Used H Frame Double Acting Hydraulic Press for sale (77,654)

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Gusdogta Rcspfx Alxjb Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: good (used), Pressing force 200 to table: 1500x1000 mm motor: 45 kW weight: 18000 kg Gusdpfxsgvz Hxe Alxsb Stand width:1500mm dimensions: Machine: 5500x2610x2150 mm

Condition: new, Year of construction: 2025, pressing force: 2,500 t, stroke length: 1,000 mm, table width: 1,800 mm, table length: 2,600 mm, retraction force: 800 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered for heavy-duty deep drawing applications that require extremely high tonnage, large bed dimensions, and precise blankholder force. The 8-gibbed H-frame structure ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over the entire stroke. The CHSP 2500/800 model provides maximum stability, controlled material flow, and repeatable production performance for large and deep drawing dies, with a 2500-ton main ram and 800-ton blankholder capacity. Its vibration-stress-relieved welded steel frame is designed for durability and reliability in heavy industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-gibbed H-frame press body • Vibration stress-relieved frame • Bronze Zr14 gibbed slideways Guodpox N Uk Ajfx Alxeb • WPQR- and WPS-approved welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” touchscreen panel (DELTA) • Adjustable stroke control for ram and blankholder • Adjustable tonnage (pressure) control for ram and blankholder • Automatic lubrication system • Electronic filter contamination warning • Hydraulic oil temperature and system status monitoring on-screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Welded steel construction, 8-gibbed H-frame press Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blankholder): 2500 / 800 Ton Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blankholder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blankholder Cylinder: Ø450 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,500 mm, retraction force: 600 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Gib Design General Description The CRONOSSTECH CHSP Series H-type hydraulic deep drawing presses are engineered for heavy-duty deep drawing applications that require extremely high tonnage, large table dimensions, and controlled blank holder force. Thanks to its 8-gib H-frame construction, ram and table movements are carried out under high rigidity throughout the pressing cycle, maintaining strict parallelism and perpendicularity tolerances even across long strokes. The CHSP 2000/600 model offers high precision and repeatability in large-volume die, deep drawing, and stamping operations with its 2000-ton main ram and 600-ton blank holder capacity. Its stress-relieved, steel-welded frame structure is designed for longevity and reliability under heavy industrial conditions. ⚙️ Standard Features • Steel-welded construction, 8-gib H-frame press body • Stress-relieved frame through vibration methods • Zr14 bronze gib bushings • WPQR and WPS certified welding by TÜRK-AK accredited standards (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and blank holder stroke controls • Adjustable tonnage (pressure) control for ram and blank holder • Automatic lubrication system • Electronic hydraulic filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Offline filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel-welded, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gjdpfx Alox N Ukvsxoub Gib Bushings: Zr14 bronze Capacity (Ram / Blank Holder): 2000 / 600 tons Moving / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 microns/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 pcs) Blank Holder Cylinder: Ø390 mm – Ck45 (2 pcs) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 105 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,500 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,400 mm, retraction force: 500 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for maximum frame rigidity, precise parallelism, and long-lasting operation in high-tonnage deep drawing applications requiring large bolster dimensions. Thanks to the 8-guide H-frame body, the ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, with 1500-ton main ram and 500-ton blank holder capacity, is developed for large-dimension dies, deep drawing, and precise forming operations. The vibration stress-relieved welded steel frame delivers high durability and reliability under heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame design • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system Guodpfx Ajx N Ukislxsb • Electronic contamination warning for the filter • Monitoring of hydraulic oil temperature and system status via display • Off-line filtering and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame design Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 tons Moving / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, retraction force: 400 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Stamping) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic stamping and deep drawing presses are designed to deliver maximum rigidity, precision, and process control in sheet metal forming applications requiring high tonnage. The 8-guideway H-frame structure ensures stable maintenance of parallelism and perpendicularity tolerances even with large table dimensions. The CHSP 1200/400 model, featuring a 1200-ton main ram and a 400-ton blank holder capacity, is tailored for heavy industry applications requiring deep drawing, stamping, and controlled material flow. Its vibration-stress-relieved steel construction frame guarantees long-lasting and reliable performance. ⚙️ Standard Equipment • Steel construction, 8 guideway H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 gib guides • WPQR and WPS certified welding by TURKAK-accredited institutions (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7'' DELTA touchscreen panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring of hydraulic unit oil temperature and system status on screen • Offline filtration and industrial cooling system • SIEMENS – SCHNEIDER industrial switchgear • Industrial safety features for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8 guideway H-frame body type Frame Material: St52 – ERDEMIR Gib Guide Material: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Blank Holder): 400 Tons Moving / Fixed Table: 1500 × 2000 mm Gjdpfx Ajx N Uirelxeub Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Clearance (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Blank Holder Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, retraction force: 350 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-guide H-frame structure, high rigidity is ensured during pressing operations, and parallelism and perpendicularity tolerances are consistently maintained even with large bed dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and 350-ton blank holder capacity, is specifically designed for deep drawing processes requiring controlled material flow—ideal for applications in automotive, white goods, defense, and heavy industries. The welded steel construction, stress-relieved by vibration, guarantees long-term, reliable operation. ⚙️ Standard Equipment Gjdpfx Alex N Uilexeub • Welded steel construction, 8-guide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder (pot) stroke control • Adjustable ram and blank holder (pot) tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Welded steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1000 tons Capacity (Blank Holder): 350 tons Moving/Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 800 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, retraction force: 270 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Sinking) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed based on the double-acting principle (ram + blank holder) for high-tonnage sheet metal forming, deep drawing, and sinking applications. The 8-guided H-frame structure offers high rigidity, stable parallelism, and extended die life even with large table dimensions during the pressing process. The CHSP 800/270 model, with its 800-ton main ram and 270-ton blank holder capacity, is specifically engineered for processes requiring controlled material flow in automotive, white goods, defense industry, and heavy sheet metal forming applications. The vibration stress-relieved steel frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guided H-type press frame • Vibration stress-relieved body structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding (accredited by TÜRK-AK) (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert • Real-time monitoring of hydraulic unit oil temperature and system status via screen • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical components • Operator safety systems for maximum protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-guided H-type press frame Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Capacity (Blank Holder): 270 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Stroke (Blank Holder): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Guodpfx Alex N Uh Usxjb

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 200 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the extended stroke length. Model CHSP 600/200, featuring a 600-ton main ram and a 200-ton blankholder (cushion) capacity, is designed to ensure full control over the die and component during high-tonnage deep drawing and spinning operations. The frame structure is stress-relieved by vibration for durable and reliable performance. ⚙️ Standard Equipment - Welded steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK-accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter clogging warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components Guedpfsx N Uhzsx Alxsb 📐 Technical Specifications — CHSP 600/200 - Type: Welded steel, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR grade - Slide Bearings: Bronze Zr14 - Capacity (Ram): 600 tons - Capacity (Cushion): 200 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 1000 mm - Cushion Stroke: 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017), supervised by certified “welding coordination engineers” (EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s - Main Cylinder Bore: Ø550 mm – Ck45 - Cushion Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5900 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2300 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Scale: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 35 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 175 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The 8-guide H-frame construction provides maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 500/175 model features a 500-ton main ram and a 175-ton cushion ram (pot), designed to deliver complete control over the die and workpiece for high-tonnage deep drawing and forming operations. The machine frame is stress-relieved by vibration to ensure a durable and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alert Gedpfxox N Uhus Alxjub - Monitoring of hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Integrated operator safety systems - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 500/175 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMIR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 500 Ton - Capacity (Cushion): 175 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures monitored by “welding coordination engineers” certified under EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Approach Speed: 150 mm/s - Moving Table Forming Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Cushion Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø500 mm – Ck45 - Cushion Cylinder Bore: Ø300 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Scale: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 26 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 400 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 150 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The H-frame structure with 8 guideways provides maximum rigidity during the pressing cycle, and maintains parallelism and perpendicularity tolerances consistently over long strokes. The CHSP 400/150 model, with a 400-ton main ram and 150-ton blank holder ram (pot), is designed for deep drawing and forming applications that require high tonnage. The frame is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Stress-relieved frame via vibration - Bronze Zr14 guide slippers - WPQR and WPS approved welding by TÜRK-AK accredited certification (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conform to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel Gjdpfx Alsx N Uhhjxoub - Adjustable ram and blank holder (pot) stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filtration contamination warning - Monitoring of hydraulic unit oil temperature and system status on display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMIR Guideway Liners: Bronze Zr14 Capacity (Ram): 400 Tons Capacity (Pot): 150 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1000 mm Stroke (Pot): 350 mm Min. Open Height: 100 mm Max. Open Height: 1100 mm Stress Relieving: Vibration method Welding Application: WPQR & WPS approved by TÜRK-AK accreditation EN ISO 15614-1:2017 (Welding applications are supervised by certified "welding coordination engineers" per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Rapid Descent Speed (Movable Table): 150 mm/s Forming Speed (Movable Table): 12 mm/s Return Speed (Movable Table): 170 mm/s Forward Speed (Pot Table): 30 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Pot Cylinder Internal Diameter: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 100 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses have been developed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, featuring a 300-ton main ram and a 100-ton bottom cushion ram (pot), is specially designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved using vibration methods for long life and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Vibration stress-relieved frame - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable stroke control for both ram and cushion (pot) - Adjustable tonnage (pressure) control for ram and cushion (pot) - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on screen Godpex N Uhbjfx Alxjub - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, H-frame with 8 guideways - Body Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Ton - Capacity (Cushion): 100 Ton - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Clearance: 100 mm - Max. Clearance: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TURK-AK EN ISO 15614-1:2017 (Welding applications are supervised by "welding coordination engineers" certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Spinning Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Cushion Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 4400 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides maximum rigidity during the pressing process, while parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton lower cushion (pot) capacity, is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to guarantee long-lasting, reliable performance. ⚙️ Standard Equipment Gujdpfex N Uaqsx Alxsb - Steel construction, 8-slide H-frame press design - Vibration-stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke control for ram and cushion (pot) - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination indicator - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Certification: WPQR and WPS by TÜRK-AK accreditation EN ISO 15614-1/2017 (Welding procedures are overseen by certified “welding coordination engineers” per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Measurement: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 70 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and flanging applications. The 8-slideway H-frame construction provides maximum rigidity during pressing operations, maintaining parallelism and perpendicularity tolerances consistently throughout the stroke. The CHSP 200/70 model, featuring a 200-ton main ram and a 70-ton lower blank holder (pot) capacity, is engineered for medium-to-high tonnage deep drawing and flanging processes. The frame structure undergoes vibratory stress relief for long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8 slideways - Vibratory stress-relieved frame - Bronze Zr14 slideway bearings - Welding processes verified by TÜRK-AK accredited WPQR and WPS certificates (EN ISO 15614-1:2017 / EN ISO 14731 compliant) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety interlock systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, H-frame with 8 slideways Frame Material: St52 – ERDEMIR Slideway Bearings: Bronze Zr14 Capacity (Ram): 200 tons Capacity (Pot): 70 tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 800 mm Pot Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1:2017 (Supervised by certified "welding coordination engineers" as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Pot Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø320 mm – Ck45 Pot Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 Units Approx. Height of Press: 3800 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2200 mm Distance from Floor to Lower Table: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 13.5 tons Gujdpsx N T U Tjfx Alxob Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 50 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-action working principle to provide controlled material flow for sheet forming, deep drawing, and stamping applications. The 8-guideway H-frame design ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model, featuring a 150-ton main ram and 50-ton blankholder (cushion) capacity, is designed for precise and repeatable deep drawing processes. The frame construction is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8 guideways - Stress-relieved frame via vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alert - Hydraulic oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, H-frame press body with 8 guideways Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Capacity (Cushion): 50 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Gujdex N T U Hspfx Alxob Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certification accredited by TÜRK-AK EN ISO 15614-1/2017 (Welding applications supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Advance Speed: 30 mm/sec Main Cylinder Inner Diameter: Ø280 mm – Ck45 Cushion Cylinder Inner Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Screen: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 11 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 40 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flanging operations. The 8-side guided H-frame structure guarantees maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances over the entire stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton cushion ram (blankholder), specifically designed for precision deep drawing and flanging operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 sliding guides - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame body with 8 sliding guides - Frame Material: St52 – ERDEMİR grade - Slide Bearing: Bronze Zr14 - Capacity (Ram): 100 Tons - Capacity (Cushion/Blankholder): 40 Tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 600 mm - Stroke (Cushion): 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress-relieving - Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (certified welding coordination engineers supervise per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 Gujdex N T Uyspfx Alxjb - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Flanging Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Distance from Floor to Lower Table: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Gusdpfju Axfcox Alxjb Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. Gedjy E Ey Tepfx Alxsub The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Gusdpjv Sd S Nsfx Alxsb Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 2019, Air-operated double-acting high-pressure pump The Resato P200-100-2 is an air-operated, double-acting high-pressure pump used for pressurizing liquids in various industrial applications such as hydrostatic testing and chemical injection. Gusdpfxeyk Uc He Alxob The Resato P200-100-2 pump operates on the principle of an automatically reciprocating differential piston to convert compressed air into a high-pressure liquid flow. Manufacturer: Resato Type: P200-100-2/U/V Type: Air-operated, double-acting high-pressure pump Air piston diameter: 200 mm Torque ratio: 100 Flow rate: 6.6 l/min Weight: 21 kg Year of manufacture: 2019 Max. outlet pressure Regulated by the air supply pressure. At 7 bar (100 psi) air pressure, the static ultimate pressure is up to 700 bar (~10,000 psi) (based on the Resato type table for P200-100-1/P200-100-2). Compatible media Suitable for water, oil, or an emulsion of both. Can also be used for a wide range of chemical fluids. Materials (wetting parts) All wetted parts are made of specially selected stainless steel. Operating Medium (Drive) Can be operated with compressed air or nitrogen at a maximum pressure of 7 bar (100 psi). Features Reduced noise, minimized downtime due to easy maintenance of seals and check valves, and prevention of pump freezing. Applications The P-Series, to which the P200-100-2 belongs, is used in various industries, including oil and gas, automotive, and research. Typical applications include: Hydrostatic testing of hoses, valves, pipes, and pressure vessels. Pressurization of hydraulic components. (Chemical) injection. Disassembly of bearings and bolt tensioning. Research and development. Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Guodpfx Aletndu Usxeb CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WE OFFER AN BEAUTIFULL CONDITION DEEP DRAWN PRESS 160 TON WITH BACK FORCE BOTTOM 70 TON MACHINE WAS BUILD ON ORDER MACHINE WAS USED ONLY A COUPLE TIMES PER YEAR FOR SOME SMALL PARTS. CONDITION IS EXCELLENT . NEWER RUN A PRODUCTION. WE CAN ALSO DELIVER MACHINE FOR A CUSTOMER Gjdpfx Aevxbn Uolxjub TABLE SIZE: 1030 X 630 OPEN GAP: 740 MM TOTAL WEIGHT APPROX 8000KG DIMENSION 1500 X 1500 X 4000

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 215 mm, throat depth: 410 mm, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Guedpfx Aey Ix Ipjlxjb Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors 2 manual backgauge fingers

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm Guedpfxjwz Rv Ee Alxsb no. of strokes 60-300 Hub/min table surface area 730x750 mm weight of the machine ca. 14 t

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Guedpfx Asykbcmelxjb Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.