Used Edwards Pearson 100/3100 for sale (24,257)

Condition: good (used), Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system Nwjdjh Uhmkjpfx Abzei -Designation: HSD A3-100, HSD P3-100, P3-100, 1- 4.5 bar -Diameter: 19mm -Length: 45mm -Number: 21 pieces available -Total Cost -Total weight: 0.5kg

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, printed circuit board electronic module -Manufacturer: Stiefelmayer, circuit board from coordinate measuring machine Stiefelmayer C 100 413514 -Type: 413100-89 -Dimensions: 115/80/H55 mm -Weight: 0.2 kg Nwsdjw S E Eujpfx Abzoi

Condition: good (used), Clamping plate with grooves, marking plate, measuring plate, measuring table, straightening plate, marking plate Njdpsndzycsfx Abzewi -Clamping surface: 2995 x 2500 mm -Clamping plate: with grooves, no T-slots -Height: 300 mm -Groove width: 10 mm -Groove spacing: 200 mm -Transport dimensions: 3100/2500/H300 mm -Weight: 5000 kg

Condition: used, Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm Nwedpfxjd Tdz Nj Abzoi -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm -Transport dimensions: 4140/450/H250 mm -Own weight: 180 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,352 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200x50-10, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,620 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, sideshift, COMBILIFT C4000 – 2016 | 4352 MTH | DIESEL | DUPLEX 4050 mm Ready to work from day one – no investment, no risk --- ### Why this forklift? Are you looking for a machine that will not stop your production? ⚙️ This COMBILIFT C4000 is a proven unit after a full service – ready for immediate operation, with no hidden costs. ✔ Fully serviced (oils, filters, complete inspection) ✔ Technical & visual condition: like new ✔ Only 4352 MTH – low operating hours ✔ New tyres – no additional investment required --- ### Key specifications ✔ Capacity: 4000 kg ✔ Diesel drive ✔ Duplex mast – 4050 mm ✔ Fork positioner: 3100 mm ✔ Forks: 1100 mm ✔ Full cabin --- ### Technical details ✔ Year: 2016 ✔ Weight: 6400 kg ✔ Load centre: 600 mm ✔ Lifting height: 4050 mm ✔ Dimensions: * Length: 1230 mm * Width: 2620 mm * Height: 2400 mm ✔ Tyres: super elastic (new) ✔ Equipment: cabin, wide fork positioner ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion --- Njdpfxjzk Ikcj Abzjwi ### Ideal for ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industry ✔ Handling of long loads ✔ Indoor & outdoor use --- ### What you get Not just a used forklift – but a ready-to-work solution: ✔ Fully tested before sale ✔ Ready for immediate use ✔ Online presentation available ✔ Transport available --- ### Why FT LOGISTICS? We deliver machines that work – not ones that sit in the workshop. 🚀 ✔ 100+ machines available ✔ In-house service & preparation ✔ Pan-European experience ✔ Hundreds of satisfied clients

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Nwedpsyx Na Rofx Abzoi

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 3-meter plate shear from Baykal Nwedszgt Tbjpfx Abzsi Type: HGL 3100 x 8 Capacity: 3100 x 8 mm (steel) Electric NC back gauge Year of manufacture: 2006

Condition: good (used), machine/vehicle number: 0106, Year of construction: 2005, Dana 1204FT20213-100 from Uniktruck Nwsdpfxsyug Ucs Abzei

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Nwedpfxoyku U Nj Abzoi Cutting height 45 mm Motor output 1,8 kW machine weight ab. 500 kg

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE Nodpoxaa Eqjfx Abzewi ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: new, pressing force: 100 t, Equipment: CE marking, Offer: "The All-rounder" For economical bending with premium features: 4-axis back gauge (expandable to 5 axes), BendGuard safety system, ACB Laser angle measurement system, bending aid, and efficient on-demand hydraulic drive. The images shown are examples and may not reflect the standard scope of the offer. For offer details and further information, please contact us. About the machine: Do you need a reliable bending machine that delivers premium quality even with a limited budget? Then the TruBend 3000 is the ideal solution for you. The focus here is on what really matters: economy, stable processes, the highest precision, and proven TRUMPF safety standards. With its robust system design, intelligent premium features, and consistently stable operation, the TruBend Series 3000 offers optimal conditions for productive manufacturing. It is ideal for complex bent parts in small and medium batch sizes – even under economic pressure. Precise bending – The ACB Laser angle measurement system automatically ensures precise angles with ±0.3° accuracy. Nwsdpfx Aezhu Amsbzji Productive work – The on-demand hydraulic system and intelligent bending aid increase your productivity and noticeably reduce the workload on your team. Flexible programming – With TRUMPF Software TecZone Bend, you can program offline, and the machine continues to produce in parallel. TRUMPF Service – Bending tools, training, and technical support – we support you worldwide. With us, you get more than just a machine: a complete ecosystem that optimally supports your bending production. Further technical data can be found in the data sheet or on our website. If you have any questions, please contact us. P.S.: With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we also support you in overcoming financial challenges.

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG TOC/TNb analyzer, multi N C 3100 Model: multiNC3100 Condition: Used Technical specifications: 230V AC 50/60Hz 1000VA General: Nsdpezh Irusfx Abzowi Operating temperature +10 to +35 °C (air conditioning recommended) Maximum humidity 90% at 30 °C Air pressure 0.7-1.06 bar Storage temperature +5 to +55 °C Humidity during storage 10-30% (use desiccant) Altitude (maximum) 2000 m Accessories: Documentation Power cord Software

Condition: used, Year of construction: 2002, sheet width 3000 mm plate thickness 4,0 mm distance between columns 3080 mm max. 1000 mm Cutting length variabel mm cutting gap adjustment variabel mm connected load 11,0 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 3,7 x 1,9 x 3,94 m Hydraulic guillotine shear with Nodpjzgihbjfx Abzjwi - Control system: Siemens OP7 - Cutting gap adjustment - Cutting length adjustment - Shadow line lighting - Support arms - Sheet support system - Sheet conveyor belt - Scrap diverter

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Nodpfxsvvkaze Abzowi Storage location: Nattheim

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Nsdpfx Aoyl Tiuebzjwi Workpiece clamping: pneumatic

Condition: used, Cutting length: 3050 mm Workpiece clamping: handwheel Extraction system: yes Nodpfx Asm H Uxysbzowi

Condition: excellent (used), Year of construction: 2013, Technical specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment Adjustable parallel stop NC control: Maper by BAYKAL Cuts per minute: 12 min. Sheet metal support device Nodpfxozfx Nfj Abzewi Side protection grilles Motor power: 22 kW Dimensions (length x width x height): approx. 4000 x 3000 (1800) x 2000 mm Weight: approx. 9.7 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake Manufacturer: Bystronic Model: XACT Smart 160/3100 Serial number: XACT 22040SE Nwjdpfsy U I Tbox Abzsi Year of manufacture: 02/2022 Technical specifications: Maximum pressing force: 1600 kN Maximum working length: 3100 mm Maximum stroke: 200 mm Rapid traverse speed: 140 mm/s Working speed: 1–10 mm/s Return speed: 115 mm/s Machine weight: 10,500 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 410 mm, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, overall weight: 9,800 kg, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S660W, working width: 3,700 mm, bending force (max.): 175 t, back gauge: 750 mm, distance between stands: 3,200 mm, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery Nwedpfxoxddw Ee Abzji 🔑 Summary This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Elgo, controller model: P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 8 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 13 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 12,000 kg, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, number of support arms: 2, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, 2021 MVD B13-3100 Guillotine Shears with Elgo P40T Control – Very Good Condition For sale is a 2021 MVD B13-3100 Hydraulic Guillotine Shear, equipped with the advanced Elgo P40T CNC Control. This machine is in very good condition, having been installed in 2021. The MVD B-Series shears are built for precision, productivity, and reliability, offering powerful hydraulic cutting performance with CNC-controlled accuracy. Perfect for fabrication shops, subcontractors, and sheet metal production. Machine Make: MVD Machine Model: B13-3100 Machine Type: Hydraulic Guillotine Machine Capacity: 3m x 13mm Machine Year: 2021 ✅ Key Features 3100 mm cutting length – handles large sheet sizes with ease 13 mm sheet capacity (mild steel) – robust heavy-duty performance Elgo P40T CNC Control – programmable backgauge, stroke, and cutting settings Hydraulic swing beam design – consistent and accurate cutting results CNC backgauge system with motorised adjustment Nwodpfoxddzqjx Abzoi Rugged welded frame for stability and precision Front sheet supports and squaring arm for operator convenience Safety light guards for operator protection Very Good condition – 2021 model, very low hours 📐 Technical Specifications – MVD B13-3100 Guillotine Shears Cutting Length: 3100 mm Capacity (Mild Steel): 13 mm Capacity (Stainless Steel): ~8 mm Backgauge Travel: 1000 mm (CNC controlled) Control: Elgo P40T CNC touchscreen – programmable stroke, backgauge, cutting angle Stroke per Minute: 8–20 (adjustable) Cutting Angle: 0.5°–2.5° adjustable Throat Depth: ~100 mm Main Motor Power: 22 kW Hydraulic System: High-pressure precision hydraulics Dimensions (L×W×H): ~4000 × 2200 × 2100 mm Weight: ~12,000 kg 🌍 Condition Year of Manufacture: 2021 Control: Elgo P40T CNC Model: MVD B13-3100 Condition: Very Good – lightly used Ready for inspection and immediate delivery 🔑 Summary This 2021 MVD B13-3100 Hydraulic Guillotine Shear with Elgo P40T CNC Control offers 3100 mm cutting length, 13 mm capacity, and CNC accuracy. A modern, reliable, and powerful sheet metal cutting solution ideal for fabrication, subcontracting, and production facilities. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm Nwedpfozfqf Sjx Abzei control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Condition: used, Maja RVE 3100 S Flake Ice Machine The Maja RVE 3100 S flake ice machine is capable of producing up to 3,000 kg of flake ice per day. Its compact design requires minimal floor space, making it ideal for facilities with limited production areas. This flake ice machine must be connected to an external refrigeration system with a condenser. The flake ice produced can be used in a wide range of processing applications, including the cooling of meat and dough during production. The machine is constructed entirely from stainless steel, ensuring excellent hygiene, durability, and ease of maintenance. Specifications: - Production capacity: 3,000 kg/day - Ice temperature: -7°C - Voltage: 400 V (3 + N, 50 Hz) - Refrigeration system capacity (-20°C / +40°C): 16.2 kW - Weight: 230 kg - Year of manufacture: 2007 Nwedpfjzdadpex Abzei - Machine dimensions (W × D × H): 1,450 × 760 × 590 mm

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Nwedpfszc Iztjx Abzei

Condition: ready for operation (used), Indramat KDV 2.3-100-220 / 300-000 Power Supply SN:248468-02566, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Nodpex Etyhjfx Abzjwi

Condition: ready for operation (used), Fanuc A06B-0757-B200#3100 AC spindle motor, mounting hole spacing: 175x250 mm, drive shaft diameter: 48 mm, used, in good condition, 100% functional. NOTE: Please request a separate quote for packaging and shipping costs! Nsdpfei D H Nkjx Abzswi