Used Hydropneumatic Clinching Pliers for sale (174)

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System Rcsdpouycgfjfx Ankod - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: ready for operation (used), Year of construction: 2019, This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Rcedpfx Aex Nr Sqjnkjd Additional equipment • Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. • Leveling element (1 set = 4 pieces) with stud bolt M 12x100. • Feed side – left. • Feed roller conveyor URB 290, Length 3000 mm. • Feed adapter for URB 290/400. • Outfeed roller conveyor URB 290, Length 2000 mm. • Removal adapter for URB 290/400. • Connecting piece for machine, attachment on the right. • LM 55 M/man. Length stop, Measuring length 2000 mm. Machine Benefits Technical Machine Benefits • Automatic saw with a roller conveyor feed side length of 1500 mm and a discharge side length of 1000 mm. • Sheet metal tray for setting the machine. • Control unit attachment of the control unit to the swivel arm. Extra Information Machine still under power

Year of construction: 1979, condition: good (used), Hydraulic hose press, crimping tool, crimping machine, crimping jaws, crimping tool, hose press Rcsdjzbirkepfx Ankjd -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Condition: as good as new (ex-display), Year of construction: 2026, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm ----- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15" touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor, and software licenses. Item 1.2 Part number 942.5203 DS hydropneumatic feed unit Item 1.3 Part number 723.0121 2 pcs. DS saw blade for wood Bevel/Angle/Flat tooth - Positive Item 1.4 Part number 942.5236 2 sets of DS combined workpiece clamping Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the Materials from above. (Free access to the worktable) Pneumatic horizontal clamp - Anti-rotation clamping cylinder with pressure piece. The clamps can be individually selected via the saw's control system. The clamping sequence can also be set via the control system. Includes safety pre-tensioning pressure. Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.5 Part number 942.5241 DS350 table support grooved (standard groove, special grooves according to customer specifications available on request!) Item 3.1 Part number 945.2007 Packaging DS350 (transport frame) ----- Total price in this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the Offcuts for butt-jointed glazing beads instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Item 2.1 Item number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders, rotationally secured - 2 cylinder holders with clamping levers ----- OPTIONAL accessories, at extra cost upon request: ----- Item 4.3 Item number 942.5237 DS software "Extra Length" (subsequent steps must be confirmed) Sequence control incl. hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a timed sequence. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.1 Item number 944.1023 GMF 3000mm caliper complete set (1500 mm plus 1500 mm extension) Includes charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing beads. Rjdpfxeyy A Ike Ankscd Functionality For use on doors and large window sashes, the GMF caliper can be mechanically extended safely and quickly to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1 mm Resolutio...

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: L030748, overall weight: 2 kg, warranty duration: 3 months, pressure: 7 bar, The Scell-it® E-312NP pneumatic riveting tool for self-clinching nuts offers reliability, precision, and functionality, making the installation of self-clinching nuts quick and easy. Below, we provide additional information regarding the replacement of the nose/mandrel, stroke adjustment, and self-clinching nut installation, to enable you to fully utilize the potential of this tool. Nose/Mandrel Replacement: Detailed instructions for replacing the nose and mandrel can be found in our comprehensive operating manual. If you intend to use self-clinching nuts of different diameters, it will be necessary to change the nose, mandrel, and adjust the tool accordingly. Consult the instructions to learn how to make these changes and adjust the mandrel length to the size of the self-clinching nut. Self-Clinching Nut Installation: After performing the startup procedures and adjusting the stroke, insert the self-clinching nut into the pre-drilled hole. Place the mandrel in the self-clinching nut and press the tool. The mandrel will automatically seat itself in the self-clinching nut. Press the tool trigger to clamp the self-clinching nut onto the component. The release will occur automatically after the self-clinching nut has been clamped onto the component, allowing you to release the tool. If the tool is not released from the self-clinching nut, press the button on the back of the tool to force the release. Stroke Adjustment: The tool stroke must be adjusted to the component on which the self-clinching nut will be clamped. The E-312NP riveting tool allows stroke adjustment from 1 mm to 7 mm. To adjust it, follow the instructions below: Precise stroke adjustment is crucial for effective self-clinching nut installation. Here are some tips for controlling stroke adjustment: The stroke can be set from 1 mm to 7 mm. The graduated scale on the tool accurately indicates the set stroke. To increase the stroke, move the adjustment slider towards the front of the tool, while simultaneously turning the knob to the left. Then release the slider, ensuring that it is re-seated on the head. The cursor will indicate the range of the set stroke. To decrease the stroke, follow the same procedure, turning the stroke adjustment knob to the right. Our self-clinching nut riveting tool is designed to allow precise stroke adjustment and ensure optimal installation results. If the stroke is incorrectly adjusted or the self-clinching nut has a quality defect, the mandrel release may be difficult. In this case, use the "anti-block rod," which is included in the kit. Insert it into the hole in the base of the sleeve and turn it to the right to release the self-clinching nut, as shown in the illustration in the manual. Rsdpozc Dx Ijfx Ankocd

Year of construction: 2017, condition: ready for operation (used), Swivelling angles: 45°/90°/135°, max. speed: 2800rpm, working length: 5350mm, saw blades: 2 carbide-tipped saw blades 420x30mm, extraction connection: 160mm, compressed air connection: 6-8bar, power per motor: 2.2kW, length: 4200mm, weight: 900kg. Features: hydropneumatic saw feed, digital display, center support, handwheel, four pneumatic clamping cylinders, electrical control for parallel operation of machine and extraction system, fixed stop 24mm next to the fixed saw unit, adjustable via scale, with documentation. An on-site inspection is possible. Rjdpfx Anozaq D Eokjcd

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9588, Reconditioned Production Ready！ Rsdpfjzlaucjx Ankocd Ref Code:1027 Prisma 600 Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing Rcodpfx Asza Dzdenkjd - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: used, Technical details: capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 Rcsdpou Nwc Hefx Anked insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Hose package 4 meters new *

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V Rcedpsu Nigwefx Anksd total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 Rjdpfx Anou Id Rujkjcd bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( Seri Bıçak Değiştirme Sistemli), • Robust mechanical structure capable of processing high-quality aluminum profiles. Redsviq Ryopfx Ankecd • Center registration for aluminum profiles within an angle range of -45 / +45 degrees. • Easy blade group replacement system. • Easy angle adjustment with mechanical supports. • Support system adjustable for all types and brands of profiles. • Cutting speed adjustment with a hydropneumatic system. • Blade storage rack (for 4 blades). • Cutting fluid spraying system. • Max. processing diameter: 160 mm. • Max. blade size: 200 mm. • Min: 90 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 201 S PVC ORTA KAYIT ALIŞTIRMA ( SERİ BIÇAK DEĞİŞTİRMELİ), • Robust mechanical structure capable of processing PVC profiles with high precision • Intermediate profile adjustment for PVC profiles within an angle range of -45 / +45 degrees • Easy blade set replacement system • Easy angle adjustment with mechanical supports • Adjustable support system for all types and brands of profiles • Cutting speed adjustment with a hydropneumatic system • Blade storage rack (for 3 blades) Rodpfx Aszd Nyfjnkocd • Max. processing diameter: 160 mm • Max. blade size: 200 mm • Min: 90 mm

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Rcsdpfxey Ulvao Anksd Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Redpfx Aou D Tz Uonkocd Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: excellent (used), Year of construction: 2016, Offer for KP-500 Optim KP 500 Optim, year of manufacture 2016 Rsdsy U E Hxspfx Ankscd - Infeed table length: 5.2 m - Main motor: 5.5 kW - Outfeed table length: 6.0 m, can be shortened if necessary Still in production, very little used (virtually unused). For more information, see the link.

Condition: ready for operation (used), For aluminum, cutting length 6000mm Saw blade diameter maximum 450mm Swivel range: 90°- 45° pneumatic With hydropneumatic saw feed Redpfxswvqt He Ankjcd Horizontal workpiece clamping Vertical workpiece clamping Fixed unit on the left, the right unit is movable Digital positioning control Roller track moving with the right saw unit

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Rcsdpfx Asfitbwonksd Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Redpfsfcbb Hex Ankjcd

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Minimum quantity spraying device Rcedjucpqtopfx Ankod Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 350 mm, roller diameter: 90 mm, Key advantages: clinching technology without rivets – no additional fasteners required, low operating costs, fast and repeatable joining process, intuitive HMI touch screen, compact and robust design, power supply 230 V / 50 Hz, operating pressure 6 bar, easy to use and maintain, perfect for serial and workshop production. Application: ventilation and HVAC, metal enclosures, home appliances, automotive, control cabinets, sheet metal components manufacturing. Rjdpfx Ajy Rrcrsnkecd Shaft diameter: 90mm, Throat depth: 350mm, Sheet thickness range (mild steel): 2x 0.5-1.2mm, Press force: 76KN, Power supply: 230V Air pressure: 6 BAR Weight: 500kg

Condition: new, How does it work? The magazine is manually fed with deck boards and stringer boards, then the machine automatically organizes the decks in the right position for nailing. The machine is constructed for continuous and reliable production of pallets. It combines professional precision with a user-friendly setup. The size of the manufactured pallets can be easily readjusted in just a few minutes. Deck Size: Min / max length: 600 mm - 1 600 mm Min / max width: 600 mm - 1 400 mm Stringer Min / max length: 600 mm - 1 400 mm Min / max width: 75 mm - 150 mm Min / max thickness: 16 mm - 28 mm Min / max wing: -20mm - +50mm Deck board Min / max length: 600 mm - 1 600 mm Min / max width: 75 mm - 150 mm Min / max Thickness: 16mm - 28mm Specifications: Operators | 1 Length | 4,0 m Width I 3 m excluding platform ladder Rcsdpfswdurpjx Ankjd Height | 3,6 m Power | Electric: 14 kW, 3x400 V+N, Hydraulic: 22 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 400L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 24 deck boards/min Standard equipment: 2 cassettes for deck boards 3 channels for stringer feeding 3 cassettes for stringer 1 mechanical clinching plate Nailing system: Electric or hydraulic beam nailing, 1 nail box (9 nails), Individual nail picking, nail indication system, 9 nailing hammerheads Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: excellent (used), Overview The Single Head Wire Stitching Machine is a versatile and reliable solution for wire stitching applications, suitable for both pads and brochures. Designed for consistent performance in print finishing environments, it offers the flexibility to handle standard and loop stitching with ease. Built with a robust and durable construction, this machine is well suited to long production runs while maintaining accuracy and stability. The adjustable working table allows quick changeover between saddle stitching for brochures and flat stitching for pads, making it ideal for varied workloads. An advanced wire feed system ensures smooth and precise stitching, even when working with thicker or digitally printed materials, providing consistent results across a wide range of stock types. Optional loop stitching conversion parts are available, allowing the machine to be adapted quickly to suit different production requirements. Key Features Supports both standard and loop stitching for pads and brochures Heavy-duty construction for reliable, long-term operation 25mm stitch and 40mm stab capacities Adjustable table for saddle or flat stitching configurations Maximum speed of up to 203 staples per minute Table size: 700 × 240 mm Patented wire feed and cutting system for accurate, consistent stitching Suitable for thicker and digitally printed materials Optional loop stitching conversion kit available for added flexibility Why Choose the Hohner Economy 25/40 Ideal for print shops requiring a flexible stitching solution for multiple applications Simple changeover between different stitching styles reduces downtime Capable of handling a wide range of materials, including heavier stocks Reliable and durable design suited to regular production use Cost-effective alternative to larger multi-head stitching systems Optional loop stitching capability adds value and expands service offering Specifications Manufacturer Hohner Model Hohner Economy 25/40 Condition Used Mechanic cycles per minute [staples] 203 Clinched staple 25mm Capacity Stabbed from both sides 40mm Capacity Rcodpeyyb Rdefx Ankjd Stitching table size [mm] 700 x 240 Working height [mm] 880 Throat depth from clincher box to machine body [mm] for pad stitching 95 Throat depth from clincher box to machine body [mm] for saddle stitching 290 Maximum number of stitching heads 1 Crown width [mm] 14 Round wire (standard) No. 21 – 30 Flat wire 0,70 x 0,35 mm – 0,90 x 0,78 mm Electric requirement 230/400V Single or 3phase Net weight [kg] 200 Dimensions (L)900mm x (W)700mm x (H)1540mm

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. Rcjdpfx Aneyl Tr Nokod The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Condition: used, Year of construction: 2023, Year: 2023 - the machine was put into operation in 2024 Status: very good, functional Counter: 640.000 only Rcodpfx Ansy Hq H Ujked Configuration: - pliers size: "L" Specifications: - speed: 300 packages / h - maximum height on pallet: 1400 mm - automatic pallet switching