Used Griggio Maka Kps 400A for sale (394)

Condition: new, The aggregate is new, complete incl. control, diesel tank, exhaust and batteries. Description Model: NWR440 Ricardo engine newpower generator genset Continuous power : 400 kVA / 320 kW Maximum power : 440kVA / 352kW Engine : Kofo Ricardo WT13B-330DE, 6 cylinders water cooled Connection : circuit breaker Frequency : 50 Hz. Voltage : 400/230 V incl. electronic speed control , AVR, battery charger, galvanized sound insulation, cooling water heater, control unit : Comap AMF8, mains power supply Tsdsnzht Nopfx Antsb Dimensions: 4330x1630x2210 mm Weight: approx. 4030 kg Mains monitoring, mains supply, soundproofed Immediately ready for use. additional cost 400A Automatic changeover switch : € 1400 630A automatic changeover switch : €1650 Shipping: - Worldwide shipping incl. unloading is available for an additional charge. - In order to be able to quote an exact freight price please send us an inquiry with your data and your complete address

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC165 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Description Model: NWC165 Cummins Engine Newpower Generator Continuous power: 120kW / 150 kVA Maximum power: 132kW / 165 kVA Engine : Cummins 6BTAA5.9-G2, 6 cylinder water-cooled, turbocharged Connection: circuit breaker RCD, 5-wire connection Sockets: 1* 400V 5Px125A, 2* 400V 5PX63A, 2* 220V 2PX16A Frequency : 50 Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger, galvanized soundproofing, cooling water heater Control unit: Comap AMF8, mains feed Dimensions: 3050*1120*1670mm Weight: 2043kg Diesel tank: 275 L Tsdpsncd U Ejfx Anteb At 100% load: 30 L/h At 75% load : 23 L/h At 50% load : 16 L/h Grid monitoring, grid feed-in Soundproofed, ready to use. additional costs 250A automatic switch : 1080 € 400A automatic switch: 1620 € Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min Todpfx Ajuprqwjnteb From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: new, Year of construction: 2024, Everything can be configured according to your needs, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Todpfx Ajfiqgrsnteb Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm Manual gas console for Hypertherm Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head CNC angle cutting head (+/- 45) Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in the research and production of machines for sheet metal processing, with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our showroom offers you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services related to training and customer service. We are now happy to support you from Germany – from consulting to purchasing and throughout the entire life cycle of your machine. With our German branch, we are always there for you, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Tjdjfirx Njpfx Antjb Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: used, Braking unit -Brake with clutch -Power: 0.15 kW -Resetting force: 30 kp Tedpfx Ajdc Iphjntjb -Stroke: 50 mm -Dimensions: 630/320/H460 mm -Weight: 56 kg

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Tsdpsxm Sa Hjfx Antjb Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Condition: ready for operation (used), Year of construction: 1988, machine/vehicle number: 100.613, functionality: fully functional, Machine available for immediate delivery. Forklift available for loading. 2 cylinders per pressing unit. Cylinder stroke approximately 110 mm. Maximum pressing force approximately 1000 kp. Working width 250 - 2500 mm. Working height 250 - 1250 mm. Working depth max. 600 mm. Electric height adjustment of the central vertical unit with scale. Manual adjustment of the central horizontal unit in 50 mm increments with pneumatic clamping. Separate control of the vertical and horizontal pressing units via hand control valve. Tjdpfxoy Tly As Anteb Pressure force regulation 4 - 10 bar.

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm Tedpevxlufofx Antsb casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: refurbished (used), Year of construction: 2020, operating hours: 8,460 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 25.6 V, fork length: 1,150 mm, empty load weight: 445 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical components – each vehicle is thoroughly inspected and repaired. Tedezdi Aaspfx Antsb * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck ERE 120 KP Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2020 Operating hours: 8,460 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 445 kg Load center: 575 mm Tires: Polyurethane Model type: ERE 120 KP Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 288 kg

Condition: used, Emco F3 - Milling Machine Accessories: - Vice - Workplace lighting - Coolant system - Tools & machine feet Todpfx Ansy A Sdyoteb - Operating manual Technical specifications: Working area: - Longitudinal travel: 300 mm - Transverse travel: 200 mm - Vertical travel: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Swiveling vertical milling head: ± 90° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Slot spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: extraction bolt M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slide: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (stepless) - Rapid traverse: 1200 mm/min Coolant system: - Tank capacity: 30 l - Pump capacity: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% duty cycle) - Speed: 1400 / 2800 rpm Dimensions: - Dimensions W x H x D: approx. 1200 x 1900 x 1400 mm - Machine weight: approx. 450 kg

Condition: used, Year of construction: 2012, For sale: Juwent air curtain, type KP/DB-2-144-2; Weight: 67 kg; Year: 2012. Net price: 500 EUR. Price negotiable. Tsdpfxey Sw Uco Anteb

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Tedpov Dxm Sofx Antsb Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Year of construction: 1963, condition: used, functionality: fully functional, machine/vehicle number: D44L/7979, Offer Number: D44L/7979 Machinetype: testing machine Make: LOSENHAUSEN Type: UHP 40000 kp Tedpfxjwi Syzs Antsb Constr. year: 1963 drawing force: 20 - 400 kN drawing distance max.: 1100 mm Pressure: 40 to Location: In our warehouse

Condition: used, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 355 turning speed range 40 - 4000 U/min Tjdpsxv D U Iofx Anteb number of speeds 21 tool taper ISO 40 quill stroke 90 mm feed speeds 2-3000 mm/min rapid traverse longitudinal and cross 6000 m/min rapid traverse Z-axis 5000 m/min distance spindle nose and table 450 mm table travel 495 mm table surface area vertikal 300 x 450 mm fixed clamping table 460 x 800 mm max. loading 350 kp dimensions ca. 3150 x 1800 x 2125 mm weight - pallet system ca. 2380 kg weight of the machine ca. 2,4 t incl. variois tool holders SK 40 manual included

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Manufacturer: REIS Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Press force: 200 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 !! mm Ram return force: 6,000 kg Table load capacity: 10,000 kp Tedpjyb Stqefx Anteb Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 07110-10-6542, functionality: fully functional, operating hours: 200 h, power: 3.25 kW (4.42 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 6,800 mm, grinding height: 240 mm, height adjustment type: electric, grinding belt speed: 1,900 mm/s, actuation type: electric, total length: 3,700 mm, total width: 1,450 mm, overall weight: 300 kg, Equipment: CE marking, documentation/manual, WIDE BELT GRINDING MACHINE, Type LZG-KE Machine type: LZG-KE Year of manufacture: 2010 Machine number: 07110-10-6542 Motor power, grinding belt: 3.0 kW - Total connected load max.: 3.0 kW - Operating voltage: 400 V, three-phase - Operating current: 7.4 A - Type of protection for electrical system: IP 54 - Installation-side connection cross-section: 5 x 2.5 mm² - Installation-side short-circuit protection: 16 A Grinding belt dimensions: 6800 x 150 mm Grinding shoe dimensions: 320 x 145 mm 420 x 145 mm Tsdjzqa Iyopfx Antob Stand overhang: 680 mm Stand overhang height: 340 mm Size of support table: 2500 x 800 mm Permissible weight load on support table: 100 kg Minimum workpiece length when grinding with a grinding shoe: 350 mm Grinding speed: approx. 19 m/s Table height adjustment range: 240 mm Dimensions: see drawing no. 13 Weight: 300 kp New, wide belt grinding machine for sale, only used occasionally. Ready for immediate collection or testing.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 4536/1, Manufacturer: Tvornica Parnih Kotlova (TPK) Zagreb Model / Type: Bkg 40A Steam Output / Capacity: 4,000 kg/h Year of Construction: 1980 Serial Number: 4536/1 Max. Allowed Working Pressure: 12 bar (12 kp/cm²) Tsdpfszuapljx Antob Fuel Type / Burner: Burner for liquid/gaseous fuel (mounted on front door) Included Equipment: Control panel / electrical cabinet, safety valves, pressure gauge, piping, and valve fittings For sale is an industrial steam boiler manufactured by TPK Zagreb, model Bkg 40A, with a steam capacity of 4.0 t/h (4,000 kg/h) and a maximum operating pressure of 12 bar. The boiler comes complete with a front-mounted burner, control cabinet, safety fittings, and associated piping valves. It is ideal for various industrial processes including food processing, textile, chemical, and manufacturing industries. Condition: Used (sold as-is / where-is). Location: Skopje/North Macedonia

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Tsdpfxozdzbus Antob Swivel adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Mechanical counter Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Machine depth: 1200mm Weight: 580kg

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, Equipment: saw blade guard, Italian-made Griggio panel saw, model SC 32 * Carriage length: 3200 mm * Saw blade adjustable from 0-45° * Adjustable fence on the carriage * Motor power: 4 kW * Electric brake Tedpfx Aozn Rc Nentjb * Year of manufacture: 2007 * Maximum blade diameter: 350 mm

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 Todpfx Ajzgtyhjntob 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: good (used), Griggio PSA 530 - Planing width: 53 cm - Electric table lifting - 4 Tersa knives - 4 feed speeds on the gearbox The machine is in very good condition and operates smoothly and quietly. Tsdezv T Azopfx Antsb

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Tedpfx Aev Rlpyentsb Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 Todpfx Aezuw Ixentob - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, functionality: fully functional, plate width: 1,250 mm, Punching force: 30 tons Maximum sheet width: 1,250 mm Maximum sheet length: 2,000 mm Tsdpozvxlzofx Antob Maximum steel thickness: 6 mm Operating speed: 480 strokes/min