Used Hitema Eca012 Chiller for sale (905)

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested. Iodpfx Ajdtr A Tomgeih

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 Ijdpfsg Ewwrex Amgeih -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, type of cooling: air, For sale: 8x Nordmann AT4 humidifiers. Brand new units, immediately deployable and easy to refill. Suitable for industrial applications and HVAC systems where precise humidification is required. Quantity: 8 units Iiodpfxstnccks Amgeh Condition: New Immediately available Note: Sale as a set Transport available on request

Condition: new, Year of construction: 2024, The FAS series are air-cooled refrigeration systems for industrial use. They are installed outdoors. The equipment of the FAS 064 is as follows: closed internal tank as well as a 3 bar pump and scroll compressors, winter package down to -10°C, The evaporator is a tube bundle installed in the internal tank. The refrigerant used is R454B Iodpfx Aor D R Ubsmgeih Cooling capacity at 12/7°C and 35°C ambient temperature 49kW

Condition: not inspected (used), Pouch making machine for liquids, hot or cold fill. Ideal for packing Soups, Sauces, Condiments (Ketchup, Mustard, Mayonnaise), Salad Dressing, Tomato Based Products (Pizza Sauce, Spaghetti Sauce), Liquid Eggs. Ijdoig Ht Iopfx Amgjih We have two identical machines here from the same sauce factory. Many other machines including kettles, sauce coolers, glycol chillers etc.

Condition: excellent (used), Lennox PU-06D L02 Condenser Neostar range, Twin fan system, with Tecnac liquid receiver Iiodpfx Ameqqiykogoh

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT Bus CNC System, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: 6kW Fiber Laser Source, laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 8 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, workpiece weight (max.): 1,000 kg, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 9,000 kg, total length: 9,000 mm, total width: 3,400 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Metal Technics Polska MTP-FL3015R-6KW Enclosed Fiber Laser with Rotary Axis Manufacturer: Metal Technics Polska Model: MTP-FL3015R-6KW Condition: Brand New / Factory New Laser Power: 6kW (6000W MAX Photonics Fiber Laser) Control System: FSCUT Bus CNC Control System Laser Head: Ospri Intelligent Autofocus Cutting Head Working Area (Sheets): 1500 x 3000 mm Tube Processing: 6000 mm length – Round: Ø20–220 mm – Square: 20x20 to 220x220 mm Ijdsztx Drspfx Amgoih 1. OVERVIEW & CAPABILITIES The MTP-FL3015R-6KW is an industrial fiber laser engineered for high-speed, high-precision processing of sheet metal and structural tubing. Built for demanding production environments across Europe, it combines flat sheet cutting and a 6m pipe rotary axis on a single heavy-duty machine bed. Material Cutting Thickness (6kW): • Carbon Steel: up to 25 mm (O2/N2) • Stainless Steel: up to 16 mm (N2) • Aluminum: up to 14 mm (N2/Air) • Brass: up to 10 mm (N2) 2. CORE CONFIGURATION • Laser Source: 6kW MAX Photonics (high photoelectric efficiency, 100k+ hrs life) • Cutting Head: Ospri with dynamic autofocus & thermal-protected water-cooled optics • CNC Software: FSCUT Bus CNC with integrated automatic nesting, fly-cutting & leapfrog motion • Drives & Motion: Inovance bus servo motors & Techmech precision planetary reducers • Transmission: High-precision linear guide rails & helical rack & pinion • Gas Regulation: Aventics proportional valve for automated O2 pressure control • Chiller Unit: Tongfei dual-circuit industrial water chiller • Safety & Fumes: Full protection enclosure with access interlocks + partitioned zone dust & smoke exhaust 3. MACHINE DIMENSIONS & TRANSPORT LOGISTICS Assembled Working Footprint: • Length: ~9,000 mm (Main cabin + 6,000 mm rotary bed extension) • Width: ~3,400 mm (Main cabin + electrical cabinet + chuck overhang) • Height: ~2,350 mm • Total Weight: ~9,000 kg Transport / Shipping Dimensions (Dismantled for Mega-Trailer / Container): • Main Machine Bed Unit: ~4,500 x 2,250 x 1,950 mm • Rotary Axis Bed Extension: ~6,200 x 850 x 1,200 mm • Ancillary Skid & Enclosure Panels: Standard crated pallets • Required Gateway/Door Access at Buyer Site: Min. 2,500 (W) x 2,200 (H) mm 4. EUROPEAN DELIVERY, WARRANTY & SERVICE • Delivery: Professional logistics arranged across all EU countries & mainland destinations. • Free Installation & Commissioning: On-site leveling, assembly, optical alignment, and software integration performed by Metal Technics Polska field service engineers. • Free Operator Training: Hands-on technical training for machine operators and programmers (software nesting, CNC operation, parameter tuning). • Warranty: 12-month full warranty on all mechanical, electronic, and optical component parts. • Service Support: Direct factory technical support, rapid spare parts dispatch, remote online diagnostics, and complete post-warranty service programs provided directly by Metal Technics Polska. Power Supply: 3-Phase 380V / 50Hz Branding: Custom Metal Technics Polska (MTP) industrial colors & livery.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Ijdpfx Amjztyxdogeih Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 2008, Technical details: voltage: 400 V/A total power requirement: 26 kW weight of the machine ca.: 690 kg coolant device: 134a dimensions L x W x H: 1,75 x 0,8 x 2,0 m Iiedpfx Amjyt Na Sjgoh The Riedel L16/29-TR3.24 cooling unit is an industrial water chiller manufactured by Riedel Kooling (Glen Dimplex Deutschland GmbH). It is commonly used for cooling laser machines, for example in TRUMPF laser systems. Device type: Industrial water chiller / laser chiller Application: Cooling of CO2 lasers, machines, and industrial equipment Design: Air-cooled liquid chiller Refrigerant: R134a *

Condition: used, Year of construction: 2006, Technical details: weight of the machine ca.: 609 kg voltage: 400 / 3 Ph / 50 Hz V dimensions L x W x H: 0,85 x 1,6 x 2,0 m Cooling of industrial processes Application = water cooling Water tank capacity 210 liters Refrigerant R22 Air intake via 4x mechanical air filters (750 x 750mm) 2x exhaust fan via ceiling Ø 500mm External operation. (Was used with a Trumpf laser cutting machine) * Isdpfxevdc Hve Amgjih

Condition: new, functionality: fully functional, Year of construction: 2026, Work area: 3,015 mm (sheet metal + tube) Laser power: 6,000 W – Chuangxin Clamping head: Ruika 240 Laser head: Baichu Control system: Baichu Servo / linear guide: Inovance / Penac Rack / gearbox: YYC / Motoli Chiller: Special Domain HTL Series (HTL3015 / HTL4020 / HTL6020 / HTL6025 / HTL8025 / DHTL12025) WE HAVE MORE TYPES OF LASERS, EVEN LASER BOX ROOM NEW – DS Series Fiber Laser Cutting Machine | Available in 6 models | Immediate delivery from stock Condition: new, Year of manufacture: 2025, Functionality: fully functional TECHNICAL SPECIFICATIONS: Max. processing sheet: 3,000 x 1,500 mm (DS3015) up to 12,000 x 2,500 mm (DS12025) Isdeymc Ucopfx Amgsih X-axis stroke: 1,530 mm (DS3015) – 2,530 mm (DS12025) Y-axis stroke: 3,030 mm (DS3015) – 12,030 mm (DS12025) Z-axis stroke: ≤150 mm (smaller models) / ≤200 mm (DS8025, DS12025) Max. XY speed: 120 m/min Max. XY acceleration: 1.2 g (DS3015) – 2.5 g (DS12025) X/Y positioning accuracy: ±0.03 mm (DS3015/DS4020) / ±0.05 mm (larger models) X/Y re-positioning accuracy: ±0.02 mm (all models) AVAILABLE LASER POWER OPTIONS: 1 kW / 1.5 kW / 2 kW / 3 kW / 4 kW / 6 kW / 8 kW / 12 kW / 15 kW / 20 kW MACHINE FEATURES: Welded steel frame with high-temperature aging treatment for long-term rigidity Gantry dual-drive structure for stable high-speed motion Aviation-grade aluminum beam and Z-axis High-precision rack and bilateral gear system Concave-convex follow-up cutting head for adaptive surface tracking Universal steel ball support table Multiple limit protection: induction limit, hard limit, origin limit AVAILABLE OPTIONS: Dust collector: 4 filters (5.5 kW) / 6 filters (7.5 kW) / 8 filters (11 kW) Stabilizer: SWF-30KVA up to SBW-150KVA INCLUDED SERVICES: 12-month warranty Spare parts availability Technical support and commissioning assistance CE documentation available upon request Sold by HawkTech s.r.o. – certified industrial machinery dealer, Czech Republic. Delivery to CZ, SK and EU. Price on request.

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Iedpfxsyk Eg Ns Amgjih Web Width 660 mm Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Dryer VITS gas dryer Folder Capable of folding up to A5 size Controls Includes a control panel with register control Tension control system Baldwin dampening Chiller unit, plus chilling system before folder

Condition: used, This listing is for the Hanwell 4000 Wireless Transmitter The unit is in full working condition and is ready for immediate release Key Features: Single & Dual Channel Options: Choose between single or dual thermistor channels to suit your monitoring needs. ​ LCD Display: Equipped with an LCD display showing real-time data readings and battery life. ​ Temperature Range: Measures temperatures from -40°C to +60°C, accommodating various storage conditions. ​ Long-Range Wireless Transmission: Utilizes low-power radio technology with a transmission range of up to 3 km over open ground. ​ Battery Life: Powered by a 3.6V AA lithium battery​ Memory Capacity: Stores up to 100,000 readings for single-channel units and 50,000 readings per channel for dual-channel units. ​ Applications: Ideal for monitoring temperatures in fridges, freezers, and chillers. ​ Compatible Sensors The transmitters are compatible with various thermistor probes, available separately, to meet specific monitoring requirements. ​ Specifications at a Glance Feature Specification Dimensions 110 x 80 x 35 mm Weight 200 grams Power Supply 3.6V AA Lithium Battery Battery Life Up to 2 years Operating Range 0°C to +60°C (non-condensing RH environment) Iijdpfxexv D H Ro Amgsh Storage Range -40°C to +60°C Accuracy ±0.1°C Radio Frequency 433–458 MHz (country-specific) Radio Power 10 mW Radio Range Up to 3 km over open ground IP Rating IP30

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel Iodpoxf Hv Hofx Amgsih - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, number of slots in tool magazine: 60, tool length: 315 mm, tool diameter: 160 mm, Equipment: chip conveyor, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. The machine is ideal for complex and high-speed machining thanks to its ISO 40 taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Axis travels: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum resolution of 0.001° Table: 630 x 500 mm, maximum load 500 kg Ijdpfx Aswt N Tyomgoih Rapid traverse: up to 50,000 mm/min Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece probing system, chip conveyor, coolant tank with pumps, high-pressure pump through spindle, spindle chiller, transformer, manuals, and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Condition: used, Year of construction: 2008, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 310 mm max. workpiece size X: 1050 mm max. workpiece size Y: 820 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg with AWF ( Automatic Wire Feeding ) U / V axis: 200 / 200 mm submerged cooling unit FANUC Series 310iS-WA5 control Automatic Wire Feeding (AWF) Additional precision rotary/indexing unit by Detlev Hofmann 6 axes according to the machine control Chiller included Work area lighting Glass scales on X/Y axes Touch probe Work tank interlock and wire break detection Machine weight: approx. 3,000 kg Isdpfsz D U H Uox Amgoih Connected load: 13 kVA

Condition: ready for operation (used), Year of construction: 2003, Centerless grinding machine manufactured in 2003. This KOYO 4515C features two available units, both equipped with FANUC LR Mate 200iD/7L loading robots and FANUC SR-6iA unloading robots. The first unit has 86,000 operating hours, while the second has 92,000 operating hours. If you are looking to get high-quality grinding capabilities, consider the KOYO 4515C machine we have for sale. Contact us for further details. • Quantity: 2 unitsUnit 1 • Operating hours: 86,000 h • SMC liquid cooler/chiller: Not includedUnit 2 Iedsz Hm R Repfx Amgjih • Operating hours: 92,000 h • SMC liquid cooler/chiller: Not included Additional equipment • FANUC LR Mate 200iD/7L loading robot • FANUC SR-6iA unloading robotUnit 2 • FANUC LR Mate 200iD/7L loading robot • FANUC SR-6iA unloading robot

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover Iedpfsz Ipzuox Amgjih • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis index time: 0.6 s per 90° • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package Iedpfx Aez Iqgrjmgeih • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2008, 2008 DMG Sauer Lasertec 80 Fine Cutting Laser Processing Cell with Fanuc Robot M16IB 20 Handling System & DMG Siemens 840D Powerline CNC Control Cell Comprising Load/Unload Palletised Loading Robot. Chiller, Dust Extractor, Filtration & Rofin Cutting Laser System. Details: Sauer Lasertec 80 Laser Cutting Machine. Axis Travel: 'X' Travel Approx 800mm, 'Y' Travel Approx 500mm, 'Z' Travel Approx 700mm. Maximum Working Width Approx 500mm, Max Cutting length Approx 800mm. Fanuc 6-Axis Modular Robot M-16IB 20, 20kg Pay Load with Stand Alone R-30IA Control. Robot Arm Reach Approx 1,600mm. Rofin DC 015 Cutting Laser System with Stand Alone Control 4763 4763 (2008). KKT Kraus Stand Alone Chiller System KLC19 N-L (2011). Rittal Top Therm SK 3304100 Cooling Unit. Keller Dust Extraction Stand Alone Unit with Aktor-Sensor Bus-System Digital Control. Iedpfx Amsz E Sabegoih Floor Space Required for Full Cell Approx 7,300mm x 5,000mm. Weight of Laser Processing Machine Approx 5,700kg. 3 Phase Power Supply, 415 Volt.Viewing Recommended.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Iijdpfoz Itlwjx Amgsh Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: used, System chiller ers Cooling capacity: 25.58 kW Ambient temperature: 32°C Chilled water outlet temperature: 15°C Chilled water inlet temperature: 20°C Pump pressure: 3.9 bar Connected load: 400V RAL 7035 Dimensions: L: 1650 x W: 900 x H: 1970 mm Refrigerant: R407C Iedpfxoxuriwe Amgeih

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: 3000w, type of cooling: water, compressed air connection: 1 bar, Equipment: cooling unit, dust extraction, Raycus fiber laser cutting machine for sale with a brand new, warrantied laser source, new lens, and new water chiller. The machine also includes an exhaust system and a voltage stabilizer. It can be tested in Hungary, or we can provide an online demonstration. Iiedpjy I Sd Defx Amgsh

Year of construction: 2026, condition: new, Stainless-steel cooling tunnel for rapidly and gradually cooling hot-filled products packaged in glass bottles, jars or cans. Controlled cooling helps preserve product quality and reduce the risk of thermal shock and container breakage. Containers travel through the tunnel while water spray nozzles cool them progressively. During this process, the water spray also cleans the exterior surfaces of the containers. Automatic temperature control and an integrated water chiller maintain a stable water temperature during operation. Features • Suitable for glass bottles, jars and cans • Gradual cooling by water spray nozzles • Integrated water chiller • Automatic temperature control • Manual and automatic operating modes • Integrated control panel with clear error messages • Adjustable conveyor speeds and automatic shutdown timers Iiodpfx Aoz Nd Imemgsh • Controls for inlet and outlet conveyors, the main tunnel conveyor, water-tank pumps and heating zones • Suitable for integration with conveyor systems The stainless-steel construction is suitable for hygienic food and beverage processing. The water-spray process cools the products while cleaning the outside of each container for a clean final package.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each Iijdpfez R Aa Rjx Amgeh