Used Hzm 825-T Profi Teleskopradlader for sale (72,178)

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Fgedpfx Asyvuvlskhof

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 125 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. Fgodpfxoupxcts Akhsf 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Fgedpfx Akoxr Ng Ujhsf Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/20-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds Fgjdpfoxyyguox Akhjf - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Year of construction: 2010, condition: good (used), Hobart commercial dishwasher for under-counter installation Fedpfx Akec Utiqjhegf with dosing pump for detergent and rinse aid Completely made of stainless steel If you have any questions, please call Thank you Please call me to discuss further details.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min - Max. Max. operating pressure 10 bar Fsdpfx Aou Nhh Tekhjgf - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS - Electrical connection Voltage / frequency 400/50 V/Hz - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch - Length 1520 mm - Height 1530 mm - Weight 291 kg

Condition: used, Year of construction: 2024, front tire size: 650/60R38, rear tire size: 750/70R44, Equipment: compressed air brake, Section Control Load weight rear wheels 2x 650kg Reversible fan Cool box / Infotainment package Contour Assistant Track guidance basic package RTK Novatel TI / HEadland Agronomy basic package Telemetry basic package / Fjdpfxstt I Nvo Akhegf

Condition: used, Year of construction: 2024, front tire size: 710/60R38, rear tire size: 900/65R46, Equipment: compressed air brake, Section Control Load weight rear wheels 2x 1,000kg Fendt Stability / Control Tire pressure control system Fendt VarioGrip Reverse fan Cooling box Hood camera / Infotainment package Lane guidance RTK Novatel TI Headland Contour Assistant / Agronomy Basi Fsdpfxett I Nyo Akhogf

Condition: used, Year of construction: 2023, front tire size: 440/65R24, rear tire size: 540/65R34, Equipment: compressed air brake,

Condition: used, Year of construction: 2023, Equipment: compressed air brake, 2 dosing rollers 4 scraper floor chains Pick-up feeler roller Carriage center Loadsensing / control line BG2 Loadsensing BG4 2-stage scraper floor motor Working lights / 3 x LED Side swing-out blade frame Access door to the loading area ISO / BUS operation Fgedotlq E Sopfx Akhef

Condition: used, Year of construction: 2023, 3 dosing rollers Scraper floor gearbox protection 4 scraper floor chains Pick-up feeler roller / in the middle of the wagon Loadsensing control cable BG2 Loadsensing BG4 Working lights / 3 x LED Swing-out blade frame on the side Access door to the loading area ISO BUS / operating system Fodot Dxm Uspfx Akhjgf

Condition: used, Year of construction: 2022, front tire size: 710/60R34, rear tire size: 900/60R42, Equipment: compressed air brake, front power take-off, Tire pressure regulation system VarioGrip reversible fan / Fsdpfxjucqckj Akhjgf

Condition: used,

Condition: used, Year of construction: 2023, front tire size: 650/60R38, rear tire size: 750/70R44, Equipment: compressed air brake, front power take-off, Section Control Load weight rear wheels 2x 600 kg Tire pressure regulation system / VarioGrip Fendt Stability Control Ball forced steering left Ball forced steering / right Tablet holder Hood camera Cool box Terminal 12-inch roof Track guidance / RT Fsdpfxjtt I N Dj Akhjgf

Condition: used, Year of construction: 2024,

Condition: used, Year of construction: 2024, front tire size: 600/65 R34 151D MI -67 12 DW18, rear tire size: 710/70 R42 173D MI -55 10 DW23, Equipment: compressed air brake, Infotainment package 4x camera connections 4 USB connections Front weight 1,250 kg / rear wheel weights 2x 600 kg RTK NovAtel lane guidance Section Control / Fgjdsrxtcgepfx Akhef

Condition: used, Year of construction: 2024, PTO shaft Walterscheid W2480- / Fedpjud H Hhofx Akhsgf

Condition: used, Year of construction: 2022, front tire size: 710/60R38, rear tire size: 900/65R46, Equipment: front power take-off, VarioGrip / tire pressure regulation system Fgjdpfx Aoucqcqskhef

Condition: used, Year of construction: 2021, front tire size: 440/65R24, rear tire size: 540/65R34, Equipment: compressed air brake, front-end loader,

Year of construction: 2014, condition: excellent (used), I sell the automatic magazine HOMAG BARGSTEDT Profi TLF210/21/10, year 2014. Fjdpfjyzcc Rex Akhogf Storing 22 Positions of Material 2,80 x 2,10m Total size 21 x 10 m x h.3,5m. Stapel / Abstapelanlage 2 Posizionen. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Security fence system fully complete ! Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Bending machine from the only and reliable manufacturer PROD MASZ® High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench RED-2200/0.8 incl. transport rollers Bending machine Folding bench with side cutouts for bending from top to bottom. Thanks to him you will finish your window sill. In the machine construction there is a place for curved processing at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: Fgsdpecv S Dtofx Akhsf - maximum working width: 2080 mm - Bending performance: up to 0.8 mm (steel sheet) - all non-ferrous metals 30% more bending capacity - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 m - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 250 kg The roller scissors (max. cutting capacity 0.8 mm / steel) Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee. Price: 2200 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Our machine park is regularly supplemented, we use the best machines to guarantee the highest quality. We know all of our devices inside out. For years. And as a producer, we are always up to date. bending edge only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Fgjdpfx Ashbcxmjkhsf Roller shears + 350 Euro The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cut-outs to the side Recess 60mm / 45 ° Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: new, Year of construction: 2025, Sheet metal folder RED 2200/0.8 + wheels Bending machine with side cutouts for bending from up and down. Thanks to it, you will make your window sill ready. In the machine's construction there is a place for bent processing at a height of 6 cm up and down. It is a modern sheet metal folding machine that bends sheet metal from three sides. max. working length: 2200 mm bending: 0.8 mm steel sheet 1.2 mm (aluminum, copper, zinc) bending beam: 15 mm bending angle max. 150 degrees max. opening: 80 mm weight: ca. 250 kg Fgsdpfocqu Dgex Akhjf

Condition: new, Year of construction: 2026, "Prod-Masz" your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their particular flexibility, performance and versatility. Folding beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cutouts to the side 60mm / 45 ° recess Price: 5100.00 EUR Fgsdecv S H Aopfx Akhof rotary shears + 350 Euro Delivery date: every week We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Year of construction: 2025, Prod-Masz - your competent partner for metal, sheet metal and steel processing. We are constantly expanding our offer to meet the demands of the market. Thanks to many years of experience, highly qualified staff, high quality, aesthetics and reasonable prices, we gained the stable position in the market and the trust of customers. Absolute novelty from Prod-Masz! Bending beam only 15mm for sheet steel 1.2mm to 2m. RED 2060 / 1.2mm incl. 2 levers for opening the bending beam Technical specifications: - maximum working width: 2060 mm - Bending performance: up to 1.2 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop rear frame for holding the sheet front depth stops Fgjdpfjcch Eqex Akhsf - Weight: approx. 420 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Delivery date: 2-4 days We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)