Used Filutiv Gmbh Topaz Mini 3 for sale (101,806)

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 5083, travel distance X-axis: 440 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 210 mm, For sale: B3000 Dosing Machine in very good overall condition Due to the closure of our site, we are selling our B3000 dosing system, which is only two years old. The machine has had minimal use and currently has an accounting residual value of CHF 120,000. Additionally, a credit note worth €9,000 for spare parts procurement for this machine from BDtronic will also be included in the sale. The machine will remain set up until January 2026 and can be inspected in Mendrisio. Please note that it is currently out of service and will require a complete maintenance check before being recommissioned. Therefore, a live demonstration in operation is not possible at this time. Technical specifications: - Sequential dosing of three different resins or foams - Delivery rate: 1–4 g/s Materials processed: Hnsdpfexzpdxox Agyok - Elantas Elan-tron PU 505 HR/PH3 - Elantas Elan-tron PU 505 LR/PH3 - Elantas Micares X1080 R14/P 978 Further technical details and dimensions can be found in the attached PDF documentation. Inspection available by appointment. Dismantling and transport to be organized by the buyer. Dismantling can be supported by BDtronic, which has estimated 3 days work at €2,770 per day.

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: Hjdpfx Agevuw R Reyjnk - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: LAS 23 mit integrierter Absaugung, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional 30 W) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V Hnjdpfevyc Rmox Agyok - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - fiber optic cable approx. 2,50 m - Extraction optional

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile Hjdpfx Ageqfcvieyonk - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Hnsdpfx Asi Huzxsgyek Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: new, first registration: 07/2025, loading space length: 6,000 mm, loading space width: 2,200 mm, color: orange, Year of construction: 2026, operation weight: 30,000 kg, TPW 30 AL - PA with all-wheel steering and oscillating axles Dimensions Length: 6000 mm Width: 2200 mm Tyres: Bands 425x305, 2x150 twin wheels, 8-fold wheel mounting Drawbar with 40 mm towing eye and height adjustment with fall protection Hodpfx Agshbq Izoyjnk Transport floor: 40 mm Douglas fir wood Coating: RAL 2000 Stop blocks per longitudinal side: 4 pcs, see load securing

Condition: new, empty load weight: 3,400 kg, maximum load weight: 30,000 kg, overall weight: 33,400 kg, loading space length: 6,000 mm, loading space width: 2,200 mm, tire size: 559x300, Year of construction: 2026, TPW 30 VL - LK Turntable steering front axle Trailing rear axle (rigid) Length: 6000 mm Width: 2200 mm Towing drawbar with drop safety and height adjustment Wheels: 559x300 solid rubber tyres with steel rims 5 stop blocks per longitudinal side for load securing Hnsdpfxehbmu Ie Agyek Paint finish: RAL 2000 blue Transport floor: 40 mm recessed, bolted wooden platform #Heavy-duty transport #In-plant transport systems #Heavy-duty trailers 6–100 tons #Heavy-duty trailers from 3 to 100 tons #Heavy-duty transport platform wagons #Platform heavy-duty trailers #All-wheel steering #Transport carts

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: Hsdpfx Ajyizxrsgyjnk The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1989, condition: ready for operation (used), Polymer storage tank Article no.: RE-HU-2019-0602-B38-e Product: Used polymer storage tank container Material: GF - UP / Leguval W 17 (glass fiber reinforced polyester resin with top layer) Manufacturer: Theodor Vanck GmbH Dimensions: diameter 2.40 x height 2.80m Volume: 12 m3 Hnedpfsd Hgc Ujx Agyek Year of construction: 1989 Fabr. No .: 55163

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters Hodpfx Agsvppw Soyenk EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system Currently 6 identical machines available External dimensions: Height 4889 mm Width 2785 mm Depth 2810 mm Total machine load capacity up to 2 x 15,000 kg 63 beams with center bar for up to 400 kg load each In the clear usable dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the service opening 875 mm above the top floor, then 875 mm high Motor ratings Vertical drive 6 kW / 400 volts Horizontal drive 0.55 kW / 400 volts Color: gray/blue Surface cleaned, signs of wear possible Hneded Sphiopfx Agysk Subject to change Errors and technical changes or deviations in details in photos, delivery, and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled Hnsdpfx Ajyiz Dzegysk - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: - Windows 11 - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE compliant · Made in Germany

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Dryer: Manufacturer: Ryser GmbH Switzerland Type: BAFAG ATU 35 Power: 3 kW Year of manufacture: 2015 Material conveying device: Manufacturer: Labotek Type: PGT 4-I/MV/MR/P1 Hnedpfx Aju Rcz Dsgyek Model: 101501 Year of manufacture: 2016 Power: 0.4 kW

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, volume flow: 3,000 m³/h, total width: 2,200 mm, total length: 10,600 mm, total height: 2,350 mm, Biofilter System for Odor Reduction – bioteg MCBF 3000 QSW For sale is a bioteg MCBF 3000 QSW biofilter system designed for exhaust air purification and odor reduction, suitable for an airflow rate of up to 3,000 m³/h. The system was decommissioned due to regulatory requirements, is technically complete, and was engineered for fully automatic, continuous outdoor operation. The installation comprises a double-walled biofilter container (outer shell made of steel, inner lining PE-HD), a pre-connected air humidifier (cross-flow scrubber), a radial fan with frequency converter, as well as a separate technical compartment with control cabinet. The filter bed is filled with approximately 30 m³ of durable, longitudinally-shredded root wood, offering high shape stability and low compaction. Hnodpfxeyhwaco Agyjk The biofilter system complies with VDI guideline 3477 and ATV leaflet 204 and achieves high purification performance (including up to 97% odor reduction, 98% H₂S, and 97% NH₃ at design conditions). Maintenance requirements are low (regular visual inspections, annual servicing). Typical areas of application: Waste treatment facilities, composting plants, wastewater treatment plants, industrial exhaust air purification, municipal waste management operations. Further technical documentation, dimensions, performance data, and viewings available on request.

Year of construction: 1983, condition: ready for operation (used), Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available. Hnjdpfxsriwfis Agyjk

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Hnodpfxjrc Hiis Agyjk

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l Hedpfx Agsv Tk Exoyenk

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light Hnsdpeh I Nqwjfx Agyok - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Hsdpfxou Thh Es Agysnk Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2011, condition: like new (used), functionality: fully functional, machine/vehicle number: 11-02/2011, We are offering this as-new GEBER Industrieofenbau GmbH KO/e/u/-3000 chamber circulation oven, year of manufacture 2011. Manufacturer: Geber Industrieofenbau GmbH Model: KO/e/u/-3000 Serial number: 11-02 Year of manufacture: 2011 Rated voltage: 230/400 V Rated current: 125 A Rated heating capacity: 45 kW Heating medium: Electric energy Current type / Frequency: 3-phase / 50/60 Hz Rated temperature: 300 °C Wiring diagram number: 2011 0054 Internal dimensions (WxDxH): 1300x1300x1800 mm Hedoyg Nxbspfx Agyonk Net weight: 2,000 kg Trolley included (see pictures) Documentation, CE declaration supplied We are happy to arrange installation and commissioning through the manufacturer upon request. Viewing by appointment possible. If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. Hsdpfex Sq I Njx Agysnk The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total height: 1,240 mm, !Exhibition return cabinet! WKS003 Tool cabinet set for bending with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm Two-colour powder-coated (Trumpf) Housing: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 kg net (475 kg gross) Hodsuucmgjpfx Agyjnk Pre-assembled as a set for approx. 33 running metres of press brake tools. Max payload 900 Kg for each drawer

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total length: 1,300 mm, total width: 1,040 mm, total height: 1,240 mm, overall weight: 475 kg, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing: black-grey structure (RAL 7021) Pull-outs : black-grey structure (RAL 7021) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg Hsdpfxjur N Ryo Agysnk As a set approx. 33 running meters of press brake tools completely assembled. Available in various sizes and with many accessories!

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis Hsdpfxetrf Smj Agyonk - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm Hodoiw Eafopfx Agysnk - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003