Used Intermediate Proofer for sale (824)

Condition: used, mileage: 115,050 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 6040X ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available at autonext - mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Next service in 631 days Like-new rear brakes Like-new all-weather tires, front and rear Loading lift system SPS for loading and unloading Save and Rescue: Loading lift system for personal safety, TÜV tested according to DIN EN 795 up to 14 kN, EN 365 and TS 16415 Sortimo workshop conversion Rear-wheel drive Upon request, we offer an aftermarket trailer hitch for only 599,- Euro, and if possible, an increase in trailer load capacity up to 3.5t. ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Parking package with reversing camera * Reversing camera * 2nd battery (auxiliary battery) interior * Airbag passenger side * Acoustic package * Armrest, driver and passenger door Dedpew Ndt Ssfx Adrecn * Mounting rails for roof rack * Passenger-optimized center console (without storage compartment in the center console on the right) * DAB tuner (digital radio reception) * Entry handle on the rear pillar, rear right * Suspension: Stabilization Level II * All-weather floor mats * Vehicle without vehicle lowering * Speed limiter (cruise control) * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * Connector strip for electrical connections (driver's seat box) * Air conditioning system controlled (Tempmatik) * Cable duct on rear portal * Cable duct on side wall * Marker lights, side * Navigation system for MBUX multimedia system * Parameterizable special module * Tire pressure monitoring system * Spare wheel in driving condition * Spare wheel carrier under frame end including jack * Windshield wipers with rain sensor * Mud flaps, rear * Mud flaps, front * Safety belt system with warning system (passenger side) * Seat equipment: Comfort headrest, driver's seat * Seats in the cab: Passenger double seat * Seats in the cab: Passenger seat, heated * Seats in the cab: Driver's seat, heated * Seats in the cab: Driver's seat with lumbar support * Seats in the cab: Suspension seat, comfort, driver's side * Seats in the cab: Driver's seat box, low * Fuel tank cap, red * Battery isolation relay * Rear door step * Interior trim in cargo/passenger compartment: wood, high (up to the roof) * Interior trim in cargo/passenger compartment: wheel arch cover (plastic) * Rear wall cladding * Lashing rails in the cargo area - side wall on the railing * Lashing rails in the cargo area - side wall on the roof frame * Fleece battery 92 Ah * Reinforced front axle * Thermal insulation, driver's cab * Thermal insulation, cargo/passenger compartment * Auxiliary heater (air), electric * Auxiliary heater (hot water) * additional heat exchanger * Intermediate restriction, cargo area sliding door Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection Dcedpfx Adszn Ipysrjn • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: used, mileage: 32,885 km, power: 130 kW (176.75 HP), first registration: 06/2025, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Hill start assist * Exhaust system, EU6e (EA) * One towing eye at the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN compartment, and reading light (only with 2nd evaporator) * Sun visors, foldable and swiveling sideways, with wide-angle mirror on the passenger side * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors, left and right, convex, with integrated LED turn signal and wide-angle area * Front-wheel drive * Emergency brake assist * Rubber flooring in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * H2 - Normal roof * Rear step, extending across the entire width * Immobilizer, electronic * Parking assist (PDC) at the front and rear * Grab handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running light with assist function and coming/leaving home function * Electrical connection block and preparation for body and equipment mounting * Premium interior noise reduction measures * With UNECE CS&SU * 4-cylinder diesel engine, 2.0L, type 03N.G * Cruise control * 8-speed automatic transmission * Glove compartment with lockable lid, illuminated * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Plastic grab handle on the B-pillar in the passenger compartment * Automatic climate control system "Climatronic" in the cab * Side windows in the passenger/cargo area, rear left, fixed * Side windows in the passenger/cargo area, rear right, fixed * LED main headlights with LED daytime running lights Djdpfjy Rwr Eox Adrecn * LED interior lighting concept in the passenger/cargo area * Anti-glare interior mirror * Child safety lock * Traffic sign recognition * Rear view camera system with dynamic guidance lines * Leather multifunction steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Driver alertness and fatigue detection system * MAN SmartLink * 130 kW (LD) * Fog lights including cornering lights * MAN Connect * MAN Media Van Navigation Business (12.9 inch) * 12V socket, cupholder * Tire pressure monitoring system * L3 - Standard * Three-point automatic seat belts with height adjustment * Side windows at the front and rear, and rear windows in * Heat-insulating glass, darkened from the B-pillar (Privacy) * 12V sockets in the cab * "ergoActive" suspension seat, left * "Comfort Plus" seat, right * Seat belt buckle switch, driver and front passenger seats * Seat covers in leather / Alcantara * Seat heating for driver and front passenger seats, separately adjustable * Side marker lights * 2 remote control keys * Approved as a 3.5t vehicle * Start-stop system with brake energy recuperation * Side wind assist * Windshield wiper intermittent operation with light and rain sensor * Mud flaps at the front and rear * Special purpose vehicle version with up to 3 seats * Keyless Go * Sliding door, right, with intermediate locking * Active lane keeping assist * Preparation for alcohol interlock * Intelligent speed assist * Multifunction front camera * Footwell lighting * Digital radio reception (DAB+) * Front axle (1,800 kg payload) * Side windows in the passenger/cargo area, front left, fixed * Side windows in the passenger/cargo area, front right, fixed * Comfort telephony with LTE and wireless charging * Lashing eyes in the vehicle floor

Condition: good (used), For sale: 2 automatic PrintEX screen printing carousels + tunnel + 3 IR flash dryers For sale: a complete set of screen printing machines for textiles from PrintEX. The set includes: 1. Automatic PrintEX 11/14 screen printing carousel 11 colors / 14 pallets 2. Automatic PrintEX 6/8 screen printing carousel 6 colors / 8 pallets 3. Drying tunnel for prints The tunnel has an air-blowing function, making it also suitable for use with water-based inks. 4. 3 IR flash dryers The set includes 3 IR/flash dryers for intermediate drying of prints between colors. Dcjdpfsztn Elox Adrsn The machines have very low usage hours for screen printing equipment. The equipment is robust, industrial-grade, and designed for printing on t-shirts, sweatshirts, bags, and other textiles. The set is ideal for a garment printing company, an advertising agency, or someone who wants to expand their print production. The machines can be viewed on-site. Pick-up in person / transport is the buyer's responsibility. Price: negotiable Please contact me.

Condition: used, mileage: 387,500 km, power: 220 kW (299.12 HP), first registration: 09/2019, fuel type: diesel, number of seats: 46, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal number: 1061 * S 415 LE * 1st German hand (Serviced at Evobus / MB) + Will - Registration * 220 kW / 299 HP - EURO 6 D * Low original mileage! * New turbo in 06/2025 * Retarder (5-stage) also via foot brake pedal * V max 95 km/h * ZF automatic Dcodpfx Aev Riy Ajdren * BAS - Brake Assistant * ESP, ASR, ESP incl. ASK * ENR * Kneeling * Tires: 295/80 R 22.5 * First registration 09/2019 * Large air conditioning system for passenger compartment * Additional air conditioning for driver's seat * Auxiliary heater * LED fog lights * Side windows simply tinted * Folding ramp * Automatic engine oil refill system * Driver's microphone * Fire alarm system for monitoring the engine compartment * USB socket at driver's seat * Driver's seat rotatable, armrest, lumbar support, lumbar motor for driver's seat * Driver's seat air conditioning * Current: 1/39 seats - can be fitted with 6 more seats -> then 46 seats * Current: Luggage rack behind seat row 2 on the left with an intermediate floor * Standing places * Exterior display LAWO (front) with control unit * VEHICLE WAS WRAPPED - therefore the paint is clean, one dent on the side * Base color: white * etc. * All information without guarantee * We reserve the right for prior sale * We refer to our terms and conditions * Speaker in the passenger compartment

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm Dcsdowcdw Eepfx Adren -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg

Condition: used, empty load weight: 6,000 kg, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, raise/lower function, ABS (anti-lock braking system), underrun protection, lateral aluminium side guards, support legs, storage box, stanchions. Body: 3-axle timber transport trailer with 6 Ecco Steel stanchion sockets, 3x 9t SAF axles, disc brakes, first axle liftable, interchangeable 2" kingpin, unladen fifth wheel height approx. 1150mm, minimum free front distance from fifth wheel center approx. 2240mm, lightweight frame made of high-strength fine-grained steel. Dcjdpfxjwkvqas Adren Loading height approx. 1540mm! Multiple units in stock from insolvency! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale, and errors!

Condition: new, Year of construction: 2026, functionality: fully functional, Roller Stand – Straight Roller The roller stand with a straight roller is a compact and robust solution designed to support the transport and machining of long components such as profiles, pipes, and shafts. Made of durable steel and equipped with height adjustment, it is an essential accessory for workstations with band saws, milling machines, and cutting machines. As a universal roller conveyor, it ensures stable and smooth material movement, improving work ergonomics and operator safety. Main advantages of the device Simple roller design – enables smooth movement of components with various shapes and lengths. Adjustable working height from 600 to 900 mm – allows adaptation to different machine tools. Stable steel base – provides secure support and resistance to deformation. Foldable construction – facilitates storage and transport. Low weight (20 kg) – allows easy relocation between workstations. Dedpsvu Suqefx Adrocn Design and technology The roller stand is based on a steel frame equipped with a single rotating roller made of wear-resistant material. Thanks to its simple yet durable construction and compact dimensions, the device can be used as an independent support unit for linear roller conveyors or as a standalone material support. The height adjustment system allows the working level to be adapted to the specific requirements of the workstation, both during cutting operations and machining processes. Precision and work efficiency The straight roller conveyor significantly improves operator workflow by eliminating the need for manual lifting or stabilizing of long components. The use of a rotating roller enables smooth longitudinal movement of the workpiece, reducing resistance forces and improving safety. It is a practical support solution when working with large materials, especially during repetitive operations and serial production processes. Applications The roller stand is suitable for many industrial and workshop applications: Metalworking and structural fabrication workshops Woodworking shops and production lines Cutting, welding, and milling workstations Intermediate transport of components during production processes As an auxiliary roller conveyor, it is ideal for both individual workstation configurations and integrated production lines. Standard equipment Transport roller with rolling surface Welded and powder-coated steel frame Height adjustment mechanism with locking system Foldable design for compact storage Technical specifications – Roller stand (straight roller) Parameter Value Working width 350 mm Height adjustment 600–900 mm Transport dimensions (package) 530 × 515 × 95 mm Weight 20 kg

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min Dcodpezafi Nsfx Adron straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Dcjdpfszatf Eox Adren Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t Dsdpfxjzrprws Adrocn dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW Dcjdpjzrpu Esfx Adrjn weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,500.00 (net), dismantled, packaged, and loaded at the location! Item No. 12 Manufacturer: Stow Type: unknown Year of manufacture: 2014 From ground floor to landing: approx. 10 steps (with the 1st step at the level of the landing) From landing to upper floor: 12 steps (with the 12th step at the level of the upper floor) Distance between steps, presumably approx. 18.5 cm (to be confirmed) Dsdpfx Adozqz Smsrecn Width: to be confirmed With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), 517 USED Dough proofing chamber, proofer W&P. EXTERNAL DIMENSIONS (in cm): - W: 90 - L: 260 - H: 230 INTERNAL DIMENSIONS (in cm): - W: 85 - L: 250 - H: 202 Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile. Djdpfx Adszwxqmsrjcn

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging. Dcsdpfx Aoztc Nfedrjn

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Dcsdjzt I Ruepfx Adrjn

Condition: new, Year of construction: 2025, - Mechanical structure capable of cutting aluminum profiles at angles between 22.5° and90° with high speed and quality - Precise mechanical structure offering automatic positioning for 22.5°, 45°, and 90° angles,and manual positioning for intermediate angles - Stress-relieved cast and welded parts to ensure constant high-speed precision - Profile fixing pistons - Right-hand profile support stand - Safety covers - Single-head operation - 7'' touch screen - Ethernet connection - Ø 550 mm saw - Coolant spray system Dodpfxjzuv Eco Adrscn - Hydropneumatically controlled, adjustable saw feed rate

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Dodpfjzlwm Ajx Adrscn Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, Excerpt of Equipment Gooseneck * with angled front corners approx. 45° and rear angle approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood decking approx. 30 mm thick Loading Platform * in double-extendable design with rear angle approx. 500 mm x 8° * 6 pairs of lashing rings that fold outwards (LC 5,000 daN) * 4 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings positioned horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood decking approx. 48 mm thick, with diamond plate decking over the axles * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Kingpin * JOST kingpins (mechanical) with 2-speed gear for approx. 24 t lifting capacity (approx. 50 t test load) Braking System * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) * Topcoat, single color in RAL 3002 carmine red * Rear section metallic and painted in RAL 9010 (pure white) * Metallic paint not possible Steel Construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System Dcsdpfxszlwm Ne Adrsn * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15 pole * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front panel, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holder on the front panel (± 5kg) * A spare wheel holder in front of the front panel * Electro-hydraulic power unit (± 45kg) * Steering from the front and rear by means of cable remote control operated via push buttons, with single-axle control (without installation in the tractor unit) * Mounting at the rear of the gooseneck for aluminum loading ramps * European reflector plates (red-yellow) at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * On the gooseneck and at the rear panel, one holder each on the left and right for warning signs including socket * Mounting rail for aluminum loading ramps at the rear of the vehicle * A holder for a rotating beacon at the rear of the trailer * Galvanized folding supports under the angle of the loading platform * A mud flap at the rear of the trailer * Manual and description on USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining the axle loads including load diagram.

Condition: used, machine/vehicle number: 26662, Year of construction: 2020, operating hours: 630 h, load capacity: 1,400 kg, lifting height: 2,844 mm, fuel type: electric, mast type: simplex, construction height: 1,990 mm, .: 26662 Device details: Year of manufacture: 2020 Load capacity: 1400 kg Lifting height: 2844 mm Recorded operating hours: 630 h Mast type: Standard Dedpjzlcfdjfx Adrjcn Mast height: 1990 mm Length/Width/Height: 1950 / 800 / 1230 mm Operating weight: 1171 kg Battery from: 2020 ---- Equipment: * DGS made of Plexiglass ---- Additional device information: ---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We would also be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Intermediate sale and errors for this offer are expressly reserved. In the dealer business, the device is sold in its AS IS condition, without any refurbishment. All information is subject to change without notice, errors and omissions excepted.

Condition: used, machine/vehicle number: 26663, Year of construction: 2022, operating hours: 825 h, load capacity: 1,400 kg, lifting height: 4,144 mm, fuel type: electric, mast type: simplex, construction height: 2,640 mm, .: 26663 Device details: Year of manufacture: 2022 Load capacity: 1400 kg Lifting height: 4144 mm Recorded operating hours: 825 h Mast type: Standard Mast height: 2640 mm Length/width/height: 1950 / 800 / 1250 mm Operating weight: 1390 kg Battery from: 2022 ---- Equipment: * DGS made of plexiglass ---- Additional device information: ---- The operating hours are generally recorded hours. We would be happy to offer you the appropriate transport. We have a further 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, we also offer rentals! We would also be happy to buy your OLD one. Do you have any questions? Dcsdpfxozlcfke Adrjn You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Intermediate sale and errors in this offer are expressly reserved. In the dealer business, the device is sold in its current condition, without refurbishment. All information is without guarantee, subject to errors and changes.

Condition: used, maximum load weight: 29,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, next inspection (TÜV): 02/2027, loading space length: 9,500 mm, loading space width: 2,430 mm, loading space height: 2,400 mm, loading space volume: 55 m³, Year of construction: 2020, Equipment: ABS, Stock no. 5845 Approx. 55 m³ Kempf tipper semi-trailer with combination door / aluminum rims / pallet-width ----* Manufacturer: Kempf * Type: SKM 35/3 * First registration: 05/2020 * Gross vehicle weight: 35,000 kg * Unladen weight according to vehicle registration document: 5,950 kg * Payload: 29,050 kg * Axles: 3x SAF with 1st axle as a lift axle / disc brakes * Suspension: Air suspension with raising and lowering function * Tires: 385/65 R 22.5 approx. 50% remaining, on aluminum rims * Volume: approx. 55 m³ (9.50 m long x 2.43 m wide x 2.40 m high) * Color: Chassis gray, tipper body silver-gray/blue, tarpaulin gray * TÜV (German technical inspection): 02/2027 * EBS Wabco * Combination door (1/3 to 2/3) with grain slide in the middle * Grain chute with dust bag * 1 cross member * Pallet-width * Smooth exterior walls * Roller tarpaulin with central locking * Operating platform at the front with ladder in the middle * Full-load supports (outrigger supports) * Individual fenders * LED tail lights * LED reversing lights * Entry inside the trailer at the front left * Loading pressure gauge * Spare wheel holder * Approx. 4.00 m aluminum ladder on the right side of the chassis * 2 x PVC toolboxes in the middle left * Foldable underrun protection * Aluminum air tank German trailer!! German documents!! Dcodpfx Aszi N Elodrjn Note on possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or intermediate sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, Year of construction: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion coating), intermediate drying, an electrostatic coating zone (booth/powder coating station), and a curing oven. The workpieces are transported through the system by a conveyor system. Our company, ROMER®, plans, manufactures, and assembles complete powder coating lines. Djdpscv Nl Rsfx Adrscn Our systems can be inspected and tested at our facility in Hürth near Cologne. Request a quote for a system tailored to your specific application.

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection Dcjdpfx Aor H Df Iedrjn - Documentation - 400V

Year of construction: 2008, condition: used, machine/vehicle number: 820505-01+02, Lg. no. 24208 + 24209 2 pcs. Load turning devices Technical data : - Load capacity per ROTOMAX 25 t - max. torque 14000 Nm - Rotation speed 2.6 m/min - Operation via manual remote control with intermediate cable - Length of intermediate cable approx. 8 m - Load turning belt with 160 mm belt width - Mounting pin 140 mm - Connection 400 V / 3.0 kW each Dcsdpfx Adstpbwheron - Space requirement per unit approx. W 2200 x H 1300 x D 900 mm - Weight per unit approx. 2100 kg