Used Goma C2 for sale (1,757)

Condition: used, functionality: fully functional, Year of construction: 2007, load capacity: 250 kg, Manual Crane to lift goods Good used condition Can install or supply only Godpfxjw Rfuge Alxjit Transport can be arranged or can be collected Located in Lutterworth Leicestershire Video in pictures of it being operated 4 columns track measurements 2 x 6670mm with columns width needed 7680mm track measurements 2 x 7300mm with columns width needed 8300mm

Condition: good (used), End mill, shank cutter, cutter, slot cutter, wood cutter -Two-knife cutter Gsdpfxeb D I Axj Alxoit -Roughing-finishing end mill -4x: Milling cutter Ø 4 x 12 mm -7x: Milling cutter Ø 5 x 12 mm -10x: Milling cutter Ø 6 x 14 mm -1x: Milling cutter Ø 8 x 20 mm -5x: Milling cutter Ø 10 x 20 mm -4x: Milling cutter Ø 11 x 22 mm -3x: Milling cutter Ø 12 x 22 -Hole: Ø 10 mm -Type: M623 -Quantity: 34 pieces -Sale: only complete set -Weight: 3.6 kg

Condition: good (used), Year of construction: 2000, operating hours: 77,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, Type: KM 200-700 C2 (CLEAN ROOM) Year: 2000 Screw ø: 50 mm Operating hours: 77,000 h With accumulator Euromap 12 Godpfxewm Ifnj Alxeit Injection pressure: 1,892 bar Island distance: 560 x 560 mm Molding table size: 915 x 915 mm Min tool: 350 mm Opening path: 700 mm Daylight: 1,050 mm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: Gsdpfsv Stbmsx Alxeit - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Light color neutral white Luminaire luminous flux 4000 lm Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Gedpfxjvbu Awe Alxsit Lamp height: 72 mm Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 15129, total length: 280 mm, total width: 163 mm, total height: 240 mm, input frequency: 50 Hz, input current: 39 A, heating capacity: 10.25 kW (13.94 HP), space requirement length: 300 mm, space requirement width: 290 mm, Equipment: documentation/manual, This DÜRR ECOCLEAN "EcoCBase C2" is available for sale. Godpfexryzvsx Alxjit It is loaded via a small roller conveyor and Schäfer perforated crates. The roller conveyor is included. Over 50 of these crates are also available (at an additional cost). Additionally, there is a Euro pallet with various filters and oils for servicing.

Condition: used, maximum load weight: 13,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 4,950 mm, loading space width: 2,400 mm, loading space height: 900 mm, Equipment: ABS, * Schmitz 2-axle tandem tipper * Type SGF C2 * Three-way tipper * Roll tarp * Schmitz axles Gisdpfx Aoxfffmjlxjt * Air suspension * Disc brakes * EBS * ABS

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Gjdpfx Alowthfuoxsit Minimum mould height: 300 mm Total weight: approx. 6,000 kg

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Godpjxvc Igofx Alxjit

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Godjxuq R Hjpfx Alxsit Operating hours: approx. 63,000 h The machine can be inspected at any time

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in disk drive 2. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Moving platen force: Opening: 105 kN Closing: 95 kN Platen dimensions (h × v): 1060 × 1095 mm Tie bar clearance (h × v): 710 × 710 mm Mold opening stroke: 920 mm Mold height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Standard throughput: 108 g/s Increased throughput: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of barrel heating zones: 7 Gijdpfjx Elukex Alxet Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: AM642682, ALCATEL 2063 C2 2-Stage Rotary Vane Pump Pumping speed: 66 m³/h Ultimate pressure: Without gas ballast < 5 x 10‐3, With gas ballast < 5 x 10‐2, Mains connection / Power consumption: 380V/4A, Godpsxtb Erefx Alxsit Inlet flange: KF40, Condition: good, fully refurbished, Operating fluid: PFPE, 1 year warranty

Condition: excellent (used), Year of construction: 2002, Krauss Maffei Injection Moulding Machine KM 420-2700 C2 Year of manufacture: 2002 Machine Description Giodsxq Akkepfx Alxjt The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise unit with a high clamping force of 4200 kN, designed for processing thermoplastics. Equipped with a reliable hydraulic system and a precision control system, it ensures stable and repeatable operation in demanding production environments. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 4200 Max. mould opening force kN 250 Moving platen travel force – opening kN 124 Moving platen travel force – closing kN 102 Platen dimensions (H × W) mm 1270 × 1200 Tie bar spacing (H × W) mm 800 × 800 Mould opening stroke mm 1020 Minimum mould height mm 380 Maximum daylight mm 1400 Ejector force (forward / backward) kN 95 / 48 Maximum mould weight kg 6700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio - 20 Injection pressure bar 1829 Shot volume cm³ 1097 Shot weight (PS) g 998 Injection speed cm³/s 513 Max. plasticising rate g/s 108 Nozzle contact force kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating power kW 36 Number of heating zones – barrel - 7 Oil tank capacity l 1075 Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 100 mm, injection pressure: 1,742 bar, mold height (min.): 600 mm, opening stroke: 1,150 mm, plate width: 1,440 mm, plate height: 1,490 mm, Injection molding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Slide plate opening force: 169 kN Slide plate clamping force: 144 kN Mounting plate dimensions: 1,490 mm x 1,440 mm Clear width between columns: 1,000 mm x 930 mm Mold opening stroke: 1,150 mm Minimum mold height: 600 mm Injection Unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection throughput: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm Giedpfx Alewp Si Njxjt C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and Hydraulic Equipment Rated power of pump motor: 90 kW Installed heater output: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection Krauss Maffei 24.03. New screw drive (hydraulic) 25.01. New non-return valve 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with color monitor and integrated control panel - Built-in floppy disk drive - Complete plasticizing system for thermoplastics with 100 mm screw diameter, check valve, and open nozzle

Year of construction: 2019, condition: excellent (used), Double-head automatic saw for cutting aluminium and PVC profiles, equipped with electronic control and pneumatic tilting of the heads. Features a virtual tilting axis for the cutting heads. Cutting length: 5000 mm Control: Electronic with automatic feed of the movable head Tilting of heads: pneumatic, with adjustable angles (range 90° to 45°). Manual adjustment of heads: other angles up to 20°30'. Giodpfswwtwqjx Alxet Additional features: Hydropneumatic blade feed, profile clamping.

Condition: good (used), Year of construction: 2006, operating hours: 65,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, Hydraulic core pull 2x Hot Runner 4x Godstqifnopfx Alxeit Air valves

Year of construction: 2012, condition: ready for operation (used), - USED - DOUBLE HEAD CNC DIE SINKING EDM X-AXIS TRAVEL: 3000 total - 2000 single mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 1000 mm RAPID FEEDS X-Y-Z: 2 - 2 - 7,5 m/min MAX ELECTRODE WEIGHT: 200 Kg MAX  PIECE WEIGHT: 20000 Kg TANK SIZE: 4000 x 2000 x 1250 mm TABLE SIZE: 3200 x 1600 mm TOOL MAGAZINE: 13+13 POS WEIGHT: 32550 Kg OVERALL DIMENSIONS: 6640 x 5800 x 4120 mm ACCESSORIES: C-AXIS NOTE: MAX PIECE HEIGHT 1130 mm Giedpfewl R A Hsx Alxst

Condition: used, Wegoma table saw machine offered. Type: TS 250 For more information call us or send an e-mail. Gijdsgmb Agspfx Alxjt

Condition: excellent (used), Catalogue number 7340 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 120mm - exchangeable spindle - spindle locking - height adjustable up/down - original cast iron fence with full adjustment - 4 spindle speeds + right/left rotation - table dimensions: 1030x900mm - motor: 3.8kW - overall dimensions (L/W/H): 1030x1000x1080mm - weight: 614kg ADVANTAGES – manufactured in Poland – very good condition – used milling machine Giedpfx Aloy R A N Njxot Net price: 6,900 PLN Net price: 1,640 EUR depending on the exchange rate of 4.2 EUR (Prices may fluctuate due to exchange rate changes)

Condition: ready for operation (used), Year of construction: 2023, Universal vertical drilling machine. Can be equipped with any drilling head. Fitted with ruler and stops. Operated pneumatically with a lever switch. Gsdpoy Rp T Isfx Alxoit

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic Gisdpfoy Rr Tdsx Alxst - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW Giedpfx Aloy Rrw Nsxet - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: new, Year of construction: 2026, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Gedpfx Alod Dczzexoit Please don't hesitate to contact us.

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width Godpfx Aewkbcbelxeit - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: good (used), - spindle diameter: 25 mm - working spindle height: 100 mm Giedpfx Aloy Ivkuoxot - interchangeable spindle - height adjustable (up/down) - original cast iron fence - table dimensions: 1020x900 mm - motor: 5 kW