Used Engel Es 650/100Hl for sale (11,039)

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights Pgjdpfxjwx Dbps Abyel - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space length: 6,550 mm, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Steel welded construction made of welded longitudinal members and pierced Z-shaped cross members, close cross member spacing for high ground load capacity * Ramp storage between the longitudinal members behind the axle assembly, two receiving pockets for one access ramp each below the loading floor, with a locking plate in the head frame at the rear Underrun protection: * Complies with EC regulations Front coupling: * Coupling with single-sided operation Rear support: * Two adjustable drop legs Axles: * 2 x 10 t air suspension axle assembly, manufactured by SAF, drum brakes approx. 300 x 200 mm, wheel connection center-mounted for twin tires, ABS, total suspension travel approx. 200 mm, of which lifting is approx. 140 mm and lowering is approx. 60 mm, controlled via hand lever with detent function Tires: * 8-ply, 235/75R 17.5 - manufacturer of our choice, on steel rim 6.75 x 17.5, with offset mounted Splash guards: * Made of PVC in front of and behind the axles, complies with EC regulations Pgodsy Up Tiopfx Abysl Load securing: * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached to the closed side panels, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t * Recess pockets for lashing bars 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed Braking system: * Air brake system complies with EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame * Front panel removable from the 25 mm side panel Lighting: * Lighting system complies with EC regulations, 24 volts, multi-chamber tail lights, license plate lights, side marker lights and position lights at the rear, connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs Accessories: * 2 chock blocks with holder * Rotating beacon pluggable at the rear * Delivery of an additional 40 mm drawbar coupling (GVW max. 13,500 kg) Paint: * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL 9011 graphite black * Side panels: RAL 9010 pure white * Kingpin bars: RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Add-on parts: galvanized / KTL black Includes special accessories: * Rear extension by approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm, with screwed drawbar eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 lashing bars made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20" container * Container locks 1 x 20" extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps, load capacity per pair approx. 9,000 kg * 4 x s

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights Pgjdpfjwt Iyljx Abyol * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: new, maximum load weight: 37,350 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous crossmembers for high ground and point load capacity, with a heavy-duty outer frame. * Loading platform at the rear as a steel welded structure with two welded-in tracks made of 5-hole steel sheet (hole pattern System Lohr/Rolfo) with a length of approximately 2,250 mm, hydraulically lowerable by approximately 350 mm. * Integrated loading platform at the rear of the vehicle, approximately 1,500 mm, hydraulically extendable as a steel welded structure with 5-hole steel sheet (hole pattern System Lohr/Rolfo) cover, light fitting, and 2 ramp compartments and ramp supports. * The drive and control of the rear section are provided by an electric hydraulic unit mounted in a stainless steel box on the left of the chassis, with a radio remote control. * Power supply via the vehicle battery of the towing vehicle. * NATO socket on the front wall, without connecting cable to the tractor unit. Fifth wheel coupling: * 2-inch kingpin, replaceable from below. Under-ride protection: * According to EC, permanently mounted. Support legs: * 2 x 12 t support winches with a 2-speed gearbox. Pjdpfjy Up S Sjx Abysgl Axles: * 3 x 10 t air-suspended axle unit, manufacturer SAF with disc brake approximately 370 x 45 mm, ABS, wheel connection 10-hole center-mounted ET120, total stroke of the air suspension approximately 200 mm, of which lifting approximately 140 mm and lowering approximately 60 mm, control of the air suspension via hand control with stop function. Steering axle: * 3rd axle as a trailing steering axle with manual and automatic reverse steering lock. Lift axle: * 1st axle automatically liftable, also switchable via operation on the chassis frame or via PIN 12 of the light socket. Tires: * 6 tires, 445/45R19.5, manufacturer of our choice, mounted on rim 14.00X19.5, 10-hole ET120. Fenders: * According to EC, 1/4 PVC fender in front of and behind the wheels of the 1st axle in front and behind, 2nd and 3rd axles in the rear. Tire chock holder: * None Braking system: * Two-line braking system according to EC with EBS, automatic load-dependent control. * Spring brake accumulator as parking brake acting on 2 axles, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the tractor unit. Manufacturer Wabco. Lighting system: * According to EC, 24 volts, multi-chamber rear lights, license plate lights, LED side marker lights, LED position light white in front and LED side marker lights at the rear, 15-pole socket and 2x7-pole sockets permanently mounted on the front crossmember, without connecting lines to the tractor unit. Load securing: * 9 pairs of folding lashing rings evenly distributed, tensile force approximately 8 tons. * 7 pairs of folding lashing rings evenly distributed, tensile force approximately 2.5 tons. * 2 pairs of folding lashing rings at the rear of the vehicle, tensile force approximately 2.5 tons. * In the outer frame, holes for lashing straps at approximately 500 mm intervals. Lashing stakes: * 16 lashing stakes approximately 100/40 mm, approximately 800 mm usable length. Lashing stake pockets: * 8 each on each side embedded in the outer frame. * 4 rows of stake pockets transverse to the loading area. Fl

Condition: good (used), Year of construction: 1991, For sale: control boards for EC88/CC90 controllers, removed from operational Engel injection molding machines. Price for all: 1000 EUR It is possible to purchase individual boards. Pgjdpfexfzb Rex Abysl PRICE REDUCED FROM 1000 TO 800 EUR!!!

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm Psdezadr Nepfx Abyjgl - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: not inspected (used), Year of construction: 2010, machine/vehicle number: 61015538, This Engel injection molding machine, model victory 1050/220 tech, manufactured around 2010, will be auctioned off in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." along with an MB Conveyors conveyor belt, manufactured in 2012, and a motan mixing unit, manufactured in 2024. You can find this and many other items from the field of injection molding technology, production & workshop equipment, temperature control units, lifting technology, eroding machines, measuring instruments, transport & social area equipment, etc. on our RESTLOS auction platform! Engel injection molding machine Nameplate data: Manufacturer: Engel No.: 177100 Year of manufacture: 2010 (partially covered, presumably) Type: victory 1050/220 tech Weight: 12,200 kg motan mixing unit Nameplate data: Manufacturer: motan holding Designation: Mixing unit Model: Mixing module - 2l - MB Rated voltage (UN): 24 V DC Control voltage (Us): 24 V DC Current (IL): 2.7 A Max. weight (mmax): 8 kg Year of manufacture: 2024 Serial number (SN): 677A01A24 14293 RA: BM02A Pgedpfx Abjy Uzdaeyol CE marking: present UKCA marking: present MB Conveyors conveyor belt Nameplate data: Manufacturer: MB Conveyors Model: N-CPR LOW-COST Year of manufacture: 2012 Registration No.: B20032 Voltage: 400 V CE marking: present as shown in the pictures without any other items shown in the pictures Functionality untested

Condition: used, Manufacturer: Tennant Company (USA) Model: M20 Pgedpfx Aswf E Drebyel Type: Industrial Scrubber-Sweeper (combination machine) Power source: Diesel, LPG, or Battery (depending on version) Cleaning Width: - Main brushes: ~1020 mm (40 inches) - With side brushes: up to 1400 mm (55 inches) Solution Tank Capacity: 303 liters Recovery Tank Capacity: 360 liters Working Speed: ~8 km/h Approximate Weight (unloaded): ~2,177 kg Approximate Dimensions: - Length: ~2460 mm - Width: ~1220 mm - Height: ~1430 mm

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Pgjdpfoy Au I Usx Abyjl Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: new, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, front goose neck height approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underride protection: * Bolted design, according to EC Pgsdpoy Tgdiofx Abyol Side underride protection: * According to EC, made of aluminum profiles, anodized Fifth wheel supports: * 2 x 12 t fifth wheel supports with leveling foot and single-side operation on the right side Axles: * 3 x 9 t air suspension axle assembly, disc brakes 22.5", total travel approx. 180 mm, lifting and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlock-protected coupling heads firmly mounted on the front crossmember, without connecting line to the tractor unit Tires: * 6, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, drill holes approximately every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Inside lined with approx. 9 mm screen-printed board (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles Lighting system: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. LED lane keeping lights * 1x15- and 2x7-pole connectors on the front crossmember Equipment: * 2 wheel chocks with holder * Warning signs ECE 70 * Holder for rotating beacon, incl. rotating beacon * Extendable ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: DB 7350 novagrau * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + DB 7350 novagrau * Crossbars: DB 7350 novagrau * SSV: Aluminum anodized * Underride protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver * Contour marking: complete yellow Incl. special accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of pocket holes in the outer frame, evenly distributed * 4 rows of pocket holes transverse to the loading area * 20 pieces of stakes made of galvanized pipe 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in stakes * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes * Side board and stake magazine: sliding rails for side boards and stakes under the chassis on the left and ri

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ Pgsdpfx Aozac Hlobyol * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Psdpfxoy Ui Nqe Abyegl Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: like new (used), Year of construction: 2024, clamping force: 2,700 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Pgodpfxsy U Hu Rj Abyel Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: like new (used), Year of construction: 2024, clamping force: 24,000 kN, ENGEL DUO 23060/2400 TECH Manufacturer: ENGEL Pgedpfxjy U Hpho Abyol Clamping Force: 2,400 t (24,000 kN) CLAMPING UNIT Clamping force: 24,000 kN Opening stroke: 3,200 mm Max. daylight: 4,000 mm Min. mould height: 800 mm Max. mould height: 2,000 mm Tie bar spacing (H × V): 2,020 × 1,620 mm Platen dimensions (H × V): 2,700 × 2,430 mm Opening force: 614 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.4 s INJECTION UNIT Screw diameter: 150 mm L/D ratio: 25:1 Screw stroke: 680 mm Shot volume: 12,020 cm³ Theoretical shot weight PS: approx. 10.9 kg Injection rate: 2,121 cm³/s Injection pressure (regenerative): 1,601 bar Maximum injection pressure: 1,900 bar Screw speed: 90 rpm Maximum screw speed: 115 rpm Screw torque: 18,600 Nm Reduced torque at max. speed: 14,550 Nm Plasticizing rate (3-zone screw): 235 g/s Plasticizing rate (barrier screw): 322 g/s NOZZLE Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 10 Installed heating power: 97.4 kW DRIVE UNIT Installed motor power: 265 kW Hydraulic oil tank capacity: 1,600 l COOLING REQUIREMENTS Cooling capacity: 45.2 kW Water consumption (32°C inlet): 6.6 m³/h Cores: 3+3 Heating zones: 160 Cascades: 56

Condition: excellent (used), Year of construction: 2010, operating hours: 20,656 h, functionality: fully functional, machine/vehicle number: 174620, clamping force: 260 kN, The machine comes from toolmaking and was only used for sampling. This is why it has low operating hours and is in very good condition. Please check the documents; the order confirmation is included there. Podpfx Aexfgfzobyjgl

Condition: good (used), Year of construction: 2007, Clamping force: 1000 t Screw diameter: 105 mm Distance between tie bars V: 1150 mm Distance between tie bars H: 1400 mm Shot volume: 4160 cm3 Type: Horizontal Pgjdpfx Abey Ukfmeyol Drive: Hydraulic KUKA ROBOT 6 axes

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Screw diameter: 55 mm / 35 mm Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Shot volume: 295 cm3 Pgsdpfxjy Ufd Rs Abyjl Type: Multicomponent Drive: Hydraulic \+ robot Wittmann \+ rotary table

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: Pjdpfx Abowm Iz Noyogl • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: good (used), Year of construction: 2019, operating hours: 7,650 h, load capacity: 2,000 kg, lifting height: 4,649 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H20D-02/600 triplex 465 Freelift / Sideshift / Fork positioner 2019 VW Diesel 7,650 hours Video can be sent via WhatsApp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a changing inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices on an AS-IS basis without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Pgodpey Rqflefx Abyjl

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces Pgsdpjy Tuhisfx Abyel - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Side tables Pgsdjy Tu Tlopfx Abyel Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: used, Year of construction: 2007, Extendable superstructure: Yes Please contact Theo Lelie for more information ES-GE 6.SOU-4H-1N 6 axle semi / stepframe lowloader 12-2007 Airsuspension Last 4 axles Hydraulic steert Extra remote steering (by wire) First 2 Axle’s are lift axles Its own 24V electro-hydraulic powerpack Loadingfloorlenght 11.000 mm + 6.000 mm extendible Width 2.550 mm + side extensions till 3.250 mm Weights in kg 6 x 10.000 kg axle load Podpfxjyrtm He Abyogl 25.000 kg fifth wheel load 84.000 kg total weight Ca 17.080 kg own weight Ca 67.920 kg loading capacity ABS

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 Pgsdpfsy Tqh Eex Abyol ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 Pedey Tpihjpfx Abysgl ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: used, axle configuration: > 3 axles, first registration: 04/2007, total length: 13,400 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 9,800 mm, color: white, Year of construction: 2007, Equipment: ABS, Saf axle. 2 x trailing steering axles. Extendable. Lifting roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration: Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 2: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 3: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 4: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Pjdpfxoy N Aw Re Abyjgl Weights: Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight (GVW): 47,600 kg Identification: Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Russian spoken. We do our best to provide correct information, but no rights can be derived from the information provided.