Used Flowveyor International Ltd Aeromechanical Conveying for sale (21,546)

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 Gjdpfxsk Aa Uko Afuokc RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm Gkjdjk Aa Unepfx Afusc height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 Gksdpfx Afjk Aba Teuec The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Gksdok Abcgopfx Afuec Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Gksdpjk Abfbjfx Afuec For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Features: * Used roller conveyor from the manufacturer Overbeck * Very stable design * Incl. 6 SEW motors/drive units * Condition: fully functional, with signs of wear * Ideal for fast material transport * Professionally disassembled and packaged * System consists of 26.3 meters * Optional: side guide System consists of 10 segments: 1 x 3.3 meters 3 x 3 meters 1 x 2.9 meters 1 x 2.6 meters 1 x 2.5 meters 3 x 2 meters * Price per meter Technical data: Dimensions of the roller conveyor Powered roller conveyor, approx. 26.3 meters Overall width approx.: 510 mm Conveyor width: 440 mm Axle spacing: approx. 100 mm (adjustable) Drive type: flat belt / pocket belt Material: steel, galvanized Profile height: 140 mm Color: Blue Gkedpfx Aogm T A Tofuec Roller conveyor The roller conveyor is ideally suited for the picking zone to integrate machines or workstations and optimize the internal flow of operations. During transport, the roller conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the collection or delivery point, and also serves as a connecting section before or between production and processing machines. In addition, it enables efficient parts transport within the company and warehouse and is used for conveying large quantities of materials over long distances. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in various industries, such as logistics, the pharmaceutical industry, the skilled trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 500 kg, temperature: 250 °C, heating capacity: 105 kW (142.76 HP), air demand: 7,000 m³/h, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, Equipment: lighting, Compact powder coating system (complete system) – booth, curing oven, conveying system & Gema technology Complete system for manual powder coating of parts up to 3,000 mm in length and 500 kg payload per carrier. First-class brand-name components (Gema, Siemens, Schneider Electric, Donaldson, Riello), including installation, commissioning and operator training. Gsdpfx Afezu Imreuskc Overview & Concept For sale is a brand-new, manual powder coating complete system for workpieces up to 3.0 m in length. The system combines an efficient extraction coating booth, a powerful gas curing oven, and a flexible rail conveying system including steel structure (individual design/planning of a powder coating system possible upon request!). 1. Powder coating booth (double-sided manual coating) - External dimensions (L x W x H): 3,400 x 1,100 x 2,150 [mm] - Workpiece opening dimensions: 500 x 1,600 [mm] - Extraction & filter: 2x radial fans at 4,500 m³/h (ATEX version, 3 kW each); 2 filter units with a total of 6 antistatic Teflon filters (Donaldson, 325 x 660 [mm]) - Cleaning: Automatic/manual compressed air pulse cleaning (6 valves) - Safety/equipment: ATEX-compliant internal lighting, sound insulation in the fan area, control via Siemens/Schneider wall control cabinet Electrostatic powder coating technology (Gema) (other manufacturers can also be supplied upon request) - 2x hand guns: Gema OptiSelect Pro with PowerBoost® technology, ATEX-certified - 2x control units: Gema OptiStar 4.0 CG20 with DVC and PCC precision current control, 250 memory programs, app connectivity - 2x injectors: Gema OptiFlow IG07 with quick-release & non-stick cartridge Convection curing oven (chamber oven with double door) - Internal dimensions (L x W x H): 3,500 x 2,000 x 2,300 [mm] - Max. temperature / operating temperature: up to 250°C / 180 - 200°C - Heating: Indirect thermo block with Riello/Ecoflam burner (approx. 105 kW (90,000 kcal/h)) - Fuel: Natural gas or liquefied gas (LPG) (other energy supply e.g. electricity possible upon request) - Recirculation: 2 x 3,500 m³/h recirculation fans (plus automatic fan exhaust fan) - Insulation: 150mm rock wool insulation Manual conveying system including steel structure Load capacity: Max. 500 kg per carrier Equipment: 5 oven rails, 15 carriers (3m each), 3 transverse transfer trolleys Running trolleys: Equipped with high-temperature resistant bearings Scope of supply & services / Commercial points Included in the price: - Booth with extraction & filter unit - 2x Gema powder coating units - Curing oven including thermo block & burner - Conveying system including steel structure & trolleys - Installation, commissioning & operator training on site

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Gsdsffv Tpopfx Afuskc Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm 5. Dryer 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: good (used), Year of construction: 2006, Features: * Used telescopic belt conveyor * Condition: fully functional with signs of use * Ideal for rapid material transport * Professionally disassembled and packaged * Color: Blue Technical Data: Manufacturer: Budde Type: TGF 02 with hydraulic height adjustment Condition: Good (used) Color: Blue Year of manufacture: 2006 Overall length (retracted): 5,000 mm Overall length (extended): 11,500 mm Overall width: 1,240 mm incl. control cabinet Overall width: 990 mm Belt width: 600 mm Belt type: Smooth Telescopic belt conveyor The telescopic belt conveyor is ideal for linking machines or workstations in the picking area and optimizing internal processes. During transport, the telescopic belt conveyor can convey sensitive and variously sized containers, boxes, or other packaging and article units to the loading or unloading point, and also serves as a connecting section before or between production and processing machines. In addition, it enables efficient parts transport within the plant and warehouse and is used to convey significant quantities of material over long distances. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Gsdpfx Afod Tihrsuekc Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking shelves or containers.

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Gedpjy D Adtsfx Afuokc Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Gksdszhnlzspfx Afujc Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, warranty duration: 12 months, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, year of last overhaul: 2026, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: Gjdpjyyl Aqjfx Afuekc • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off right hand units, Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organized by appointment 💰 Price: £20,500 Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries All Test certs attached from Ishida for X Ray and radiation safe levels Viewings Welcome for full demonstration

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked Gkedow Rn Euopfx Afuec 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, Refurbished at Industrial Microwave Services Ltd to comply with UK Safety Standards. • Manufacturer/Brand: Tianjin Leici Electronic Technology Co., Ltd. (A prominent Chinese specialized manufacturer of industrial microwave drying systems and component integration). • Core Subsystem Model: MG1000 (Specifically utilizing the MG1000 Microwave Inverter Power Supply units coupled with dedicated industrial air-cooled magnetrons which have been upgraded). • Equipment Classification: 18kW Industrial Tumbling Cage Microwave Drying/Sterilization Oven. The 18kW total operating rating is achieved structurally by stacking 18 modular 1kW MG1000 power-and-magnetron sets together inside the machine grid. Machine External Dimensions: 1550mm Wide - 1178mm Depth - 1800mm High Internal Cavity Depth: 900 mm Door Width: 680mm Gksdpsyv H T Aefx Afusc 6 x Internal S/S trays - 805mm long - 295mm Wide - 9mm Depth 18Kw at 100amps 3 phase + neutral needed Weight approx. 500kg. Refurb Notes 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. 5. Improve the Magnetron launch inputs to the cavity. 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, Five Star Refrigeration water-cooled chillers with six cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Gkodpfxszz Rfqo Afuec Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers Six towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Godpfxoz Apkue Afujkc Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Spindle nose – table: 120–730 mm Table size: 1,250 × 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW (40 %) Rapid traverse rate X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Godpfx Asz Im Tnjfujkc Tool diameter with free magazine slot: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control system: Heidenhain 530 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air: 3/8″, 6–8 bar Power supply: 400 V / 75 A / 35 kVA Coolant tank: 250 l Guideways X/Y/Z: 45/45/45 mm Machine weight: 7,500 kg Internal cooling (IKZ): 22 bar Program runtime: 12,214 h Spindle hours: 14,123 h Machine operating hours: 39,242 h Control system operating hours: 34,987 h EQUIPMENT Chip conveyor Electronic handwheel Internal cooling (IKZ) 22 bar Oil-cooled spindle Linear guideways X/Y/Z Machine bed made of cast iron Note: Machine is sold without tools and vise.

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Gkedpfx Afez I Tt Iouec Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: used, functionality: limited functionality, Year of construction: 2018, operating hours: 16,914 h, load capacity: 4,000 kg, lifting height: 4,040 mm, fuel type: gas, mast type: duplex, construction height: 2,855 mm, empty load weight: 6,300 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,040 mm Load capacity: 4,000 kg Load center: 450 mm Fork width: 150 mm Fork thickness: 50 mm Fork length: 950 mm Fork carriage width: 1,350 mm MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Power: 42 kW Speed class: 15 ISO class: ISO class 3 = 2,500–4,999 kg Godjz Hvmnopfx Afuekc Front tires Tire type: Non-marking Outer diameter: 450 mm Tire width: 200 mm Tire condition: 0–20 % Rear tires Tire type: Non-marking Outer diameter: 680 mm Tire width: 255 mm Tire condition: 0–20 % Battery voltage: 12 V Battery type: Starter Battery year of manufacture: 2018 Unladen weight: 6,300 kg Overall length: 2,190 mm Overall width: 2,050 mm Operating hours: 16,914 h EQUIPMENT 3rd valve Rear work light Front work light Heater Full cab Air conditioning CE certificate Non-marking tires Seat heating 3-wheel design Seat Two-way catalytic converter 55-liter gas tank with indicator Blue Spot Large alternator, 90 A Air-suspended seat Footwell heater Note: The rear wheel motor is leaking.

Condition: used, maximum load weight: 20,040 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2014, next inspection (TÜV): 10/2028, loading space length: 10,420 mm, Year of construction: 2013, Internal vehicle number: G400278 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly through us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Gkodpfjz E T D Isx Afusc

Condition: used, mileage: 141,888 km, power: 294 kW (399.73 HP), first registration: 01/2019, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2028, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, Internal vehicle number: VTC30007 Equipment: [Details of equipment would be listed here] Errors and omissions excepted. We would be happy to accept your used vehicle as a trade-in. Financing is available directly with us. Godpfxjz H Ekvj Afujkc GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 261,013 km, power: 294 kW (399.73 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2028, color: orange, gearing type: mechanical, emission class: euro5, total length: 10,000 mm, total width: 2,500 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G400291 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Leistikow 18/1741//11/13 Year of manufacture: 2013 15,000 liters Piston system Remote control URAKA KD-716-G Year of manufacture: 2013 Gsdpjz I Hmzjfx Afuskc 170 bar 478 operating hours CVS VACUSTAR W 1600 R Year of manufacture: 2013 200 bar 2,083 operating hours Errors and omissions excepted We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm A-axis: 360° × 0.001° A-axis speed: 20 rpm Spindle speed: 0–9,000 rpm Speed control: stepless Tool interface: DIN 69871 SK40 Working feed rate: 5–28,000 mm/min Rapid traverse rate X/Y/Z-axis: 28,000 mm/min Table design: Bridge table with 4 sides Table length: 1,800 mm Table width: 113 mm Table load capacity: approx. 150 kg Magazine design: Chain magazine Magazine capacity: 44 Max. tool diameter: approx. 70 mm Max. tool diameter with free adjacent positions: approx. 200 mm Max. tool length: approx. 240 mm Max. tool weight: 5 kg Max. total weight of tool magazine: approx. 200 kg Tool change time: approx. 8 s MACHINE DETAILS Control system: Siemens Sinumerik 810D Total power consumption: 14 kW Dimensions & Weight Dimensions (L x W): approx. 6,500 x 3,500 mm Machine weight: approx. 9,000 kg Operating hours: 19,357 h EQUIPMENT Second milling spindle Exchangeable milling spindle Coolant system (coolant tank: approx. 480 l) Internal cooling External cooling Clefil RBF-E100 unit (coolant pressure: 20 bar) Clamping system Hydraulic clamping options in the machining area Pneumatic clamping options in the machining area Römheld hydraulic unit (max. hydraulic pressure: 500 bar) Additional equipment Chip conveyor Coolant nozzle in the machining area Gedpjz Izdhsfx Afujkc Enclosed work area enclosure according to UVV Automatic measuring probe RWP20.00 Various SK40 tool interfaces Technical documentation Layout plan

Condition: excellent (used), A well-maintained internal cylindrical grinding machine, manufactured by JUNG, type 221, with a surface grinding attachment. The largest bore that can be ground economically is 150 mm. Grinding length without surface grinding: 250 mm. Grinding length with surface grinding, depending on the chuck length: ≤ 250 mm. Largest swing diameter inside the guard: 350 mm. Height of the spindle center above the table: 245 mm. Workpiece spindle bore: 44 mm. Workpiece spindle hollow taper: metric 50. Gedpfoy Svz Uex Afuekc Workpiece spindle speeds: 58 - 85 - 120 - 170 - 246 - 348 rpm. Table speed in rapid traverse (infinitely adjustable): 10 m/min. Table speed during grinding (infinitely adjustable): 0 - 8 m/min. Power requirement: 11 kW. Power requirement for the machine with surface grinding attachment: 12.5 kW. Net weight: approx. 3500 kg.

Condition: good (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 7428, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Gsdozfwgvjpfx Afujkc For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.