Used Grp Barrel for sale (379)

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6 000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] Hfsdpfx Asuhaqzjhzji - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - 1 Bar feed cam parts 60 [mm] - 1 Auxiliary camshaft drive - 1 Pick-up. 20 [mm] with lever - Hirth cylinder barrel locking - 8 cross slides, stroke 30 [mm], optional - Central slide, stroke 60 [mm] - Cutting oil tank with magnetic drum conveyor - Coolant pump capacity 150 [l/min] - Iemca PRA52/33F bar loader n°020651PA03, year 2006

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] Hsdpfx Aeuhaqnshzsfi - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - Hirth cylinder barrel locking - Bar feeder Iemca PRA40/33F

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] Hjdpfx Ahsuhap Rozefi - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 Hsdpfxouhap Ds Ahzjfi - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, TECHNICAL DETAILS - spindle number : 8 - number of turning slides : 8 - number of longitudinal posts : 8 - max. bar clearance : round Ø 22 [mm] - max. bar clearance : hexagonal 19 [mm] - max. bar clearance : square 15 [mm] - max. feed length : 60 [mm] - number of spindle speeds : 20 - spindle speeds : 620 to 6035 [Rpm] Hodpeuhapkefx Ahzofi - number of camshaft speeds : 24 - spindle stop - max. production : 1-50 [part/min] - transversal slides strokes : 30 [mm] - independent feeds max. stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4 700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - chip conveyor

Condition: used, TECHNICAL DETAILS Hfsdpfx Ahsuhapdszji - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - spindle stop - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, Hfjdszg Imcspfx Ahzei 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid hole pattern. To machine larger components, the tables can be coupled. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 1 minimum quantity lubrication system with spray nozzles per milling spindle. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: Southern Thuringia / Germany, where the machine can be inspected.

Condition: used, Year of construction: 2006, 5-axis CNC machining center MAKA MM 7t DK, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2006 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm tool height Hsdszg E E Nepfx Ahzefi A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with automatic tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid drillings. The tables can be coupled to process larger components. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 1 minimum quantity lubrication system with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: Southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2006, 5-axis CNC machining center MAKA MM 7t, portal design with two tables for alternating operation. Year of construction: 2006 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 900C, V-CNC card, memory approx. 8 MB, in the integrated PC. • Portable control panel BWO Vektor MP (mobile panel), with stand. Technical data: Working areas / cubic dimensions: for tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 196° (+/- 98°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 1 high-speed milling spindle HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. 2 tables with aluminum table top 1,500 x 1,500 mm with grid drilling. To machine larger components, the tables can be coupled. Hedpfxezg Efpe Ahzsfi 1 pneumatic clamping system per table. 1 minimum quantity lubrication system with spray nozzles. Work safety: 2 manually operated swing doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically powered roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 62,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 70 mm, displacement volume: 1,077 cm³, Clamping unit: Clamping force 2500 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1877 bar Stroke volume 1077 ccm Shot weight (PS) 980 gr. Injection rate 385 ccm/s Screw speed 220 1/min Plasticising rate max. 76 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Hfjdpfxszfpthe Ahzsi Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 310 mm -Width: 82 mm -Inner diameter: 200 mm -Weight 22.8 kg Hfodpfx Asb A Ip Ashzoi

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Version: cc/w33 -d= Inside: 220 -D = Outside: 340 -B = Width: 90 -Weight: 30 kg Hfjdpfxob A Imwj Ahzei

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Hfsdpfozgtyhox Ahzei Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 72,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 100 mm, displacement volume: 2,827 cm³, Clamping unit: Clamping force 4200 kN Mould opening force, max. 250 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 800 x 800 mm Mould opening stroke 1020 mm Mould height min 380 mm Max. daylight 1400 mm Hodozd Smbepfx Ahzefi Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1490 bar Stroke volume 2827 ccm Shot weight (PS) 2573 gr. Injection rate 746 ccm/s Screw speed 195 1/min Plasticising rate max. 165 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,60 x 2,50 m Total machine weight 23500 kg Max. mould weight 6700 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR 150 X: 900 mm, Servo Y: 900/900 mm, Servo Z: 2500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve on movable plate - 1 x core pull on movable plate - 6 x Hotunner controller - Accumulator - Robot inteface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67 Hedpfezd Er Rox Ahzofi

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Hfsdpfxjymn Nfo Ahzsi Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Hjdpfxjuw Dnxo Ahzsfi

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters Hsdpfxsx Sqi Hj Ahzsfi GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Manufacturer: Labtech Engineering Co., Ltd. Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Hfsdpfx Aezgwlzehzsi Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Included in the Sale Complete 3D filament extrusion line Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Material dryer Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, New conveyor belt equipped with a metal detector. 110 kW motor with frequency inverter, new. Hfedpfxewqrrte Ahzsi Vacuum system with two zones. Erema double-piston screen changer. Die-face cutting system; water cooling; centrifuge; conveying fan. One barrel and two used spare screws

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,700 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction description? Truck with trailer (MAN, beverage body) General The vehicle is a MAN truck with beverage bodywork, including a trailer combination. The truck is configured as a drawbar combination (tractor unit + trailer) and is primarily used in beverage transport applications. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Large sleeper cab, suitable for long-haul transport Hjdpfxoy Nuqps Ahzsfi * Interior features: * Multifunction steering wheel with integrated controls * Clearly arranged dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, sleeper berth behind the seats 2. Body (truck + trailer) * Type: Beverage body / box body * Material: Aluminum/composite construction, insulated * Roof: Translucent tarpaulin roof (visible from inside), provides daylight for loading/unloading * Internal floor: Durable wooden floor, heavily used, suitable for roll carts, pallet jacks, or pallets 3. Trailer * Type: Central axle trailer, also with beverage body * Axles: 2 axles 4. Application * Mainly for transporting beverages in crates or barrels * Large cargo volume due to combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading 5. Special Features * Clean interior * Spacious cargo area with reinforced floor * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,700 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction description? Truck with trailer (MAN, beverage body) General The vehicle is a MAN truck with beverage bodywork, including a trailer combination. The truck is configured as a drawbar combination (tractor unit + trailer) and is primarily used in beverage transport applications. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Large sleeper cab, suitable for long-haul transport * Interior features: * Multifunction steering wheel with integrated controls * Clearly arranged dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, sleeper berth behind the seats 2. Body (truck + trailer) * Type: Beverage body / box body * Material: Aluminum/composite construction, insulated * Roof: Translucent tarpaulin roof (visible from inside), provides daylight for loading/unloading Hfjdpfx Ahew Ii A Njzji * Internal floor: Durable wooden floor, heavily used, suitable for roll carts, pallet jacks, or pallets 3. Trailer * Type: Central axle trailer, also with beverage body * Axles: 2 axles 4. Application * Mainly for transporting beverages in crates or barrels * Large cargo volume due to combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading 5. Special Features * Clean interior * Spacious cargo area with reinforced floor * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher Hfsdpsr I S H Ejfx Ahzji COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,700 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction description ? Truck with trailer (MAN, beverage body) General The vehicle is a MAN truck with a beverage body and trailer combination. The truck is designed as a drawbar combination (rigid truck + central axle trailer) and is primarily used in the beverage transport sector. Hodpfxox R Rcwe Ahzofi 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Large space sleeper cab, suitable for long-distance haulage * Interior equipment: - Multifunction steering wheel with controls - Clear dashboard with analog round dials - Air conditioning and ventilation system - Passenger seat, sleeping bunk behind the seats 2. Body (Rigid truck + trailer) * Body type: Beverage body/box body * Material: Aluminum/Composite construction, insulated * Roof: Translucent tarpaulin roof (interior visible), ideal for daylight use during loading/unloading * Interior floor: Robust wooden floor, heavy-duty, suitable for trolleys, pallet trucks, or pallets 3. Trailer * Type: Central axle trailer, also with beverage body * Axles: 2 axles 4. Intended use * Mainly for transporting beverages in crates and barrels * Large loading volume due to truck and trailer combination * Easily accessible from the side and rear for fast loading/unloading 5. Special features * Clean interior * Spacious loading bay with sturdy flooring * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: used, mileage: 268,000 km, power: 140 kW (190.35 HP), first registration: 01/2018, fuel type: diesel, overall weight: 4,800 kg, color: white, gearing type: automatic, number of seats: 5, total height: 2,850 mm, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 519 4x4 WAS Case Financing or rental possible with new original Mercedes Benz MOTOR and overhauled gearbox MB Sprinter RTW according to DIN EN1789 / DIN EN 13500 Sandwich box body incl. additional hot water heating, etc. * Sendwisch aluminum/GRP box body with lowered box removal door, vacuum mattress door inside * Rear portal: work lights, reversing camera * Vehicle lights and flashing lights * Rear of vehicle fitted with spring-mounted impact protection / rear step * Ceiling center, patient compartment floor, design of the doors, pull-out cabinets, compressor refrigerator, flaps, equipment holders, oxygen lines, blue light system CAN bus central electrics, lighting of the exterior storage compartments and interior lighting correspond to the standard EU version RTW. with all-wheel drive * Each stretcher system is customizable, very very good condition ready for immediate use / vehicle is reconditioned no dents or scratches / stretcher possible for an extra charge / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heating / power steering / stabilizer reinforced / tachograph / air conditioning / immobilizer / rear working light, outside connection 220V / fire extinguisher / center armrest / reversing camera / reading lamp / radio pre-installation / optical signaling system / beam & front flasher acoustic signaling system. Financing or installment plan possible !!! Our used special vehicles are checked, prepared and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or Dekra seal is as self-evident as the immediate operational readiness of all rescue vehicles. FZ is almost like new !!! On this RTW we grant a guarantee of 12 months !!! Sold without medical and technical equipment, but can be purchased separately. Our service - for you ! * 20-40 immediately available RTW always immediately available in our company Hjdpfx Astn Uaiehzjfi * DEKRA or TÜV SIEGEL on request * FINANCIAL SERVICE - financing - leasing or installment plan can be individually tailored to your needs * WARRANTY - up to 36 months possible at extra cost * Accident replacement vehicles in stock * Reconditioning - All vehicles are professionally prepared and reconditioned for you by our team * Further vehicle offers and service points can be found under: We look forward to your call / The G&G team is at your disposal at any time. We speak Italian - English - Polish - Spanish and can certainly help you if you are looking for a good used ambulance. This advertisement serves only as a preview of our vehicle and is not part of a sales contract. Information given on the Internet are non-binding descriptions and do not represent guaranteed characteristics. The seller is not liable for errors, input errors and data transmission errors. Subject to changes and prior sale!