Used Emt Asi160M38 for sale (240)

Condition: good (used), Year of construction: 2002, functionality: fully functional, High Speed Moulder infeed Full automatic with automatic board turner. Giedpfx Ajv Hhy Hslmot Full documentation. Line is now dismantled and ready to load.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% Giodpodwktkefx Almst - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Year of construction: 2015, condition: like new (used), Item: M-09300-Combi-Packer STAINLESS STEEL COMBI PACKER Multipack Producer:Sema Systemtechnik Machine Model: 1400s-FN-TPW Year of production: 09/2015 Complete Stainless Steel Gsdpsh Hq U Uefx Almoit That is not used long time, like new one!

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: Gijdpfx Alschuvremst + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2026, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,200 mm, feed length X-axis: 4,700 mm, feed length Z-axis: 2,000 mm, faceplate diameter: 4,000 mm, feed rate X-axis: 25 m/min, feed rate Z-axis: 15 m/min, rotary table diameter: 4,000 mm, rotational speed (max.): 100 rpm, torque: 128,000 Nm, spindle speed (min.): 3,000 rpm, table load: 50,000 kg, power: 100 kW (135.96 HP), Equipment: rotational speed infinitely variable, TECHNICAL DATA: Machining diameter 4200 mm Max. workpiece height 3000 mm Max. workpiece weight 50,000 kg Faceplate diameter 4000 mm Faceplate speed range 0-30/0-100 rpm Max. faceplate torque 128,000 Nm Main drive power 75/90 kW EQUIPMENT: -1-2 support configuration -Machine enclosure -Chip conveyor -Cooling water preparation -C-axis Gijdeq Ny Dtspfx Almjt -Fork head -Driven tools/BT50 -Bellows cover -Central lubrication SKF/VOGEL -12-month warranty -Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard CONTROL: FAGOR or SIEMENS OTHER: Geometry acceptance according to DIN 8609-3

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL Gsdpsd I Au Rjfx Almeit -2 step main gear -24 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600(1800*)mm Max. workpiece height 1000(1500*)mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200(0-315*)rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support Gijdpfocx Rv Hsx Almet -Zentral lubrication SKF/VOGEL -Version .300 - 2(3*) step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: like new (used), Year of construction: 2026, TECHNICAL DATA: Machining diameter 2000mm Max. workpiece height 1200mm Max. workpiece weight 8000kg Faceplate diameter 1800mm Faceplate speed range/4 automatic steps 0-210rpm Max. faceplate torque 31500Nm Main drive power 55kW EQUIPMENT: -4-station turret or quill support with 2 Capto clamping units -Central lubrication SKF/VOGEL -Commissioning including training -12-month warranty -Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE standard OPTIONS: -Tool holders -Tool change system (10 stations) -Machine enclosure -Chip conveyor -Cooling water preparation -Side support -Machine version with quill and 2x Capto C6 -... CONTROL: CNC cycle control Fagor 8037TC/8055TC* or Siemens Gedpfx Aljf S Hcyomoit OTHER: CE Declaration of Conformity Geometry approval according to DIN 8609-2

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret -Version .300 - 2 step main gear Gedpfx Alscxi A Semeit -Side support -4 axis digital display (ACU-RITE / FAGOR) -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm CONTROL: kconventional/SPS Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, Machine NEW! Geometry acceptance according to DIN8609 Warranty 12 months for all damages Control:conventional/SPS Siemens faceplate control 4-axis digital display Fa.Fagor/ACU-RITE or Heidenhain complete electrical equipment 230/400V,50Hz,german make,CE-Norm Technical data: Max. Workpiece dimensions: - Diameter mm 3200 Giedpfx Aocht Tnelmot - Height mm 1600(up to 2600 possible*) Max. Workpiece weight kg 16000 Face plate diameter mm 2800 Max. stroke length - horizontal mm 1720 - vertical mm 1200 Number of stages of faceplate rotation 18 Face plate speeds PLC Siemens or stepless(2 steps) Lenze control rpm 1,6-63/0-80 Support working feed number of steps 18 Speed of cross beam adjustment mm/min. 360 Max. Support line adjustment speed mm/min. 2000 Max. Faceplate torque kN/m 67 Main drive power kW 55/75 Dimensions (LxWxH) mm 5490x7075x5100 Weight kg 43.000

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty Gsdpfx Aercivgslmoit -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: refurbished (used), Year of construction: 2005, NEW MACHINE TECHNICAL DATA: Working diameter 3200mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2800mm Face plate rotation speed 0-80U/min Max. torque on face plate 67000Nm Giedpfx Aljlin Rcomst Performance of main drive 75kW SETTINGS: -2 supports -3-fold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing inkl. -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR 8055TC OTHER: Geometrie-Abnahme nach DIN8609 CE Deklaration

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Cycle control Giedpfed Ivynox Almet OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 3200mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Gedpfx Ajcx Rvyslmsit Face plate diameter 2800mm Face plate rotation speed 0-80U/min Max. torque on face plate 67000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-fold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 2500mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2240mm Face plate rotation speed 0-100U/min Max. torque on face plate 50000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-ffold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing -chip conveyor -cooling water preparation -Turret -driven tools Gisdecxlylspfx Almot -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609

Condition: excellent (used), Here we offer 1800 a Labinot tempering system TS. Labinot tempering system TS 1800 Gjdpfx Aljd Huqhjmsit 400V of 3n,50hz, 3 x 35 AT Weight: approx. 920kg Type: TS 1800 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), Features: Giodpfx Alow Uqdzjmjt Large feeder capacity Simultaneous assembly of different products Modular machine concept allowing for easy upgrades Changeover with little to no downtime Specifications: Productivity Max placement speed/cycle time: 15,000 cph / 0.24 seconds Speed according to IPC9850: 12,600 CPH Changeover standstill time

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, AUTOMATIC L-SEALING MACHINE WITH INTEGRATED TUNNEL MODEL F-AUTO 3550 COMBO from 2011 Max. product length: 500 mm Max. product width: 350 mm Max. product height: 150 mm Film type: Polyolefin - PE Infeed and outfeed height: 900 mm + 50 mm adjustable Output (A4 format): Depending on the product – up to 35 packs/min Film roll diameter: Int. 76 mm / ext. 350 mm Gijdpfx Asw Nx Nbolmst Max. roll width: 550 mm Voltage and power consumption: 230V/400V, 3-phase, 8 kW Pneumatic supply: 6 bar Weight: 700 kg Dimensions (LxWxH): 2700 x 1200 x 1550 mm

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Gsdpfsv Rpxlox Almsit Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Gisdpeu Smd Eofx Almet The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials Gsdexqhnzopfx Almjit

Year of construction: 2020, operating hours: 100 h, condition: excellent (used), functionality: fully functional, overall weight: 300 kg, total length: 1,330 mm, total width: 840 mm, total height: 1,870 mm, compressed air connection: 6 bar, type of input current: AC, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. Godsxuqtbspfx Almsit - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) Godounh H Sopfx Almoit - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, functionality: fully functional, Year of construction: 2025, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system Gsdpfswkpwajx Almoit - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: new, Year of construction: 2021, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, working range: 400 mm, load capacity per stand: 5 kg, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design Gisdpet Dih Nefx Almet • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)