Used Hydropneumatic Clinching Pliers for sale (188)

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: MP2506992, input voltage: 400 V, total width: 960 mm, total length: 1,060 mm, total height: 2,250 mm, pressure: 200 bar, overall weight: 675 kg, stroke length: 200 mm, control voltage: 24 V, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), pressing force: 6 t, Hydraulic Clinch Press Miller MP645E, with optional vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-57KN (6 ton) Throath depth 450mm Nwsdpfx Agsztcykorsl Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2250mm x W 960mm x D 1060mm Weight ca. 675 Kg Electrical connection 400V, 2.2 KW  Berghof PLC control system  In-house programming  Automatic press force adjustment with counter; position-based  Memory for up to 1,000 parameter sets and 200 programs  Electronic and mechanical safety system with distance monitoring  Safety electronics by MURR & EATON  Safe processing of conductive and non-conductive materials  Linear length measurement system  Electronic (indirect) press force measurement  Proportional valves for electronic press force control  Peripherals and digital I/O by Beckhoff  Made in Germany; in-house service support Optional  Tooling set with 14 or 33 punches and dies  4-station die holder with position sensor; parameters for each of the 4 stations can be selected individually and stored in the program  Vibratory feeder for automatic transport of press-fit elements  Singulation and feed unit for automatic processing of clinch fasteners  Length measurement of automatically fed press-fit studs or bushings  Force/displacement diagram displaying the most recent press-fit data  Custom requirements—such as program selection via barcode scanning, production data output, etc.—can be programmed in-house  Adaptation to handling systems or robots possible; communication via PROFIBUS, PROFINET, EtherCAT, or Modbus We are happy to answer any questions you may have; on-site visits are possible by appointment. Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Nodpfx Agjza Dzdjrewl Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. Nodpfx Ajxa Evzsgrewl - Type: F200 - Motor power: 30 kW - Single-shaft design - Max. height of processed material: 120 mm - Min. length of processed material: 2 m

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Njdpfx Agey Ulvaerowl Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: ready for operation (used), Year of construction: 2022, This 3-axis PERTICI 600TSE Circular Metal Saw was manufactured in 2022. It features a cutting length of 5100 mm and a saw blade diameter of 600 mm. The machine is equipped with a hydropneumatic feed mechanism and a double-cylinder clamping system for enhanced precision. If you are looking to get high-quality cutting capabilities, consider the PERTICI 600TSE machine we have for sale. Contact us for further details. - Cutting Length: 5100 mm- Saw Blade Diameter: 600 mm- Controlled Axes: 3 controlled axes (Electronic positioning X-axis, controlled tilting angles)- Cutting Angles: Inward up to 45°, Outward up to 20° (Variable angle range 20° - 135°)- Feed Mechanism: Hydropneumatic cylinder with infinitely variable feed adjustment and rapid return, linear guide rails with recirculating ball bearings- Clamping System: Double-cylinder horizontal clamping system and vertical material clamping system for both heads- Safety System: Local pneumatic drop-down safety guards on both heads- Control Unit / Display: Industrial PC panel with 15" TFT Touchscreen monitor, USB port, Ethernet port (LAN)- Operating System: Windows Embedded- Control Features: Memory capacity up to 1000 profile data, cutting list optimization, online diagnostic assistance Nwedpfxezzp Nbj Agrjl

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip Nodpfx Ajy Ri Huogrjwl For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm stroke 70 mm work stroke 10 mm Nwjdpfx Asy Umf Aogrel table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg

Year of construction: 2013, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Njdpfx Agszx U S Nsrswl Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Year of construction: 2014, condition: ready for operation (used), overall weight: 4,000 kg, total width: 1,300 mm, total height: 2,200 mm, product length (max.): 2,540 mm, Metal Band Saw manufactured in 2014. This JAESPA Classic 423 DGH features a heavy steel construction and a low-vibration grey cast iron saw band table. It includes an NC control system with a 9-inch colour touchscreen for cutting program management and automatic positioning for mitre cuts. If you are looking to get high-quality cutting capabilities, consider the JAESPA Classic 423 DGH machine we have for sale. Contact us for further details. Nwodpfx Agjzzavxorol - Saw Frame Construction: Heavy steel construction, double-mounted close to the saw band, precisely guided by a hydraulic feed cylinder- Saw Band Table: Low-vibration grey cast iron with a machined surface and T-slots- Control System: NC control with 9-inch colour touchscreen for preselection and control of cutting programs (cutting lengths, piece counts, band speed, and angular position)- Mitre Cuts: Automatic positioning of the saw frame for mitre cuts on both sides between 30° and 90°- Upper Saw Band Guide: Automatically self-adjusts to the required workpiece height- Operating Modes: "HAND" for single cuts and "AUTO" for fully automatic series production cuts- Material Transport: Motorised feed (pliers vice / Zangenspannstock)- Material Clamping: Hydraulic clamping via short-stroke cylinders on both sides of the saw band- Saw Band Drive: Infinitely variable control via a frequency-regulated electric motor- Band Tensioning: Regulated mechanically via disc springs and monitored via manometer- Saw Band Length: 4570 mm- Net Weight: Approx. 4000 kg (incl. 3000 mm roller conveyor)- Dimensions (Required Footprint): 1300 mm x 2540 mm (without roller conveyor)- Height: 2200 mm- Additional Equipment: Electrically powered chip brush, generous coolant tank with integrated chip collection container, 3000 mm roller conveyor

Condition: used, Year of construction: 2018, saw blade diameter 550 mm weight ca. 650 kg Under-table saw for aluminum and PVC Nsdpjzvhm Ujfx Agrowl Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! The saw was rarely used; it served as a backup machine

Condition: used, functionality: unexamined, Avdel riveting machine Nodpjzlguiefx Agrjwl - 2x Avdel 07531 air pressure booster for hydropneumatic riveting tool - 2x Avdel 07535 riveting tool (1 missing chuck for rivets) - Shipping possible for an additional charge.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Nsdpfx Aezvz Dtsgrowl Weight: 360 kg Operating principle: hydropneumatic Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm

Year of construction: 2007, condition: good (used), - Used machine - Saw blade: 400 mm - Saw blade tiltable 0° left to 0° right - Hydropneumatic saw blade feed Nwedpfxjy E Itps Agrel - Horizontal and vertical clamps - Motor power: 1.8 kW / 400 V - Cutting width: 242 mm - Cutting height: 140 mm - Incl. measuring roller conveyor 4000 mm - With digital readout and handwheel - Ex-stock, loaded free of charge

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points Nsdpfx Agjw U Ehborjwl * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####

Condition: like new (used), Year of construction: 2018, machine/vehicle number: STHP 80KN, functionality: fully functional, pressing force: 8 t, table width: 300 mm, total length: 200 mm, total width: 510 mm, total height: 1,320 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr with two-hand operation - floor model with and base frame Nwedpjt Rhb Isfx Agrel The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Nwedpfx Ajzvrf Isgrjl Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: like new (used), Year of construction: 2024, Wegoma double miter saw with 3-axis control Double miter saw DS140 Working length 4000 mm, hydropneumatic saw feed Pneumatic swivel 45°/90°/45° 4 clamping cylinders, pneumatic 2 carbide-tipped saw blades 500 x 80 mm Left saw head fixed, right saw head movable Digital display Positioning control EPS 220 For double miter saws, including EPS220 control for precise length positioning. With industrial touch panel 15 inches (dust and splash-proof) Display for manual input of cutting data or via data set integration - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer via USB or network possible. - Interface to measuring ruler incl. interface software. Incl. control cabinet, motor, and software licenses. - Short and long cut setting Nwodpfx Agozhx A Dsrol - Automatic cutting (can only be activated via software in conjunction with entry protection) Positioning electronics for stepless automatic swivel from 45° to 135° 4.00 92062530 Feed roller conveyor 3 meters for DS mounted on the mobile unit Machine immediately available Ex works

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM Nwjdpfxsixz A Eo Agrel USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° Nwjdeu Nigwopfx Agrjl voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Nsdpox Ecg Ujfx Agrowl Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Year of construction: 2024, Cutting length: 3700 mm Drive: 2 x 3.0 kW motor 2 saw blades, diameter 600 mm / Z = 138 New saw feed: hydropneumatically prepared for installation of an electronic control system Aggregate on the left is fixed, on the right is movable R700i database for max. 400 basic profiles, 1000 color profiles USB and network connection / remote maintenance Cutting angle: 20° - 90° - 135° Integrated memory TFT color touchscreen Aggregate adjustment: stepless motorized aggregate adjustment 20° - 135° including section clamp (1x per aggregate) Indication of swivel range: swivels outwards Nodpfxjzhpbdo Agrowl Clamping device: vertical clamping device with mounting plate for holding profile-related parts Feed from the right: movable roller conveyor, support length 2900 mm, width 250 mm Stops: socket Extraction Software stop for overlengths Stop for short parts, pneumatically extendable Label printer: RAPID-specific label printer RED-300, installed in the control panel R700 sealing clamping device Control cabinet, freestanding R700 waste conveyor Cutting length 3.7 m Inclined conveyor 1000 mm horizontal x 2500 mm vertical Storage location: customer

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 Nwedjw U Eg Rspfx Agrsl * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, C-frame press for clinching technology Pressing force: 4.8 t Nodpfx Agsy Ey Hzorewl Air pressure: 6 bar Total stroke: 32 mm Power stroke: 3 mm No tools included

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Nedpfx Ajyl U Sqsgrswl Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: excellent (used), Overview The Single Head Wire Stitching Machine is a versatile and reliable solution for wire stitching applications, suitable for both pads and brochures. Designed for consistent performance in print finishing environments, it offers the flexibility to handle standard and loop stitching with ease. Built with a robust and durable construction, this machine is well suited to long production runs while maintaining accuracy and stability. The adjustable working table allows quick changeover between saddle stitching for brochures and flat stitching for pads, making it ideal for varied workloads. An advanced wire feed system ensures smooth and precise stitching, even when working with thicker or digitally printed materials, providing consistent results across a wide range of stock types. Optional loop stitching conversion parts are available, allowing the machine to be adapted quickly to suit different production requirements. Key Features Supports both standard and loop stitching for pads and brochures Heavy-duty construction for reliable, long-term operation 25mm stitch and 40mm stab capacities Adjustable table for saddle or flat stitching configurations Maximum speed of up to 203 staples per minute Table size: 700 × 240 mm Patented wire feed and cutting system for accurate, consistent stitching Suitable for thicker and digitally printed materials Optional loop stitching conversion kit available for added flexibility Why Choose the Hohner Economy 25/40 Ideal for print shops requiring a flexible stitching solution for multiple applications Simple changeover between different stitching styles reduces downtime Capable of handling a wide range of materials, including heavier stocks Reliable and durable design suited to regular production use Cost-effective alternative to larger multi-head stitching systems Optional loop stitching capability adds value and expands service offering Specifications Manufacturer Hohner Model Hohner Economy 25/40 Condition Used Mechanic cycles per minute [staples] 203 Clinched staple 25mm Capacity Nedpoyyb Rdofx Agrswl Stabbed from both sides 40mm Capacity Stitching table size [mm] 700 x 240 Working height [mm] 880 Throat depth from clincher box to machine body [mm] for pad stitching 95 Throat depth from clincher box to machine body [mm] for saddle stitching 290 Maximum number of stitching heads 1 Crown width [mm] 14 Round wire (standard) No. 21 – 30 Flat wire 0,70 x 0,35 mm – 0,90 x 0,78 mm Electric requirement 230/400V Single or 3phase Net weight [kg] 200 Dimensions (L)900mm x (W)700mm x (H)1540mm