Used Eray/Rinco Auto Lid Utm10.B for sale (44,730)

Condition: used, Grinding wheel dimensions (OD x ID x width): Ø406 x Ø229 x 254 mm Min./max. diameter to be ground: 125 mm Grinding wheel width: 254 mm Max. plunge grinding length: 254 mm Regulating wheel dimensions (OD x ID x width): Ø280 x Ø165 x 254 mm Grinding wheel motor power: 30 HP Total power: 34 HP Approx. weight: 5,500 kg Dimensions: 2,600 mm length x 1,200 mm width x 1,200 mm height Hjdpfx Aoydy Emehzjnp

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor Hodpfx Aexab R Uohzsnp - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. Hjdpfeibichox Ahzjnp - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: used, Grinding wheel dimensions (OD x ID x width): Ø508 x Ø304.8 x 305 mm Min./max. diameter to grind: 150 mm Grinding wheel width: 305 mm Maximum plunge grinding length: 305 mm Regulating wheel dimensions (OD x ID x width): Ø330 x Ø203 x 305 mm Regulating wheel motor power: 4 kW Hnjdpfx Ahoydz S Uezjp Grinding wheel head motor power: 37 kW Total power: 45 kW Length: 3,500 mm Width: 2,500 mm Height: 1,100 mm Weight: 6,500 kg

Condition: reconditioned (used), Year of construction: 2025, Grinding wheel dimensions (OD x ID x width): Ø508 x Ø304.8 x 305 mm Min/max diameter to be ground: 150 mm Hnodpfx Aow R Rq Hjhzop Grinding wheel width: 305 mm Maximum plunge grinding length: 305 mm Regulating wheel dimensions (OD x ID x width): Ø330 x Ø203 x 305 mm Regulating wheel motor power: 4 kW Grinding wheel spindle motor power: 37 kW Hydraulic motor power: 2.2 kW Total power: 45 kW Length: 3,500 mm Width: 2,500 mm Height: 1,100 mm Weight: 6,500 kg

Condition: good (used), Grinding wheel dimensions (OD x ID x width): Ø406 x Ø229 x 254 mm Min./max. diameter to be ground: 125 mm Grinding wheel width: 254 mm Max. plunge grinding length: 254 mm Regulating wheel dimensions (OD x ID x width): Ø280 x Ø165 x 254 mm Grinding wheel motor power: 30 HP Total power: 34 HP Hsdpfxew R Rrqj Ahzsnp Approx. weight: 5,500 kg Dimensions: 2,600 mm length x 1,200 mm width x 1,200 mm height

Condition: new, cutting diameter 305 mm Hnjdpfxou Dbvto Ahzjp saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: - Material is always clamped at right angles Hjdpfxjx Sr Drs Ahzjnp Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: used, Year of construction: 2023, functionality: fully functional, total height: 1,800 mm, input voltage: 400 V, total width: 2,830 mm, total length: 2,300 mm, overall weight: 2,500 kg, working width: 1,950 mm, operating pressure: 6 bar, Equipment: documentation/manual, Kolbus Autobox BX200 with Magazine Feeder Hsdpfx Ahsyaa Rnezonp Boxmaker for producing customized folding cartons Magazine feeder for automatic sheet infeed Fully automatic setup via touchscreen Processes corrugated board up to a maximum of 10 mm Slotting knife width: 7 mm Remote service enabled DEMO machine – LIKE NEW!

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP CNC total power requirement 2.6 / 3.5 kW weight of the machine ca. 605 kg range L-W-H 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds Hnsdpjxaa Uxjfx Ahzjp - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision Hsdpfx Asxaa Hnehzenp - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA Hodpfx Ahexabacezsnp be executed.

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Hnjdpetqtw Uefx Ahzjp

Year of construction: 2019, condition: ready for operation (used), A fully automatic rubberized 90° fitted sheet production line (fitted sheet) Automatex Canada is available. Orientation: W/L and L/L, material feed: unwinder, sewing heads: 4, sewing head distribution left/right: 2/2, end product: fitted sheet corners/box formation, corner angle: 90°. Including tension control, edge and web guiding, longitudinal hemming station with elastic band insertion, length measurement, cross cutting and conveying units. Documentation available. An on-site inspection is possible. Hnjdpfx Aeyhqcqjhzjp

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS Hedoua Dqijpfx Ahzonp - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Hnsdpfsxf Urpox Ahzop Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. Hjdpfoxw Rdljx Ahzonp 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Hnsdsu Ailgepfx Ahzep Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz Hnsdpfx Ahexrgvmjzop - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: Zeroclamp Zerobot 100P automation system, commissioned in 2015. (Perfectly suited for a Haas UMC 750, but also compatible with other machine types.) This automation system allows for either vice handling or raw part handling. Offers completely flexible configuration options. Large workpiece storage for many raw parts (fully customizable). Compact footprint. Features: * Various mounting plates for raw part handling * Raw part gripper Hedpfeyk D Dyjx Ahzenp * Second rack for increased part capacity * and much more This solution enables both raw part and clamping device handling. There are numerous possible applications, and we are happy to provide advice.

Year of construction: 2020, condition: used, Model: SBE1000 Max. load: 500 kg Lifting height: 10 m Hodpfxexdw Tmo Ahzonp Working height: 12 m Weight: approx. 1360 kg Platform surface: 2100 x 1230 mm Depth: 2250 mm Width: 1350 mm Height: 1530 mm Motor power: 2,200 W Thanks to the maximum lifting height of 10,000 mm, repair and maintenance work can be carried out at a working height of up to 12,000 mm. The forklift attachment facilitates transport of the platform. The powerful 220 V / 2,200 W electric motor allows the platform to be raised to its maximum height. The work platform is simply connected to a standard 230 V socket via an extension cable. Operation is performed from the ground.

Condition: new, Year of construction: 2025, Our priority is buyer satisfaction. Sheet metal bending machines from PROD-MASZ are designed according to individual customer requirements. Thanks to many years of experience in the industry, we can effectively implement the expectations of the roofers, to whom we primarily address our offer. Semi-automatic folding bench ZGH-2140 / 3.0mm -ᐳ semi-automatic bending angle, is set on the encoder and potentiometer -ᐳ The machine works like a semi-automatic machine. After bending, the cheek returns to the starting position and the pressure cheek returns to the set height. It is set to 10 mm. -ᐳ This machine is suitable for series production the maximum working length: 2140 mm Bending power: 3.0 mm (steel) Bending beam thickness: 30 mm Bending angle: max. 140 degrees Upper cheek opening: 80-95 mm Weight: approx. 1300 kg Power: 3 KW- 400 volts CE marking with a control panel Warranty: 12 months Hjdpocxu Tzofx Ahzonp Delivery date: up to 3 weeks from the order date -ᐳ Adjustable support bars with scale optionally plus 1250 euros We are looking forward to your contact!

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: Hnjdsw Hrrrepfx Ahzop From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: used, Manufacturer: KASTO Model: SSB 260 VA Max. cutting size: 260 x 260 mm / Diameter: 260 mm Hnsdjxcnppspfx Ahzep Weight: 1915 kg

Condition: new, functionality: fully functional, empty load weight: 11,500 kg, tire size: 295 60 R 22,5, Year of construction: 2026, operation weight: 80,000 kg, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, HEAVY-DUTY LOWBED TRAİLER Lider Trailer for Heavy-Duty Trailers High-Quality and Durability Manufacturing EU Standards. Double Line Brake Systems. One-year warranty for manufacturing defects 2026 Production Customer Requested Colour. Hnedpfx Aherdfabozjp