Used Holac Sect 200 for sale (16,398)

Condition: used, Farley Greene Sievmaster Rota 200 stainless steel sieve machine, centrifugal sieve. Basket diameter: 180mm x 810mm. Equipped with a control cabinet with a frequency inverter. Equipped with a mobile frame. See our other listings. Lajdpfx Aewyfztjmmjc VMA Wekerom.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters Ljdpfjzf Ibkjx Ammjac For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Lajdpfx Aszf Hi Hemmsc Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Year of construction: 1998, condition: used, coolant capacity 10 m3l/h Headroom 10 m operating pressure 2 bar voltage 420 V / 50 Hz motor speed 1430 U/min engine output 0,25 kW weight 10 kg Ljdpsuy U Syefx Ammjac normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, Laedpfx Ast Hllpemmsc • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L Lajdpfxozd Twns Ammsc dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2019, total length: 14,040 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,050 mm, color: grey, Year of construction: 2019, Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear Axle 3: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,300 kg Payload: 34,700 kg GVW: 42,000 kg Laedpszfg Ehsfx Ammoc Maintenance APK (Technical Inspection): valid until 01/2027 Identification License plate: OX-26-BB Additional Information Please contact Bob Beukers for further information.

Condition: ready for operation (used), Year of construction: 2005, A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible. Lajdpfx Aezf Nccemmec

Condition: excellent (used), Here, we offer a temperature shock test chamber with a 100-liter usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Ljdpfxjzfg Upo Ammoac Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Ljdpozf A D Hefx Ammoac Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Year: 1993 Tare: 6900 kg Laedpfxet D Apto Ammec We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 200W is a brand-new portable laser metal cleaning machine. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use even for a begginer. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 200 W machine characteristics: Cooling: Air Laser power: 200 W Machine size: 750x600x680 mm Laser source: JPT Weight: 46 kg Lsdpfx Aor Hbx Temmeac Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), functionality: fully functional, year of last overhaul: 2023, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 1,500 kg, input frequency: 50 Hz, electrical fuse: 16 A, Diosna D 200 A Plus spiral mixer for a maximum of 200 kg of dough Stainless steel bowl and kneading arm Lodezfxznopfx Ammoac 2 bowl trolleys robust design 2 speeds Connection: 400V, 32A-CEE plug Used machine Come and visit us!

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm Laodpjzd R T Tefx Ammsc With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances: < 40% of the lower explosive limit (LEL). Maximum temperature of the heating surface: over 750 °C. Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 sec. Enhanced recirculating air flow rate: 33 m3/h Total steam space: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TB) fixed at 300 °C Temperature selector limiter (TWB) adjustable above the nominal temperature by 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60Hz Rated current: 12.0 A, rated power: 6.0 kW, connected load: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Laedpjzd Rrcjfx Ammec We are happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Laodpsy N Ahcjfx Ammsc Widely used for bonding, sealing, gluing, and gasket making (gasketing) in the automotive and packaging industries. Benefits of FoamMelt Technology Faster Curing: The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Condition: used, mileage: 83,500 km, power: 110 kW (149.56 HP), color: blue, gearing type: automatic, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, = Further Options and Accessories = - Passenger airbag - Electric window regulators – left - Electric window regulators – right - Driver airbag = Notes = - To ensure we provide you with the best possible advice, we kindly ask you to schedule an appointment. Mr. D. Neidhart and J. Ebert will be happy to assist you. DENIM BLUE METALLIC PAINT, FABRIC / LEATHER / MICROFIBRE BLACK / ANTHRACITE, AMG STYLING FRONT SPOILER, SIDE SKIRTS, AMG SPORT PACKAGE, NIGHT PACKAGE, MIRROR PACKAGE, LIGHT AND SIGHT PACKAGE, SEAT COMFORT PACKAGE, CONNECTIVITY PACKAGE MID, THEFT PROTECTION PACKAGE, LUGGAGE COMPARTMENT PACKAGE, SMARTPHONE INTEGRATION PACKAGE, SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION ANDROID AUTO, TOWING DEVICE, BASIC BURGLARY AND THEFT ALARM SYSTEM (EDW), BLIND SPOT ASSIST, ACTIVE PARK ASSIST, ACTIVE LANE KEEPING ASSIST (CAMERA), AUTOMATICALLY DIMMING INTERIOR AND EXTERIOR MIRRORS, COLLISION WARNING WITH ACTIVE BRAKE INTERVENTION FCW-STOP, SPECIAL EDITION MODEL, MODEL DESIGNATION ON REAR LID OMITTED, THROUGH-LOADING OPTION, DOUBLE CUP HOLDER, PREMIUM SOUND SYSTEM, ECALL EMERGENCY CALL SYSTEM (HERMES), RAIN SENSOR, HARD DISK NAVIGATION, 8-SPEED AUTOMATIC TRANSMISSION, 10.25" COMBI DISPLAY, TIRE PRESSURE MONITORING (RDK) HIGH LINE / MID LINE, EXTERIOR MIRRORS LEFT & RIGHT FOLDABLE, TRAFFIC SIGN RECOGNITION, BLACK FABRIC HEADLINER, DIGITAL RADIO STANDARD DAB (DIGITAL AUDIO BROADCAST), AUTOMATIC CLIMATE CONTROL, AUTOMATIC HIGH BEAM ASSIST PLUS (IHC+), LED HEADLIGHTS DYNAMIC FOR RIGHT-HAND TRAFFIC, AVANTGARDE/STANDARD SUSPENSION, DARK TINTED GLASS, CENTRAL DISPLAY MID (9 INCH TO 11.5 INCH), HEATED DRIVER AND PASSENGER SEATS, AMBIENT LIGHTING, WIRELESS FRONT PHONE CHARGING, I-SIZE MARKING (ISOFIX SUCCESSOR), DRIVE MODE SELECTOR (AGILITY SELECT), REAR SEATBELT STATUS INDICATOR, PASSENGER SEAT WITH WEIGHT DETECTION, 2.0 LITRE DISPLACEMENT, R4 DIESEL ENGINE OM654, VEHICLE PRODUCTION LOCATION RASTATT Second owner (German vehicle). We are happy to offer you a quote for your trade-in vehicle. If you are interested in leasing or financing, we can provide you with a tailored offer. Metallic, alloy wheels, electronic immobilizer, ESP, navigation system, full service history, particulate filter, warranty, rain sensor, sport seats, electrically adjustable exterior mirrors, sports package, Bluetooth, on-board computer, hands-free system, multifunction steering wheel, Isofix, light sensor, traction control, non-smoker vehicle, start/stop automatic, lane keeping assist, emergency braking assistant, blind spot assist, alarm system, armrest, electric tailgate, leather steering wheel, emergency call system, tire pressure monitoring, shift paddles, sound system, voice control, touchscreen, USB, traffic sign recognition, glare-free high beam, winter package, distance warning system, ambient lighting, WLAN/Wifi hotspot, Apple CarPlay, Android Auto, fully digital instrument cluster, inductive smartphone charging, automatically dimming interior mirror, foldable passenger seat, speed limiter, high beam assist, tinted windows, electrically foldable exterior mirrors, distance warning system. = Further Information = Engine displacement: 1,950 cc Ljdpfxjyhld No Ammeac Number of owners: 2 Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2020, Note: - No workpieces (molds) included - (blue) Ljdpfxozfib Eo Ammjac - No forklift, etc., available on site. - Oils must be taken away.

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Laodpfx Amou Eu Tnomoc Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: excellent (used), Year of construction: 2007, operating hours: 56,800 h, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition full service history still in production . The machine have one hydraulic core and one single air eject year 2007 . Lsdpfxozcwv Tj Ammeac

Condition: excellent (used), Year of construction: 1995, Digital display Swing diameter 120 mm Turning length 700 mm Spindle speed 2000 rpm Lajdpozfx S Tofx Ammsc Tailstock

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg Ledpfjy Tw Tzox Ammjac ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system Lodpfx Amjx Ux E Usmjac ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE Ljdpfxox Uz Rmo Ammjac TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, controller manufacturer: MAZATROL, controller model: Mazatrol SmoothG CNC, workpiece diameter (max.): 695 mm, This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control system, it ensures precision and efficiency. The main spindle supports up to 5000 rpm, while the second spindle reaches 6000 rpm. A great opportunity to buy this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Machine Benefits Technical Machine Benefits 1. Capacity:- Maximum Swing: 695 mm- Maximum Machining Diameter: 380 mm- Maximum Bar Work Capacity: 65 mm2. Spindle:- Main Spindle Chuck Size: 8 inches- Main Spindle Maximum Speed: 5000 rpm- Second Spindle Chuck Size: 6 inches- Second Spindle Maximum Speed: 6000 rpm3. Turret:- Number of Tools: 12- Maximum Speed: 5000 rpm4. Axes Travel:- X Axis: 234 mm- Y Axis: 100 mm- Z Axis: 625 mm- W Axis: 585 mm5. Control System:- Mazatrol SmoothG CNCInstalled Options : EIA / ISO programming Spiral machining EIA 3D compensation Rotation function Geometric functions Scaling External data I/O Shape compensation Thread cutting cycle Sub C-axis control Inverse time feed Polar coordinate input G54.1 additional work offsets Synchronous mill tapping Variable 600 macro sets Cylinder & polar coordinate interpolation EIA helical tap cycle EIA pattern cycle Seamless corner control Variable acceleration control Rapid overlap Lead error compensationMachine Hours : Power on time: 12,929 h Auto operation time: 17,565 h Auto cutting time: 15,375 hEquipment included: Turrets: 2 × revolver head – one on each side of the machine Driven tools: 1 × driven tool on the Z axis 1 × driven tool on the X axis Tool holders: Fixed holders for drilling Fixed holders for external turning Lsdpfjyk Tg Rox Ammjac Extra Information Full equipped version with C axis / Y axis / Subspindle / Long bedMachine still under power