch is required.Machine Condition & Maintenance HistoryThe machine is reconditioned and ready for operation. It is supplied with a 6-month warranty and compatible spare parts are available. This second hand palletizer is intended for buyers seeking a prepared end-of-line solution for integration into an operating production line.Before installation, the purchaser can verify the selected pallet pattern, product pack configuration, conveyor interfaces, and layer-sheet specification to ensure compatibility with the intended packaging process.Operational Performance & VersatilityThe Sidel Monocolumn palletizer handles PET bottle packs and provides automatic layer formation and pallet stacking. The integrated layer-sheet application system is particularly useful where stable, separated pallet layers are required for storage and transport.With a maximum output of 200 layers per hour, the machine supports efficient downstream handling in beverage production and other packaged-product applications. Its automated operating concept helps maintain a consistent palletizing process while reducing manual pallet-loading activities.Installation Requirements & Site PreparationIn... Rcodpfx Aozvprrjlaof

Condition: used, Year of construction: 2004, machine/vehicle number: PAL49, Used Keber PALPACK DS Palletizer The Keber PALPACK DS is a conventional automatic palletizer designed for end-of-line carton palletizing in beverage production and industrial packaging environments. This secondhand solution streamlines the final stage of a used bottling line by arranging sealed cartons into stable layers and placing them onto pallets according to predefined stacking patterns. Engineered for reliable throughput and smooth handling, it helps producers prepare loads for wrapping, storage, and transport with consistent quality and minimal operator intervention. Manufactured by Keber, the PALPACK DS integrates seamlessly into complete packaging lines processing glass bottles packed in cartons. Typical applications include bottled beverages in standard retail formats such as 0.75L, 1.0L, and 1.5L. Its practical layout and robust construction support continuous-duty operation in demanding facilities where uptime and pallet stability are essential. Whether upgrading an existing used bottling line or expanding capacity, this palletizing system offers dependable performance in a compact, operator-friendly footprint. Technical Specifications & Performance Data Manufacturer: Keber Model: PALPACK DS Machine type: Conventional automatic palletizer for cartons Year: 2004 Container handling: Designed for glass bottles packed in cartons Bottle formats: Compatible with 0.75L, 1.0L, 1.5L bottle formats (cartonized) Pallet format: Eur-Epal pallet, 800×1200 mm Advanced Automation & Control Systems The PALPACK DS enables automated layer forming and orderly pallet build-up for consistent, repeatable results. Its end-of-line control logic coordinates carton infeed, layer positioning, and pallet changeover, helping operators maintain stable stacks for downstream wrapping. The design supports clear operator access, safety interlocks, and straightforward adjustments to maintain efficiency during product runs and format changes. Rjdpfx Aoxywafelascf Production Line Integration Capabilities This palletizer is positioned downstream of a hot-melt case sealing stage and upstream of pallet wrapping, enabling a continuous, automated flow from packed case to finished pallet. It is compatible with standard conveyor systems and integrates into used bottling line layouts handling glass bottle cartons. The system is suited to beverage production where multiple bottle sizes are packed into cases and prepared for distribution. Typical integration examples include: Upstream: hot-melt case sealer (e.g., TE-CO 607-98) Downstream: automatic pallet wrapper (e.g., Imballaggi Service Group EASY WRAP 2000 A) Machine Condition & Maintenance History This equipment is listed as ready for operation within a complete line context. It is presented as a functional, secondhand palletizer suitable for immediate integration into industrial packaging and beverage production workflows. Operational Performance & Versatility The PALPACK DS focuses on carton palletizing for glass bottle packaging, supporting stable, repeatable pallet loads that protect product quality during handling and transport. Its design emphasizes consistent layer formation, dependable transf...

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: R94, Used Tetra Pak TBA 19 200ML Slim Filling machineTechnical Specifications & Performance DataThis aseptic carton filling machine is a second hand Tetra Pak TBA 19 V10 configured for the 200 ml Slim format. It has been workshop checked, fully tested, and received a total refurbishment in 2026 to ensure reliable performance for industrial packaging and beverage production environments. Ideal for a used bottling line upgrade or as a standalone aseptic packaging cell, it integrates smoothly with downstream equipment for complete end-of-line solutions.Manufacturer: Tetra PakModel: TBA 19 V10Machine type: Aseptic carton filling machineYear of manufacture: Approx. 1996Running hours: Approx. 26,000Format/volume: 200 ml SlimRefurbishment: Total refurbishment completed in 2026General condition: Workshop checked, fully tested, good working orderAdvanced Automation & Control SystemsEngineered for consistent aseptic performance, this filling machine features an integrated control philosophy typical of Tetra Pak systems, supporting efficient start-up, stable throughput, and simplified format handling for the 200 ml Slim line. Centralized operator control via HMI streamlines operations and facilitates guided changeovers and diagnostics. The machine has been fully tested under workshop conditions, with live online test runs available to verify automation responses and process stability using water-filled packages. Safety interlocks and guarding are present across the production cell to protect operators during operation and maintenance.Production Line Integration CapabilitiesThe TBA 19 V10 can operate as a standalone aseptic filler or as part of a complete used bottling line for beverage production. The included conveyor set—approximately 30 meters with four 90° curves and two chain tensioners—ensures smooth transfers to downstream packaging modules. The TCBP 70 Multiinfeed tray packer is compatible/optional for wrap-around applications, while the TTS 51 tray shrink wrapper provides flexible secondary packaging options.Machine type/categoryManufacturer / ModelYearFilling MachineTetra Pak TBA 19 V101996 (approx.)Straw ApplicatorTetra Pak TSA 21ConveyorsApprox. 30 m with 4 x 90° curves, 2 x chain tensionersShrink WrapperTetra Pak TTS 51Case/Tray PackerTetra Pak TCBP 70 Mul... Rodpfxjzrgqwo Alajcf

Condition: used, Year of construction: 2009, Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SIPA (Italy) - Model: SFR 8 - Year of manufacture: 2009 - Machine type: rotary stretch-blow moulder for PET bottles - Number of cavities: 8 - Output: up to 12,400 bottles/hour - Bottle formats: 0.5 l, 0.75 l and 1.5 l - Neck finish: 28 mm / 1881 (short neck) - Electrical connection: 400 V, three-phase - Total connected load: 147 kW - Location: Germany Included in the sale - Four sets of blow moulds with eight cavities each: two sets for 1.5 l, one for 0.75 l and one for 0.5 l - Preform feeding system - Chiller Rsdpfx Alozu Icyoajcf - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Not included - Preform hopper (can be custom-made) - High-pressure compressor Condition The machine is in very good condition and has been maintained regularly by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 10 and 14 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: excellent (used), Gas heated nut roaster direct from closed granola / breakfast cereal factory. Rarely available. Rsdpfxoy Hmv Ss Alajcf

Condition: excellent (used), Rare opportunity. Complete industrial puff pastry production line - from bulk flour storage to laminated dough. Comprising two 75 cubic metre Slob outdoor flour silos with automatic transfer, weighing and dosing system,, two stainless steel Diosna WV 240 A Premium mixers with four bowls, Syspal 2024 1 tonne rated bowl tipper and complete AMF Bakery Tromp continuous puff-pastry laminating line. Currently installed and in daily production producing 2 tonnes per hour at 90/100 laminations. Videos available upon request. Rcedpszvilfofx Alaef

Condition: excellent (used), New generation Lutetia Type 40 vacuum tumbler direct from recently closed cooked meats factory. In beautiful condition. Rcjdpfx Alezika Doaof

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Redpfxevva Hko Alaocf

Year of construction: 2014, condition: ready for operation (used), A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories. Rcjdpfx Aslcdf Djlajf

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 558.123E / 1113. 2459 E, type of input current: three-phase, total length: 4,500 mm, total height: 960 mm, total width: 2,010 mm, overall weight: 3,300 kg, warranty duration: 6 months, input current: 400 A, year of last overhaul: 2026, product height (max.): 170 mm, product height (min.): 30 mm, product length (max.): 400 mm, product length (min.): 100 mm, S30 GBK 220 Packaging Machine + Selectra SL 30 Hartmann Slicer By combining the functionality of the S30 GBK 220 packaging machine with the efficiency of the Selectra SL 30 slicer, we obtain an extremely efficient process line that enables the automation of production processes. Innovative mechanical systems supplied by GHD HARTMANN ensure smooth, continuous, and efficient operation, making them suitable even for factories producing bakery products on a large scale. S30 GBK 220 GHD Hartmann Packaging Machine Device performance: 30-45 cycles/min, with stepless adjustment (performance depends on the specific product). Technical data: dimensions: length: approx. 4500 mm, width: approx. 2010 mm, table height: min. 960 mm, height: min. 2080 mm, weight: 1700 kg, product dimensions: length: 100 - 400 mm, width: up to 260 mm, height: 30 - 170 mm (other dimensions upon request), Rodezwup Sepfx Alajcf capacity: 1800 - 2700 packages/hour. GHD Hartmann Selectra SL 30 Band Slicer A fully automatic slicer equipped with durable band knives with a length of 176 inches, stretched between two chrome-plated drums. Technical data: performance: up to 3800 loaves/hour (depending on the type of bread), admissible product dimensions: length: 160 – 400 mm, height: 50 – 180 mm, overall machine dimensions: 3145 x 1150 x 2600 mm, weight: approx. 1600 kg.

Condition: used, Year of construction: 2010, machine/vehicle number: PR28, Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic System dehumidifier; Plastic System hopper H6000H; Plastic System mold-area dehumidifier DSH 2004 MIC DISP; conveyor; palletizing systemMaterial processed: PETAdvanced Automation & Control SystemsThe cell integrates a Sytrama REV 156 PET robot for automatic take-out and part handling, supporting stable cycle times and consistent product quality. The machine is equipped with an electric charging unit and hydraulic accumulators for fast, repeatable injection phases. Operator-friendly controls and interlocked safety guards help streamline setup and routine operation.Automated take-out and transfer via Sytrama robotAccumulator-assisted injection for stable, fast cyclesIntegrated dehumidification and material handling for resin conditioningElectrical specifications: 400 V, 50 HzEngineered for quick, repeatable mold changes and efficient maintenance accessProduction Line Integration CapabilitiesThis injection cell can operate as a standalone preform production unit or be integrated upstream of stretch blow molding in a PET production line. The included dehumidifiers, hopper loader, conveyor, and palletizing system simplify in-plant logistics and align with broader bottling equipment and packaging machinery workflows.Standalone or inline operation with PET packaging linesDehumidification and hopper loading optimize PET resin preparationConveyor and palletizing system support downstream handling and warehousingIdeal for beverage production environments targeting consistent preform supplyMachine Condition & Maintenance HistoryThis second hand injection molding machine is presented in operational condition and ready for immediate use after standard site preparation and commissioning. The core press is year 2014, with the SACMI mold and auxiliaries from 2010, providing a balanced mix of robust mechanics and proven proce... Rcedpfx Alszktdbeasf

Condition: used, Year of construction: 2007, Overview Rcsdpfjzh Ifusx Alasf This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Year of construction: 2010, We offer a used FUJI FW3710 Wrapper VI a horizontal packaging machine of the Horizontal Form Fill-Seal / HFFS type, designed for automatic packing of products in film. The machine is suitable for production plants that require an efficient and repeatable system for individual product packaging. An HFFS machine forms the package from a roll of film, feeds the product, seals the package and cuts off the finished pack. This type of solution is commonly used for packing food products, portioned products, ready-made goods and various items requiring an aesthetic and sealed film package. Redpfxezhm Saj Alascf The FUJI FW3710 Wrapper VI can be used as a standalone packaging machine or as part of a larger production line. The construction of this type of machine allows continuous industrial operation, reduction of manual work and improved repeatability of the packaging process. The FUJI packaging machine is a good solution for companies looking for a used flow-pack machine to automate the packaging of individual products. The unit can be used in the food industry, manufacturing, co-packing and production lines where fast film packaging is required. Technical data: Manufacturer: FUJI Model: FW3710 Wrapper VI Type: horizontal HFFS / flow-pack packaging machine Machine type: Horizontal Form Fill-Seal Machine Condition: used Main advantages: horizontal HFFS / flow-pack packaging system automatic forming, sealing and cutting of the package packing products in film from a roll repeatable individual packaging process can be used as a standalone machine or as part of a production line solution for packaging automation suitable for food and industrial products renowned FUJI manufacturer construction designed for industrial operation Applications: packing food products packing portioned products packing ready-made goods packing individual products flow-pack film packaging production and co-packing lines automation of the packaging process packing products requiring an aesthetic film package

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Rcodpfspg Er Nsx Alaef

Condition: good (used), Complete line available which was producing toffee apples for the leading producer in England. Toffee apples and candy apples were supplied to several leading supermarket chains. Line consists of cooking vessels for the toffee, robotic pick and dip lines to insert the sticks into the apples, pick them up, dip them in the toffee and then place them onto the cooling belt then the products are conveyed into flowwrappers. Videos available upon request. Rsdpfx Aepitkkolajcf

Condition: excellent (used), Year of construction: 2019, 2 units in stock, both were only in use for a short contract. Loading basket 1600mm by 800mm Programmable controls. Rcjdpfxjramamo Alaef

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Rcedjrfdq Uspfx Alasf

Condition: good (used), R245 in lovely condition. Was packing sauces. Currently has no tooling so customer can adapt to suit their needs. Comes with frame to mount date coders on but without coders. 422mm bed width. Rcsdpfxsq Dagbs Alajf

Condition: excellent (used), We have 3 x identical MR600 mixers for sale. All bought new in 2016, available with optional tote bin hoists. These are in beautiful condition and available to buy straight away. Rcedpen Tr Stsfx Alaof

Year of construction: 2016, condition: excellent (used), High throughput twin lane tray sealer. Has been packing layered salads in round bowls. Cost in excess of £300k when new in 2016. Rjdpfxjilfkgj Alaocf

Condition: excellent (used), Flake ice machine on stand, can produce up to 3.2 tonnes per day of flake ice. Lovely condition. 3 in stock. Rodpfoh Nnd Rex Alajcf