Used Grp Barrel for sale (379)

Condition: used, moving point, moving center point, moving Morse taper, moving Hfodpfec S D H Hsx Ahzoi -Center point: 50-85 mm -barrel tip: shaft-mounted -Recording: MK5 -Weight: 5.4 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Hfodpsd R Smxjfx Ahzsi -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/242 mm -Weight: 3.9 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Hjdpfxoc Nir Is Ahzefi -Center point: 75/250 mm -barrel tip: shaft-mounted -Recording: MK7 -Weight: 34 kg

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function Hfjdpfxjzkttcs Ahzji 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Hfodszktkzjpfx Ahzoi Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights Hfsdjzht H Rspfx Ahzoi • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 4977, Leistritz ZSE 60 MAXX-44D Extruder (2018) Comprising: - Leistritz ZSE 60 MAXX-44D twin-screw extruder with - 2x 60 mm diameter screws Hedozhuc Hjpfx Ahzjfi - 40:1 L/D ratio, co-rotating - 10-barrel housing section, electrically heated and water-cooled - 2 degassing ports - 1200rpm maximum screw speed - Motor with Flender direct-driven gearbox

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Hedpfx Aoyw Aa Ushzefi Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 916 mm, Used portal milling machine, model HG3000T, 6-axis milling robot for processing wood, plastic, and GRP parts with two movable tables, each 1000 x 1800 mm Travel ranges: X = 3000 / Y = 2700 / Z = 916 mm Working volume in tandem operation approx. 2400 x 1000 x 600 mm Working volume in synchronized operation approx. 2400 x 2100 x 600 mm Year of manufacture: 2000 / Commissioned in 2001 Hodpfx Ahjzh Uzpozofi Further details, see pictures! The machine runs perfectly and is still in daily use; inspection possible during operation. Sale due to the purchase of a larger new machine. Dismantling, loading, and transport are to be organized by the buyer. (Location: D-88319 Aitrach, total weight approx. 5.5 tons) The sale is made as a used machine, excluding any warranty or guarantee, to commercial customers (B2B). You will receive a proper invoice with VAT shown.

Condition: used, maximum load weight: 1,207 kg, overall weight: 1,800 kg, axle configuration: 1 axle, first registration: 05/2022, loading space length: 3,800 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, Unsinn ASK 1837-13-1770 Lowering Box Body Internal No. for inquiries: 0825639 * Body manufacturer: Unsinn * Type: ASK 1837-13-1770 * Permissible total weight: 1800 kg * Tare weight: 593 kg * Box body * ABS * ELECTRO-HYDRAULICALLY LOWERABLE * Electro-hydraulics for comfortable lowering * Aluminum rod lashing rail, rubberized, on the side * Locking bar * Body: Plywood elements with GRP surface Dimensions (cargo space/loading area) Cargo space length: 3,800 mm Hsdpfx Ajzhp Tajhzofi Cargo space width: 1,800 mm Cargo space height: 1,900 mm ----Price: 9,900 Euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and ????? Typographical errors, errors and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Hedpfx Ahjwzy N Uezjfi Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cubic dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 1/min., Hfsdpfx Ahszhvxpozoi Rated power from 12,000 1/min., with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 separating partition (removable) between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Hsdpfxexhfuaj Ahzjfi Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: used, overall weight: 39,000 kg, first registration: 06/2026, loading space volume: 35 m³, total width: 2,438 mm, total height: 2,670 mm, Year of construction: 2025, !!! NEW !!! WITHOUT PRE-CARRIAGE !!! Type: CIMC Longitudinal Swap Body Tank (CLS) Capacity: 35,000 liters Hfjdpfxey Ebace Ahzoi Tare weight: 4,130 kg Operating pressure (max.): 3.0 bar Test pressure: 4.5 bar Temperature range: -40°C to +130°C Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC Shell: 1.4402 (316L), 3.2 mm, 2B finish Ends: 1.4402 (316L), 4.2 mm, hot-rolled, polished Baffles: 4× vertical, CVC-shaped, corrugated, 70% welded Internal finish: Degreased, pickled, passivated, neutralized Ladder: Stainless steel, right rear, theft-proof Catwalk: Aluminium, anti-slip, 475 mm, with cross-steps Handrail: Folding, telescopic, theft-proof Stacking: Up to 3 units Manhole: Ø500 mm, 316 stainless steel, 8-bolt, EPDM/PTFE Revision openings: 3× Ø300 mm, 316 stainless steel, 4-bolt Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with rupture disc & pressure gauge Air line: 1.5", with ball, safety & non-return valve, gauge accessible from below Vacuum valve: 2" BSP, -0.21 bar Bottom valve: 3", with remote cable closure Steam heating: 8 longitudinal runs, 1" BSP, 3 bar Thermometer: Analog, -40°C to +160°C Insulation: o 50 mm mineral wool (tank & ends) o PU foam under stainless steel straps Cladding: o Shell: 4× 1.8 mm GRP panels Markings: 3× holders for Edgar Weber flip boards, 1× Kemmler mounting bracket Interim sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important notice – Important information: Despite careful review of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute any legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information to initiate contractual negotiations. The information provided here is without guarantee and does not represent warranted characteristics.

Condition: used, functionality: fully functional, machine/vehicle number: 651 (4531040), Year of construction: 2008, For sale is a Palfinger work platform made of GRP (manufacturer: GFK‑Technik, M. Langer), ideal for maintenance, assembly, and service work, especially in electrical environments. The platform offers insulation protection up to 1,000 V and is therefore suitable for work near electrical installations. Note: The Z 147 platform exchange system is required for use. Only for vehicles > 7.5 tons. Features & Advantages Material: GRP (glass fiber reinforced plastic) – corrosion-resistant, lightweight, durable Access: Folding ladder with safety handrail for safe entry Optional equipment: Aluminum tool tray (700 x 100 x 90 mm) Hfjdpfx Ahezhkwgszsi Technical Data Manufacturer: GFK‑Technik, M. Langer (Palfinger) Manufacturer's part number: 651 (4531040) Year of manufacture: 2008 Dimensions (L x W x H): approx. 1,630 x 900 x 1,100 mm Load capacity: 300 kg Insulation protection: up to 1,000 V Required system: Platform exchange system Z 147 Access: Folding ladder with safety handrail Condition Used, well-maintained, functional. Inspection possible by arrangement.

Condition: used, Year of construction: 2005, functionality: fully functional, Used Muller model FTHSM 301 stainless steel drum lifter/blender. Suitable for blending, lifting, inverting and swiveling different type of barrels. Total height of column is 3400 mm, maximal lifting height (clamp axis) approx 2700 mm, maximum load up to 150 kg. Blender has following options: - blending: 2-10 rpm, rotating 360°, manually adjustable clamp inclination up to 30°, adjustable blending time 1-99 min. - inverting: 2 rpm, range 0-180° - lifting/lowering: 3m/min Hsdjzh Enmjpfx Ahzofi - swivelling: manually, max 350° - has a universal clamp with manual clamping operation by handwheel. Includes control panel.

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Hsdszhm Ihepfx Ahzefi Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Year of construction: 2006, condition: ready for operation (used), A complete Battenfeld compact extrusion line for the production of PVC profiles is available. 1) Twin-screw extruder Battenfeld MBEX 2-50-16 V, year of manufacture: 2006, output capacity: 15kg-60kg/h, screw diameter: 52mm, screw length: 16×D, barrel zones: 4, barrel cooling zones: 3, adapter zones: 1, die heating zones: 9, control system: BMCtouch. Including dry vacuum pump, pressure measuring points, clamping flange, water-air separator, blow-off device, mounting elements and hopper cover. 2) Calibration table Battenfeld KP 125 V 2/4m, mounting frame length: 4100mm, mounting rail width: 320mm, longitudinal adjustment: 500mm, transverse adjustment: +/-15mm. 3) Speck vacuum system, pumps: 2, motor power: 2×4kW, operating pressure: 200mbar, max. air capacity: 2×140m³/h. 4) Battenfeld RP 125 SE caterpillar haul-off, passage height: 100mm, contact length: 1100mm, pad width: 160mm, haul-off speed: 15m/min, max. haul-off force: 7kN. 5) Battenfeld SP 63 E underfloor saw, max. cross-section capacity X/Y: 200mm/300mm, sawing accuracy: +/-0.5mm. Overall line dimensions X/Y/Z: approx. 12000mm/1200mm/2000mm, weight: approx. 4500kg, operating hours: approx. 319h. Including chip extraction. The line touchscreen is defective (nothing is visible), however, the line can be operated using an external monitor, mouse and keyboard. Documentation available. An on-site inspection is possible. Hjdpfozg Iqhox Ahzjfi

Condition: reconditioned (used), Overall condition: Very good Hfodpfezfzg Tox Ahzsi Recent maintenance: The cylinder (barrel) was replaced last year.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, in a portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base surface. 2 tables with aluminum table top 1,500 x 2,250 mm with grid drillings. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Hsdpszhbgfjfx Ahzjfi Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically powered roller shutters, 1 partition (removable) between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Movable control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. 2 tables with aluminum table top 3,000 x 1,500 mm with grid hole pattern. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Hodpfxezhbbpe Ahzsfi Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2005, 5-axis CNC machining center MAKA MM 7t, in gantry design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2005 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Hfjdpfx Aszhabzohzoi Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 3,000 x 1,500 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2001, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2001 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 900C, integrated PC with 1MB memory and 3.5'' floppy disk drive. Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. Hodpfjzg U A Rjx Ahzjfi 1 x universal head for 5-axis milling with 90° head, 1 x high-speed milling spindle HSD 8 kW, SK 30 (ISO 30) Speed continuously adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., air-cooled. Tool holder SK 30 with automatic tool changer. 1 x moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. 2 x tables with aluminum table top 1,500 x 1,500 mm with grid hole pattern. The tables can be coupled to machine larger components. 1 x pneumatic clamping system per table. 1 x vacuum clamping system per table. 1 x minimum quantity lubrication system with spray nozzles. Work safety: 2 x sliding doors, manually operated, for front loading. With partition between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, the machine can be inspected there.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Hfodpfxeypat Ie Ahzsi Chip collection box

Condition: used, TECHNICAL DETAILS - Minimum/maximum bar diameter : 8-25.4 [mm] - Maximum workpiece length : 120 [mm] - Spindle speed : 5,000 [rpm] - Spindle power : 18 [kW] - Number of digital axes : 17 - Barrel locking with Hirth teeth - Dimensions : 3500 x 1600 x 1950 [mm] - Weight : 8,500 [kg] MACHINE HOURS Hfodsuharfspfx Ahzei - Powered hours : 63,341 [h] EQUIPMENT - TORNOS TB DECO CNC - Spindle stop - Counterspindle with counter-operation device - Single end milling machine - Polygon milling machine - Central block drilling machine - Pick-up machine - Turning tool holders - Bar feeder: IEMCA SIR 25 P - KNOLL lubrication tank - Chip conveyor - Cutting oil air conditioning