Used Hebrock Edgebander Hebrock F4 Next for sale (2,803)

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Tsdpfx Aszp Nz Heklea Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Todpfx Aezp Nycjklea Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Tsdpfxszqz Rio Aklja Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 52750063763798, load capacity: 227 kg, overall weight: 2,090 kg, fuel type: electric, product width (max.): 810 mm, working height: 9,850 mm, enginetype: Electric, manufacturer: Genie Tedszqcbpspfx Akloa

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 52750053278038, load capacity: 227 kg, overall weight: 1,300 kg, fuel type: electric, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Tjdpfozqcbijx Akloa

Condition: excellent (used), Year of construction: 2025, machine/vehicle number: 52011188486486, load capacity: 454 kg, overall weight: 1,970 kg, fuel type: electric, product width (max.): 1,180 mm, working height: 9,960 mm, enginetype: Electric, manufacturer: Genie Tjdpfx Akozqcalelea

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 52011170464086, load capacity: 350 kg, overall weight: 3,170 kg, fuel type: electric, product width (max.): 1,170 mm, working height: 13,940 mm, enginetype: Electric, manufacturer: Genie Tjdszqcafopfx Aklea

Condition: excellent (used), Year of construction: 2025, machine/vehicle number: 52011129438550, load capacity: 350 kg, overall weight: 3,170 kg, fuel type: electric, product width (max.): 1,170 mm, working height: 13,940 mm, enginetype: Electric, manufacturer: Genie Tjdpfjzqb U Uox Akloa

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trim blades. Good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the shown ducting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure, manual adjustment with crank and SIKO counter Infeed fence, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Tedpszn Afpjfx Aklsa Total of 2 interchangeable glue tanks for quick color change from white to transparent Gluing section with automatic edge feed for roll material up to 3mm Pressure zone with 3 rollers Cut-off saw with 2 motors Combination milling unit, easily adjustable by hand for flush milling, chamfer, and radius Corner rounding cutter R2 with diamond cutter, 1 motorized Radius trim blade R2, manually adjustable Glue joint trim blade with large roller, pneumatically controlled Hood lock CE marking Operating manual as a folder All indexable inserts of the milling units and trim blades have been replaced or re-sharpened, saws sharpened, diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2126, functionality: fully functional, Equipment: documentation/manual, Element feeding and retrieval - Clamping beam with clamping strip - Preparation for connecting a return system - Variable feed rate: 8-18 m/min - Automatically adjustable guide rail for groove, height of clamping beam, and clamping zone Edge banding - AQ65 glue pot - PUR pre-melter, 8 kg/h - Finishing of the element - Anti-adhesive and cleaning fluid - Unit for processing corners with a double profile FLEXTRIM - Cutting unit - Multifunctional unit for profiling with R-2 and R-1 tools - Edge milling unit with R-2 and R-1 tools - Flat profiling, polishing unit (top and bottom) Documentation - Selected languages: Croatian - Format: Data carrier + paper documentation General information - Control system: HOMAG POWERTOUCH control system - CE marking: YES - Commissioning status: Pending – planned date: June 2026 - Machine length: 6075 mm Tjdpfxeza D E Ae Aklsa - Year: 2018 - Number of processed meters: 2.5 million

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Tsdpozqapksfx Aklja Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: used, Holz Her Sprint 1329 Black Edition Todpfx Akozdzlmelea Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Infeed area: electronically controlled release agent spray device Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock, Lieboch

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, - Year of manufacture: 2020 - Made in Bulgaria - DTR, CE TECHNICAL SPECIFICATIONS: – Height of workpieces: 8-45 mm – Minimum length of workpiece: 100 mm – Minimum width of workpiece: 100 mm – Edge thickness: 0.4-3.0 mm – Feed rate: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW – Milling unit: 12,000 rpm – Corner rounding unit - minimum length of workpieces: 250 mm – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1x 1.1; 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge trimming unit: – Glue removal unit: – Polishing unit - motor power: 2x0.18 kW – Polishing unit: 2800 rpm – Extendable support with rollers: – Diameter of dust extraction nozzles: 120 mm Todsw H Ryuopfx Akloa – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions - L x W x H: 4130x1220x1470 mm – Weight: 1180 kg

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Tedszp Hc Ujpfx Akloa Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Todpfx Asu Hldmeklsa Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 2933751040F, functionality: fully functional, operating hours: 3,940 h, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, actuation type: pneumatic, total length: 2,540 mm, total width: 1,485 mm, overall weight: 670 kg, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, We are offering this very well-maintained SCM OLIMPIC K201 edge banding machine, manufactured in 2005. Machine features: with pneumatic trimming unit, flush-cutting unit, radius/flush-routing unit, radius-pulling blade unit, polishing disc unit. Price: 4,900.00 EUR net ex works Rodgau plus VAT, loading costs and shipping. Todpozmxxijfx Aklja If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, A Great Machine for edging doors and cabinets with solid edging, this machine will do a 20mm solid edge. Tsdpfxjzif Ezs Aklsa

Condition: used, Edgebander Holzher Sprint 1317 pre-milling units glue application, glue cartridge pneumatic pre-cut guillotine pressure rollers trimming saws top-bottom milling units corner rounding profile scraper Tjdpfx Ajx Tf D Ujklsa flat scraper Max. edging height (mm): 50 Edge thickness from roll: 3 mm Feed speed: 10 m/min The machine requires servicing, adjustment, and calibration. It can be started and all units power on, but the front saw does not react to material and the corner rounding unit requires adjustment.

Condition: good (used), mileage: 916,442 km, power: 368 kW (500.34 HP), first registration: 03/2017, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,120 mm, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Hydraulic system - Alloy wheels - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8454 kg, Gross weight: 20500 kg, Total tank capacity: 1000 liters, Height of fifth wheel coupling: 119 cm, Fifth wheel coupling: Fixed, Winch pulling capacity: 388 tons, Alloy wheels, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 368 kW (493 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Retarder, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12 gears, Automatic Tjdpfx Akjzlx T Djlja Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 4 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 12 mm; Tire tread depth left outside: 12 mm; Tire tread depth right inside: 13 mm; Tire tread depth right outside: 10 mm; Suspension: Air suspension Weights Unladen weight: 8,454 kg Payload: 12,046 kg GVW: 20,500 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and model years in various price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), C.E. Tjdpfszn I Hfjx Aklsa

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Tjdpfxjy Dd Iye Aklja Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Overall length: 3700 mm Width: 1440 mm Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim

Condition: excellent (used), Year of construction: 2011, Edge banding machine Manufacturer: Biesse Type: Akkron 440 Year of manufacture: 2011 Edge band thickness: 0.4 - 3 /10 mm Workpiece thickness: 10-60 mm Feed rate: 18 m/min Workpiece thickness adjustment: Electric Overall length: approx. 5,100 mm Gluing unit: Yes Trimming saw unit: Yes Tsdezltbiopfx Aklea Flush trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Straight trimming blade: Yes Scraping unit: Yes Spray device: Yes

Condition: excellent (used), Year of construction: 2019, Edge banding machine Todpfx Akezlr Nfelsa Manufacturer: Felder Type: Tempora 45.03 L Year of manufacture: 2019 Workpiece thickness: 8-45 mm Edge thickness: max. 3 mm Min. workpiece length: 140 mm Feed rate: 9 m/min Total power consumption: 14.5 kW Number of workpieces: approx. 75,400 pieces Total edge length: approx. 59,300 m Jointing unit: Yes Miter saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius drawing blade: Yes Straight drawing blade: Yes Buffing unit: Yes Spray device: Yes

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Tedpezmtldefx Aklsa Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Tedszmtkaopfx Akloa Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657