Used Ess Inert Gas Welding Machine 310 A for sale (113,191)

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min Pgsdpfx Aju Nv Eaobyjl weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: used, Technical details: Pgjdpfx Aou Nwxbjbyel current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! i.D. *

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, resistance welding machines, roll seam welding machines ELREX Type 3x ET70.0.G Mfg. No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with a water-cooled rectifier block Performance data: Total power at 50% duty cycle 210 kVA (total power from 3 transformers) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 20.1 kA (total power from 3 transformers) Primary connection 380 volts, 50 Hz (three phases) Consisting of three transformers - data for a single transformer: Power at 50% duty cycle 70 kVA (power per transformer) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 6.7 kA (per transformer) Primary connection 380 volts, 50 Hz (two phases) Cooling water requirement per transformer 4 liters/min. Insulation class F - Water-cooled transformer - A water-cooled rectifier block is located on the secondary side. Podpfx Aedzp Txjbyjgl - Connection of the DC power output via contact surfaces 50x50mm with M20x1.5mm thread - Temperature monitor on each rectifier element and on each transformer coil - Connection cable 7-core, cross-section 50 mm², length approx. 6 m Overall dimensions WxHxD 700 x 710 x 440 mm Total weight 480 kg in good condition

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 345 mm, total width: 219 mm, total length: 568 mm, input voltage: 400 V, ground cable length: 1,000 mm, overall weight: 23 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 12 kVA, open-circuit voltage: 50 V, welding current at 60% duty cycle: 220 A, welding current at 100% duty cycle: 180 A, space requirement height: 500 mm, space requirement width: 400 mm, space requirement length: 700 mm, input current: 16 A, continuous power (apparent): 8 kVA, Manufacturer Miller Model STi 270 Main Category Welding Equipment Machine Name / Vehicle Type Industrial Welding Machine Condition Used Functionality Fully Functional Inspection Under Power Yes Description Miller STi 270 industrial welding machine for sale. The unit is fully functional and suitable for professional welding applications. Supports both MMA and TIG welding processes. Compact and durable construction designed for workshop and industrial use. Technical Specifications Input Power 400 V, 16 A, 3-phase, 50/60 Hz MMA Adjustment Range 5–270 A, 20–30.8 V TIG Adjustment Range 5–270 A, 10–20.8 V Duty Cycle at 40% 270 A Duty Cycle at 100% 180 A Open Circuit Voltage 50 VDC (12 VDC)* Welding Processes MMA, TIG Dimensions (H x W x D) 345 × 219 × 568 mm Weight 23.2 kg Features VDR Lift-Arc Pgsdey Uxwqjpfx Abyel Hot-Start Arc-Force

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA Pgsdsy Ty Dcspfx Abysl voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner Pgedpfxox E Rd De Abyjl After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature Psdpfx Aboxrb Tgjyegl - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Pgjdpfxjy Snycj Abyel

Year of construction: 2003, operating hours: 200 h, condition: ready for operation (used), Equipment: 4 in one shovel, Bluetooth, Capable to welt up to 8mm. Roller table including the deal Pgsdpfx Ajy Tia Hsbyel Feel free to offer. Machine will be dismantled after 6th of June 2026

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Pgodpfjrz Tupox Abyjl Motor power 2 kW Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition

Condition: used, 1 pipe welding machine with rotary table/indexing head SDT-0.5, capable of welding pipes with a diameter of up to 100mm and a length of 1000mm, custom-built, mobile Color: as shown in the pictures, according to the images and on-site inspection Podjy Thlhjpfx Abyogl Dimensions L/W/H: 190x180x80cm Condition: used

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Pjdpoit Rq Hofx Abyogl Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Psdpehpf Iysfx Abyegl Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Pgjdpfxoycv Sas Abysl Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Pgjdew A Af Iepfx Abysl Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Psdpfx Abswq Hp Tsyogl Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Pedswq Hqkepfx Abyogl Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – State-of-the-Art Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precision laser welding: the Airtech Handheld Laser Welding System with 3,000 Watt capacity! Ideally suited for demanding sheet metal processing – efficient, safe, and highly versatile. Highlights and Features: - Output power: 3,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ergonomically positioned for comfortable operation - Robust housing and intelligent internal structure for maximum service life - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, safety mechanism against incorrect operation - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components meeting European standards Your Advantages: Pgjdpfx Asy R I Tgobysl - Safe operation thanks to comprehensive safety mechanisms and alarm systems - Flexible applications, including automatic wire feeding and robot integration - Low operating costs and easy maintenance thanks to well-designed technology and durable components

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pgedpfx Asy Rqh Tjbyel Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Pgodoy Stahepfx Abysl Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Podpfx Abjyl Sy Eeyjgl

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: MB 0484 / 2014, type of input current: three-phase, continuous power (apparent): 10 kVA, type of cooling: air, total width: 1,119 mm, total length: 2,595 mm, total height: 2,510 mm, overall weight: 1,700 kg, For sale is a capacitor discharge welding system (CD welding system) from the brand GLAMATRONIC, model GKS-S4/12-Q, manufactured in 2015. The system is in good condition and is suitable for industrial welding applications with high process reliability and precise energy output. The system has been regularly maintained and is immediately ready for operation. The control cabinets are equipped with additional air cooling. Technical data: Make / Type: GKS-S4/12-Q Year of manufacture: 06/2015 Rated voltage: 3 x 400 V AC / 50 Hz Pgsdpfsy Rmk Dex Abyjl Control voltages: 230 V AC / 24 V DC Rated power: 10 kVA Welding energy: 4 kJ Welding force: 12 kN Max. supply line fuse: 32 A Frame weight: approx. 1,700 kg Control cabinet weight: approx. 1,000 kg

Condition: used, Year of construction: 2016, functionality: fully functional, The MAJA SAH 170L ice machine is an essential piece of equipment for food industry professionals looking to produce flake ice efficiently. Thanks to its robust design and optimized output, it guarantees continuous ice production, ensuring product freshness throughout the process. In fact, this machine can produce up to 170 kg of ice in 24 hours, making it ideal for high-demand environments. What's more, the MAJA SAH 170L is equipped with a wheeled storage bin, making it easy to transport and store ice. In addition, the polyurethane foam insulation system keeps the ice at an optimum temperature, while preventing excessive melting. What's more, maintenance is simplified thanks to easy-to-clean surfaces and convenient draining via an outlet tap. With its reliable performance and functional design, this machine is an asset for companies looking to improve their ice management. In short, the MAJA SAH 170L ice machine combines efficiency, mobility and ease of maintenance, offering a complete solution for ice production needs. Psdpfeu Iu Svox Abysgl Technical specifications: Manufacturer : MAJA-Maschinenfabrik Type: SAH 170 L Year of construction: 2016 Refrigerant: R 404 A. Refrigerant charge : 1.0 Kg. Power required : 0.99 kW. Amperage: 6.73 A. Voltage : 1 Ac / 230 V / 50 Hz / PE Ice production (approx.) : 170 kg / 24 h (7 kg / 1 h). GWP : 3922 CO2e : 3922 t Width: 705 mm Depth: 700 mm Height : 1380 mm Silo content: 50 Kg. Capacities given with R404A fluid, for water inlet temperature +16°C, ambient temperature +20°C. With heat exchanger for optimized efficiency. The wheeled storage bin makes ice handling a breeze: - For transporting and storing approx. 50 kg of MAJA flake ice. - Sturdy polypropylene inner and outer surfaces. - Optimum insulation with polyurethane foam. - Easy-to-clean surfaces. - Double bottom to separate ice from melt water. - Easy emptying via drain tap at bottom. - Mobile thanks to stainless steel supports on castors with brakes.

Condition: used, Double-sided planer Feed rate 110 m/min Maximum planing width 310 mm Electrical power 95.75 kW Bottom cutterhead: 37 kW Top cutterhead: 45 kW Pjdpfx Aoy Ry Ddjbyogl Feed motor: 13 kW Adjustable fence for the bottom and top cutterheads

Condition: used, functionality: unexamined, Double-sided planer Feed rate: 80 m/min Maximum planing width: 310 mm Lower shaft: 22 kW Upper shaft: 30 kW Feed drive: 7.7 kW Jointing device: bottom and top Psdpfxjy Ryx Ue Abyjgl Year: 1990