Used Index Er 25 Long Turning Device for sale (59,970)

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm Bdodpfx Ashgw Uxjphef total power requirement / kW

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum Bdsdpfxet Run Ie Aphof steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Condition: ready for operation (used), adjustable Bdedpfjha Hhzex Aphef

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Bsdpjyhq A Dofx Aphodf Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Gear ratio: 40:1 Spindle bore: 26 mm Bsdpfxexcbp No Aphodf - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken - Swivel mechanism is stiff

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Bdsdpfexxmf Iox Aphsf Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: refurbished (used), Year of construction: 1990, functionality: unexamined, Pattern turning device with height adjustment and electric feed motors. Height adjustment is electric. The price is for the machine as is. Optionally, we can also offer a complete overhaul. Bdodpox E Dbcefx Aphof

Condition: used, Year of construction: 1982, functionality: fully functional, Technical data: 1-drive unit 30 tons / 1 loose unit 30 tons Bdsdpfx Apsu R Saishjf -max. max. load 60 to. -Container diameter 500-4,000 mm -turning speed 130 - 850 mm/min. -roller diameter 400 mm -roller width 210 mm -Drive power 2 x 0.37 kW/400V -Weight of drive unit 1,850 kg -Weight of loose unit 1,150 kg -Length x width x height Drive unit 4,100 x 1,100 x 830 mm -Length x width x height Loose unit 3,250 x 650 x 830 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Bjdpfox U Tchex Aphedf Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Bedpfx Apoznmxmohjdf

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Z-axis: 1,400 mm, total height: 2,400 mm, total width: 2,560 mm, overall weight: 13,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, product length (max.): 5,460 mm, number of axes: 8, This 8-axis Index G250 turn-mill centre was manufactured in 2004. It includes a Knoll chip conveyor, EMAG cooling unit, and ISI mist extraction system. The machine features a hydraulic power chuck with a clamping range of 125–152 mm and an overhead gantry loader for automation. If you are looking to get high-quality turning and milling capabilities, consider the Index G250 machine we have for sale. Contact us for further details. - Control Unit: Siemens SINUMERIK / INDEX C 200-4D- Rated Voltage: 400 V AC (3 Phase, 50 Hz)- Rated Current: 74 A- Rated Power: 43 kW- Control Voltage: 24 V DC- Tool Turret: 12-station tool turret with driven/live tool capability (individual powered tools are not included in the scope of delivery)- Workholding: Main spindle with hydraulic power chuck / collet system, SMW-Autoblok SLU-3-ZS hydraulic power chuck (clamping range 125-152 mm)- Steady Rest: SMW-AUTOBLOK / Original SMW Steady Rest (Type: SLU-3-28, Clamping range: 12-152 mm, Max. operating pressure: 60 bar)- SMW Autoblok steady rest: • hydraulic/self-centering steady rest • mounted on its own lower slide • suitable for providing additional support for long or thin workpieces- Tailstock unit with a rotating center on the right side of the work area for supporting longer workpieces- Hydraulic System: Integrated hydraulic power unit operating at 95 bar pressure- Automation / Gantry Loader: Promet Automation gantry loading system overhead- Coolant / Chip System: Knoll chip conveyor / coolant unit (YOM: 2004)- Chiller Unit: EMAG Chiller / Cooling Unit (YOM: 2016, Cooling capacity: 9.5 kW, Refrigerant: 2.5 kg)- Mist Collector / Air Cleaner: ELBARON / ISI RON / A 2500 Electrostatic Air Cleaner / Mist Extractor (YOM: 2004)- Documentation Included: Complete documentations, operating manuals, etc.- Transport Dimensions (L x W x H): Approx. 5460 x 2560 x 2400 mm (width reducible to 2450 mm)- Machine Weight: Approx. 13,500 kg Technical Specification Counter Spindle No Driven Tools No Bdedpfx Apjznc Nbehjf

Condition: used, functionality: fully functional, input voltage: 230 V, Hello, we are offering a used paint shaker/agitator from the German manufacturer Collomix, model VIBA 25. The device is in good condition and fully functional. It is suitable for containers up to 25 kg. The paint is brought into vibration by a shaking motion, which causes it to mix itself perfectly. We have used this system to mix screen printing inks. However, the system can also be used for a wide variety of paints and coatings. The pre-set time of 1, 2 or 3 minutes can be selected using the selector buttons. The system is currently located in our warehouse in 93476 Blaibach, Bavaria. Bjdpszmcqiefx Aphedf If you have any questions, please feel free to write to us.

Condition: good (used), 25 linear meters of tire racking Used, very good condition, see photos Height 2.5 m Depth 50 cm Bay load 9000 kg Beam length 2.1 m Beams with load capacity/shelf 1000 kg Negotiable price: €1,950.00 net ex warehouse Offer includes: + 12 units of frames, pre-assembled, 9-ton bay load, depth 50 cm, height 2.5 m + 66 units of beams, length 2.1 m, 1000 kg load capacity/shelf + 132 units of locking devices + 24 units of concrete anchors Load signs Other configurations available on request! Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel structure platforms immediately available • 30-50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. Bedpfx Asfdik Isphodf 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), For sale: SEW-EURODRIVE RF17 DT63L4/B03 geared motor with a three-phase motor with a power of 0.25 kW and a built-in electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of use resulting from operation are visible. The scope of sale includes exactly what is shown in the pictures. Technical data: Manufacturer: SEW-EURODRIVE Model: RF17 DT63L4/B03 Power: 0.25 kW Supply: 3× 230 V Δ / 400 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 94 rpm Torque: 25 Nm Gear ratio: i = 13.84 : 1 Brake: 230 V AC, 3.2 Nm Protection class: IP54 Bdjdpfx Apeznn E Ijhjf Insulation class: B Operating mode: S1 Design: IM B5 Weight: 10.84 kg Country of manufacture: Germany

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm Bodpfx Apoxvp S Eshodf -Weight: 1.4 kg

Condition: used, TECHNICAL DETAILS - maxi diameter : 26 [mm] - maxi feeding length : 125 [mm] - spindle speed : 366 – 5020 [rpm] - number of spindles : 6 - central block stroke with cone : 85 [mm] with hydraulic : 200 [mm] - cross stroke with cone : 36 [mm] with hydraulic : 56 [mm] - dimensions : 5 728 x 1 080 x 1 816 [mm] - weight : 5 200 [kg] EQUIPMENT Bjdpfx Ajuhanajphedf - sub-spindle - foot and drum

Condition: used, TECHNICAL DETAILS - maxi diameter : 26 [mm] - feeding maxi length : 125 [mm] - spindle speed : 366 – 5020 [rpm] - number of spindles : 6 - central block stroke with cone : 85 [mm] with hydraulic : 200 [mm] - cross stroke with cone : 36 [mm] with hydraulic : 56 [mm] Bdsdeuham Aepfx Aphsf - dimensions : 5 728 x 1 080 x 1 816 [mm] - weight : 5 200 [kg] EQUIPMENT - sub-spindle - counter operation device - 5 drilling units - all the tool holders - foot and drum

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Bdedpfx Apszhi Uwehjf Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: good (used), Internal item no.: 25088 Bedpfxoxu Dcvo Aphedf Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: used, Year of construction: 2012, swing diameter 560 mm Bodex Emp Nepfx Aphjdf turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Bdjdpfsyx Tzrsx Aphof Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: as good as new (ex-display), Fig. No. 1408 Like-new VDI40 DIN 69880 tool holder collet chuck Collet: DIN 6388-A; Type: 444E Item No. 433011- Bedpfek Nz Ehex Aphjdf More used VDI40 tool holders can be found at www.wk-sales.de or upon request Collets DIN 444E or ER 40 with clamping nut. Collet not included in the scope of delivery Outer diameter: 50mm Outer clamping length 65mm

Condition: used, 2x 6-spindle bar automatics as a package Make: INDEX Model: MS25E Bdsdpfeylhlqox Aphef (1 machine defective, used as a parts donor)

Condition: good (used), Index GE42 Tension cylinder Bdedpfefbup Rsx Aphjf GG2713.2101 good condition

Condition: excellent (used), Year of construction: 1994, CNC Lathe Automatic Index GS42 Control: Index C200-8 (Sinumerik 880) Spindle bore: 42 mm, two machining turrets Turret 1 – X=120 mm, Z=220 mm, 12 tool stations (6 driven), part handover Turret 2 – X=120 mm, Z=80 mm, 8 tool stations (4 driven) Dynamic C axis Bar feeder with magazine INDEX MBL 3500 mm, including complete set of reduction sleeves Set of clamping collets – 10 pcs Driven tool holders – 5 pcs Standard VDI20 tool holders – 5 pcs Bodpfx Apox E Sqljhodf The machine is 100% operational and in excellent condition (maintains tolerances up to 0.001 mm)